Adding a second controller - 3750 G integrated WLC

Hello all-

I am new to this, please bear with me.

I was responsible for adding a second WLC in the customer's network. They currently have a 47 access support 4402-50 points. The customer has purchased a 3750G w / integrated WLC (50AP) anticipate the addition of several APs, but the Bill is pending. In the meantime, the le client customer wants the WLC new to help balance the load of the AP. The existing WLC is running 6.0.182.0. The customer has a mixture of APs 1130, 1140, 1240 and 1250. They begin to use the features of N.

The two controllers are now on the same subnet. 10.1.113.x I've updated the code on the 3750G_WLC to match the other controller. Here are some questions I have now:

1. am I correct in thinking that I should set these two controllers in the same group of mobility?

2. am I right in thinking I have to manually configure each access point to point to the controller, I want that he be associated? In other words, is there a function for AUTOMATIC load balancing? (NOTE: the customer just bought and install WCS)

3. once exceed US 50 APs, any other configuration change will have to happen?

It's all a bit sketchy for me because we are right on the edge. Then. at the moment we are N + 1 request to balance between the two. Once exceed US 50 APs, we are no longer N + 1 and must elect which APs are a priority in case of failover.

Some advice on the installation of this second WLC, in the network and any recommendations you may have to manage these 47 existing APs is appreciated.

See you soon-

Thus, when you set a primary controller and secondary, you specify the name of the controller. 5.2 and above you can also specify the IP address of the management of this controller. The AP will learn about these controller through mobility group set on the controllers.

Lose the controller, I didn't set the priority after the fact. I meant that if you try to set priority (for the event that a controller has been lost), then you would create the priority on high tab override the configuration of the AP. When you first install, you would like this.

If you don't set a primary/secondary, the AP should know the controllers of each controller, and when the controller sends its replies of discovery, it must specify only one to balance the load of. Or something like that.

The bottom line, is that if you do not have a primary/secondary set, then the AP discovery process should get your AP on the less busy controller. It is the primary/secondary definitions which kind of replace it, which is what I called a "manual"... balancing

-What helps more?

Tags: Cisco Wireless

Similar Questions

  • HP Pavilion 510n - adding the Second hard drive?

    A few questions...

    1. is there a size limit for any player second, I would like to add?

    2. What is the procedure for adding the second disc?

    -J' added a second drive to an OLD pc before and it involved linking the second slot on an IDE cable, change the jumper on the slave drive settings, and modify the bios settings... it would be similar?

    Hello TSobiech, it is always best to ask to order a part that is not compatible with a certain system.

    The hard disk that you show the link should work perfectly. Even if it's an ATA100, and your system supports ATA33/66, this disc should still work but will be downclocked to ATA66 speed.

    Here is another link to a 250 GB IDE HDD if you might be interested.

    You won't notice much, if any, degradation in performance to the difference in speed. These IDE drives are higher than the price a SATA with the same capacity, but they are becoming harder to find.

    Since you want to be using as operating in car system, but just a backup drive, they want to make a difference.

    If you want to make use of the full speed of ATA100, you could add a map of IDE controller supporting ATA100, but I really don't think it would.

    Since you mentioned the intermediate layer of IDE as not being used, you can connect the new drive to this connector.

    Now, there are a few things that you should check that you install the new hard drive. These are the connectors of jumper on hard drives.

    This is the very small plastic with metal inserts, at the end of the hard drive where are the other connectors.

    I always use the CSEL (CS) on two hard drives. Readers may already have jumpers to this setting (jumpers connection), but if not, you must set two hard drives the selection of cables (CS).

    Since the current IDE hard drive is the boot hard drive and an ATA66, it must be connected to thin ribbon cable connector, as it is now, and the new hard drive attached to the middle connector IDE. The slowest speed of the two hard drives will result in two hard drives running at the slower of the two speeds. It will work very well.

    You need to partition and format the new hard disk before it can be used. This can be done from Windows if necessary.

    I hope this helps.

  • Add the Second controller IDE for Dell Dimension 5000

    We have a Dell Dimension 5000 that has proved to be a very capable workhorse.

    Since buying it we have replaced the DVD burner with a more quick/tough, added an IDE hard drive and added a second SATA hard drive.

    We would now like to add an another DVD burner or another hard drive IDE - anyway we need more IDE connections.

    Can we just add an another IDE controller in one of the free PCI slots?

    Will any make/model or someone at - it recommendations?


  • Satellite P300-16 t - adding a second drive HARD-success!

    I have added a second hard drive today for my Toshiba P300-16 t.

    I realized that I had a Toshiba SATA drive in a USB disk device that would spare - 250 gb.

    I improvised by removing the feet spread on the cover of the second cage to hard disk using a sharp knife. I put the Bank in place ensuring maximum safety. I also used a heat-resistant material (say what) to secure the drive up as readers are rarer than hen's teeth. I made sure that the reader also had room to breathe. The cover was then released and I turned on my computer and it found the new HDD, the installed drivers at home but hey presto! Another 250 GB to play with.

    Now, I did it is because I call four FSA in the United Kingdom but they weren't any help by providing a cage for the second disc.
    Two said they only deal with businesses and not individuals.
    Others have said that they only provide power cables and batteries!
    Hope that my Tosh never goes down and I must use their services...

    Anyway, I don't recommend anyone do what I just - it is possible if you are a bit adventurous...

    Have you used the Hotglue?

    Surely, you can get the FSA HARD drive media. Unless there is a global shortage on cradles P300: p

  • Will, adding a second video card to the top of my total video memory or each card is discreet?

    Very well.  I have a desktop which is a few years old, and I need to more video memory in order to run some new games smoothly.  So far, my 'helper' on my desktop HP has been useless for helping me find this basic information:

    -Info on my diet

    -I still have how many slots have opened

    Also, will adding a second card to the top of my video RAM in all, or do I have to replace the primary card?

    Thanks for any help!

    Info:

    Model name d4996t

    Microsoft Windows Vista - Home Premium Edition (x 32)

    Current vidcard NVIDIA GeForce 8800 GTS

    Motherboard Info:

    Motherboard
    -----------------------------------------------------------------------------

    System Board

    Chipset Intel Q35/Q33/P35/G33 SouthbridgeIntel 82801IR (ICH9R)


    Box spring

    Manufacturer ASUSTeK Computer Inc. productBurbank


    BIOS

    Name of the vendor American Megatrends Inc. Release Date 2008-12-17 the string of BIOS Version 5.21 ROM size1.00 MB


    Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:0

    Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB


    Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:1

    Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB


    Hello

    Review the following sugggestions:

    Sapphire Radeon $6850---135 after rebate, 128 GB / s---> probably the best price/performance ratio

    Sapphire Radeon $6870---170 after rebate, 134 Gbit / s---> 3D ATI support

    EVGA NVIDIA 560 TI DS$---240 after rebate, 134.5 Gbps

    EVGA NVIDIA $560 ---160 after rebate, 128.2 Gbps

    Corsair CX600 POWER block $---50 after rebate---> measure your current diet and make sure that it matches (5.9x3.4x5.5)

    ' HP ' how-to 'articlesshould be useful.  Read the reference document which I had quoted above.

  • HP Envy 17 K2Z68AV: Adding a second hard drive for HP Envy 17 K2000 Series notebook PC

    So, I have been looking around for more information on adding a second HDD/SDD in my model of laptop computer on the web, but can't find anything on my specific model. Many places say K-series laptops have only one hard drive Bay, and that you use a hard drive caddy optical Bay. Moreover, I found videos of very similar models being dismantled, which seem to have only room for 1 hard drive. However, I was told to support twitter HP want all 17 have 2 hard drive slots. Can I get a confirmation, just to be sure?

    Hey @MrMdr,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your Notebook HP ENVY - 17 t - k200 CTO, model #K2Z68AV and concerns with the second span. Looking to 256 GB SATA m2 (MLC) that could be used for storage only. It is a hard drive, but it fits differently than the main hard drive. Hereis a link to your manual page 2 which shows the specifications.

    It shows you how to install this on page 68 of the manual.

    Please let me know how it goes.

    By clicking on the Thumbs Up below, you can say thank you! .

    Thank you.

  • I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

    I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

    + System

    -Supplier

    [Name]  Microsoft-Windows-Security-Kerberos
    [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
    [EventSourceName]  Kerberos
     
    -EventID 3

    [Qualification] 32768
     
    Version 0
     
    Level 2
     
    Task 0
     
    Opcode 0
     
    Keywords 0 x 80000000000000
     
    -TimeCreated

    [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
     
    2991 EventRecordID
     
    Correlation
     
    -Execution

    [ProcessID] 0
    [ThreadID] 0
     
    Channel system
     
    Computer DC02.xxxxxxonline.com
     
    Security

    -EventData

    LogonSession xxxxxxONLINE.COM\xxxxxx
    ClientTime
    1:34:27.0000 03/01/2016 Z ServerTime
    Error code 0 x 19
    ErrorMessage KDC_ERR_PREAUTH_REQUIRED
    ExtendedError
    ClientRealm
    CustomerName
    ServerRealm xxxxxxONLINE.COM
    ServerName krbtgt/xxxxxxONLINE.COM
    TargetName krbtgt / * address email is removed from the privacy *
    ErrorText
    E file
    Line d3f
    30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

    --------------------------------------------------------------------------------

    Binary data:

    In the words

    0000: 54307730 010203A 1 044DA213 3049304B
    0008: 0203A01F 18A 11201 4F52161B 59454B 43
    0010: 494C4E4F 432E454E 6F724D4F 79656B 63
    0018: 03A 00530 30170102 0203A01F 18A 10301
    0020: 4F52161B 59454B 43 494C4E4F 432E454E
    0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
    0030: 30000402 0203 HAS 109 02A 21001 09300004
    0038: 010203 A 1 0402A20F 00

    In bytes

    0000: 30 77 30 54 A1 03 02 01 0w0T¡...
    0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
    0010: A0 03 02 01 12 A1 18 1F. ....¡.
    0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0030:30 05 A0 03 02 01 17 30 0. .... 0
    0038: A0 03 02 01 03 A1 18 1F. ....¡.
    0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0058:30 09 03 02 01 02 A2 A1 0... ¡¢
    0060: 02 04 09 03 02 A1 00 30... 0.¡..
    0068:01 A2 02 04 00 30 09 10... ¢... 0.
    0070: A1 03 02 01 0F A2 02 04... ¢...
    0078: 00                        .

    + System

    -Supplier

    [Name]  Microsoft-Windows-Security-Kerberos
    [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
    [EventSourceName]  Kerberos
     
    -EventID 3

    [Qualification] 32768
     
    Version 0
     
    Level 2
     
    Task 0
     
    Opcode 0
     
    Keywords 0 x 80000000000000
     
    -TimeCreated

    [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
     
    2943 EventRecordID
     
    Correlation
     
    -Execution

    [ProcessID] 0
    [ThreadID] 0
     
    Channel system
     
    Computer DC02.xxxxxxonline.com
     
    Security

    -EventData

    LogonSession xxxxxxONLINE.COM\xxxxxx
    ClientTime
    16:52:38.0000 02/01/2016 Z ServerTime


    Error code 0 x 19
    ErrorMessage KDC_ERR_PREAUTH_REQUIRED
    ExtendedError
    ClientRealm
    CustomerName
    ServerRealm xxxxxxONLINE.COM
    ServerName krbtgt/xxxxxxONLINE.COM
    TargetName krbtgt / * address email is removed from the privacy *
    ErrorText
    E file
    Line d3f
    30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

    --------------------------------------------------------------------------------

    Binary data:

    In the words

    0000: 54307730 010203A 1 044DA213 3049304B
    0008: 0203A01F 18A 11201 4F52161B 59454B 43
    0010: 494C4E4F 432E454E 6F724D4F 79656B 63
    0018: 03A 00530 30170102 0203A01F 18A 10301
    0020: 4F52161B 59454B 43 494C4E4F 432E454E
    0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
    0030: 30000402 0203 HAS 109 02A 21001 09300004
    0038: 010203 A 1 0402A20F 00

    In bytes

    0000: 30 77 30 54 A1 03 02 01 0w0T¡...
    0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
    0010: A0 03 02 01 12 A1 18 1F. ....¡.
    0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0030:30 05 A0 03 02 01 17 30 0. .... 0
    0038: A0 03 02 01 03 A1 18 1F. ....¡.
    0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0058:30 09 03 02 01 02 A2 A1 0... ¡¢
    0060: 02 04 09 03 02 A1 00 30... 0.¡..
    0068:01 A2 02 04 00 30 09 10... ¢... 0.
    0070: A1 03 02 01 0F A2 02 04... ¢...
    0078: 00                        .

    This issue is beyond the scope of this site which is for the consumer to related issues.

    To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

    http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

    http://social.msdn.Microsoft.com/Forum

  • ATER ADDING A SECOND HARDRIVE MY COMPUTER IS NOT ALLOWING ME to SAVE music to what HE SAID I'm not administrator that he

    Recently, I added a second hard drive and now although I can access my files from the original hard drive, it doesn't let me download files outside such as CD as it says I need to "contact the administrator"! Can you please help me solve this problem? Thank you.

    Hi Paul,.

    In Microsoft Windows XP, the special access permissions are customizable sets of permissions. This means that you can apply special access permissions to files or folders that are located on NTFS file system volumes. This article describes how to set, view, change, or remove special permissions for files and folders.

    Method 1: To take possession of the drive in disk management:

    a. click the Start button,

    b. Select Control Panel,

    c. click Administrative Tools then computer management

    d. open disk management.

    Method 2: Change the drive letter:

    a. click on Start

    b. Select Control Panel

    c. open Administrative Tools

    d. Select computer management

    d. select disk management in the section at the bottom left. You can change the drive letters on the right.

    See the article:

    How to set, view, change, or remove special permissions for files and folders in Windows XP

    http://support.Microsoft.com/kb/308419

    Please post back with the result.

  • losing audio after adding the second screen

    Why am I losing my sound after having added the second screen (sony sdm-hs95)?

    My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

    • • Windows 8.1 64 Pro
    • • 4th generation Intel® Core™ i7-4800MQ processor
    • • Included 2-year warranty
    • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
    • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
    • • 8GB DDR3 System Memory (2 Dimm)
    • • 2 TB 5400 RPM hard drive
    • • 24GB flash acceleration Cache hard drive
    • • Two batteries of Lithium-Ion 6-cell
    • • Blu - ray player & SuperMulti DVD burner
    • Backlit keyboard •
    • • HP TrueVision Webcam high definition with digital microphone built-in
    • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

    Thank you

    Hello

    How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices

    Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off

    Kind regards.

  • Added the second monitor, but can't put in place - no themes & seemingly in Control Panel

    I added a second monitor, but have no appearances & themes or display icon in the control panel. How can I configure it as a second screen?

    Hello

    I suggest you to visit these links and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    It will be useful.

  • Adding a second hard drive internal

    I use an old HP Media Center PC m700, product: m7041. I have tried adding a second internal hard drive, but unfortunately do not know how to start. Could someone help me please?

    I'll start by guessing that you have a m7041.uk, given that your model number is incomplete. After you have a HP m7041.uk, you have the following types of drive Bay and the quantities;

    5.25 inches (CD/DVD), external x two (one available)
    a (busy) x internal 3.5-inch (hard drive),
    Personal Media Drive (available) x

    Because you don't have that a single Bay 3.5 "for a hard drive and it is already occupied, you will need to use the Bay 5.25" opened with an adapter like THIS or THAT. Please see these tutorials for HP on 'Adding or replacing a hard drive' and 'Adding or replacing a CD or DVD disc' to learn where and how to install the second hard drive.

    Frank

  • New HP and adding a second hard drive

    Just bought a HP Pavilion HPE h8xt, will, adding a second drive, and once that happens, the warranty? The second hard disk will be the data from my old computer and serve storage.

    Hi TIF

    Who should not void the warranty unless you damage the hardware while making it... for not to spill a drink on your PC

    Here is a support document which should help you to install the second disk hard after PC arrives:

    http://support.HP.com/us-en/document/c02862607

    I hope this helps.

  • Adding a second storage array

    We are currently adding a second table to the environment (currently have Equalogic adding Nimble) and the ultimate plan is to slowly decrease the old a. We need to keep both of them in production for some time.  I noticed that I can't add a second card of iSCSI Software, so I think I need to add it to the existing one.  Can someone shed some light on this for me?  Any help is definitely appreciated.  Thank you

    Perry

    As you have already discovered, a card unique software iSCSI is supported on an ESXi host. However, your explanation is correct. Access you several targets of this adapter.

    André

  • Adding a second HDD internal on a Satellite A350-20s

    I have a Satellite A350-20s.
    It is described in literature as having the possibility of adding an internal hard drive 2 "5 second and indeed it is a spot reserved for him...

    The problem is that when I remove the cover to insert the hard drive there is no connector.

    So, how to do?

    Hello

    Some of the units can be updated with a second HDD Satellite A350 and other laptop models. But this means that NOT all laptops offer the opportunity to upgrade
    There are different A350 with different hardware specifications
    All mobile phones support the same substantive coverage but not all motherboard supports a second HARD disk controller and the connectors.

    Your A350 cannot be upgraded with a second HDD due to the different motherboard and the missing HARD drive controller.

  • Presario CQ5110F: COMPAQ Presario CQ5110F adding a second hard drive and...

    Good so I took the lead when writing my original post on how to combine the two computers successfully.
    Not enough research, no question, just a little say aloud... Sorry about that.
    http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-slimline-s3505f-amp-...

    I had little time today messing with both ' puters and discovered...
    They need a good cleaning and had.
    The noise of the Presario is indeed the fan on the radiator, it's just old and tired. Who cannot be strong in a music room; new fan may not be too expensive.
    So I decided the Presario is my starting point.

    I would add the hard drive of the Slimline as slave; they have different connectors tho.

    (1) if I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.
    (2) what parameters of rider (if any) do I need to have on each disc? Do not see outside the car Slimlines.

    I looked closer 2 slots for RAM and noticed that beside them there seems to be 2 places in addition to the Board of Directors, unused with no present holders plastic.

    (3) is it possible to add more slots and double the RAM? I would get 8 + GB and a 64-bit system end by ;~)

    Neither office seems to have the ability to run 2 monitors as is. No problem 29 "should do for now.
    Can't see a way to take the card out of the Slimline wireless and put it in the Presario. Internet not immediately necessary, hard connection cable always an option.

    All the other tips and advice on how to optimize my sytem are also welcome.
    Thank you for your time and helping an old guy handyman.
    See you soon!

    COMPAQ Presario CQ5110F (2008ish)
    Processor AMD Athlon X 2 7550 Dual Core 2.5 GHz = Socket: AM2 +.
    Card mother = Narra5 M2N68 - THE Chipset: NVIDIA GeForce 6150SE nForce 430 Socket: AM2 +.
    Memory RAM = 4 GB RAM DDR2 DIMM PC2-6400 MB/s
    = Video/graphic card nVidia GeForce 6150SE integrated graphics
    Sound/Audio = Audio integrated Realtek ALC888S
    Hard = 320 GB SATA 7200 RPM drive
    CD/DVD Player = DVD +/-R / RW 16 X SuperMulti SATA drive
    OS = Vista Edition Windows Home Premium SP1
    Power = 300w
    Case = Mid size 38cmHx17cmWx43cmL ATX

    Hard drives has no different connectors if they are both SATA specifications like other post indicated.

    There is no adjustment to make on hard disks of the rider SATAS. According to me, that one can think of the old school the IDE drives.

    ) If I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.

    The image below is a diagram for your motherboard. You have enough SATA ports to be used for the second and even a third hard drive.

    DDR2 memory modules can be a little difficult to source. The current generation of add-on memory is the DDR3 specification.

    Perform a Google or any search engine is your preference in the memory of the source by using the update of Compaq presario CQ5110F RAM as keywords.

Maybe you are looking for

  • Z50 - 75 - Windows for Windows 10 invalid product key?

    Hello I replaced the HARD drive that came with my Lenovo Z50 - 75 with a SDS and took the opportunity to also upgrade to Windows 10. I had read in the forum that the Windows key has been incorporated in the BIOS, so I can't needen to worry. I wrote i

  • Live Z10 Z10 WIFI blackBerry to the top of my home wireless router

    I have another strange problem with this phone.  A few weeks ago, our always reliable wireless router stop working.  We restarted it and it worked for a while then quite new.  I don't think about it at the time but just before I was trying to get my

  • BlackBerry smartphones can not click on the links in the browser on curve 8530

    So I've had my phone for about a month now. When I got it, I could very well navigate the Internet. But slowly, over the last few weeks, I suddenly couldn't click on the links on the Web pages. I can type things, as in a Google search, but cannot cli

  • Parallel DML may be downgraded to the DML series?

    Oracle Database Enterprise Edition 11.2.0.3.0When you run a parallel query (e.g. SELECT * FROM parallel_table WHERE a <?), the optimizer may choose a parallel or series, the selectivity of the predicate function plan and availability different access

  • How to install Esxi 5.5 on a card mother-GA-H97N-WIFI

    HelloI have some problems to install Esx on my new configuration.My configuration is:-Processor I5 4590S-GA-H97N-WIFI Motherboard-Crusial Ballistix Sport - DDR3 - 16 GB-GeForce Quadro 600-1 drive sata hardWhenever I tried to install esxi 5.1, 5.5 or