Adding a timer to my film
I do an obstacle course competition and need to have a clock in the upper right corner of the video, is it possible on iMovie 10.1.2?
HI, gmacmain,
It is quite easy to insert a clock in your video.
Download the internet a video clip of a timer and then insert it into your video using the image in the image
iMovie function.
Here is a 10 minute timer that I found.
https://www.YouTube.com/watch?v=pHvP71rwYAc
I downloaded to my counter top, it imported into iMovie as a music video project, placed on top of the timeline above my video, it selected, clicked the button places that overlap in the toolbar at the top of the screen and then select picture in picture. The timer clip was then overlaid on my video, and I could adjust the size and position of the clock in the preview screen. Then click on the button reset and you are ready to go.
See you soon,.
Rich
Tags: iLife
Similar Questions
-
I made a new music video for a song, and the music is not in time with the film, how I put in time?
Oh and I'm using WIndows Movie Maker. One.Please repost in Windows Live Solution Center.
Forum on Windows Live Movie maker:
http://windowslivehelp.com/forums.aspx?ProductID=5 -
Windows provides adding 2 other time zones which I use for time int ' l
Other than that use more than 2?
Or is there a way to do this, I like that I can hover over the time and see the pop up with the other 2 time zones, I have added.
Thanks in advance
You can have only a 1 time zone configured on your computer. That being said, this is the same computer as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/manage-add-ons-not-working-no-add-ons-are-there/b830d22f-0629-48d7-a0fd-10fac3b48d31
-
Desgning a VI that time / interrupts a film according to the input signal
Basically, what I'm trying to do is to design a VI who plays or pauses a movie according to the signal it receives. This VI will be used with an EEG device, and what I want to do is play the movie if the signal exceeds a certain threshold, and it stops if this isn't, in other words a VI that responds to neurofeedback.
As I don't have access to the equipment of the GET yet, I use a sine wave at the moment than the EEG signal in VI of the attachment in this post (which of course will be later replaced by waves of EEG recording), and what I want to do is to read the film if the signal is greater than 0 and put the film on hold if the signal is less than 0. Any help would be appreciated
Kind regards
varkong
I have included the code for the LV8.6 version.
Concerning
Prashant
-
BB Maps Menu item is added several times
Hi, I'm currently adding an ApplicationMenuItem custom to the Maps Application. However, no matter what I do, the menu items run method is never called, the place my application main method is called and the menu item is added once more to the menu card. In other native applications, it worked perfectly, just in the Maps app it seems not working. I also tried the information provided to http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800703/How_To _... but still got the same results. I have another point of entry to my request so that the menu item is added to the start of blackberry. If I remove the other entry point and add the menu item when the user starts the application in the bb menu, it works. I would be grateful any entry on the subject I would like to work with the other entry point. I use Eclipse with the JDE Plugin 1.0.0.67 with component Package 4.2.1 (also tested with 4.5.0). Thanks for your help, Lukas
I found the solution to my problem in this post:
Add the same argument that I use in my menu entry point (to differentiate the delivery of system boot) to the ApplicationDescriptor solved the problem.
Thanks again for your good help.
-
Hi all
It is an addition to print at the same time n rows.
I have the following query, in which each line must be printed time 'amount '.SELECT poh.segment1 po_number, pol.po_line_id po_line_id, pol.line_num line_num, pol.unit_price unit_price, pol.quantity quantity, msi.description description, msi.segment1 item_code, manufacturer_name ||'/' ||mpn.mfg_part_num part_no FROM po_headers_all poh, po_lines_all pol, mtl_system_items msi, mtl_mfg_part_numbers mpn, mtl_manufacturers mm WHERE poh.po_header_id = pol.po_header_id AND pol.item_id = msi.inventory_item_id AND msi.inventory_item_id = mpn.inventory_item_id AND mpn.manufacturer_id = mm.manufacturer_id AND msi.organization_id = 0 AND mpn.organization_id = 0 AND poh.segment1 = 22 Sample Output: PO_NUMBER PO_LINE_ID LINE_NUM UNIT_PRICE QUANTITY DESCRIPTION ITEM_CODE PART_NO 22 124 7 380 3 Repair Kit,Air Compressor 1202.02.2222.0029 Scania MDL.T112/1374083 22 74 3 20 24 Filter,Oil 1202.02.1111.0032 Scania MDL.T112/173171 22 76 5 4232 2 Plate,Clutch Pressure 1202.02.1111.0108 Scania MDL.T112/1102425
Hello
H.O wrote:
...
I am facing the following error:
ORA-01473: cannot have subqueries in the CONNECT BY clauseThat looks like you are using an older version of Oracle. What version do you use?
One way to work around this error is to change:( SELECT LEVEL AS n FROM dual CONNECT BY LEVEL <= ( SELECT MAX (quantity) FROM origianl_results ) )
in my solution to
( SELECT ROWNUM AS n FROM all_objects WHERE ROWNUM <= ( SELECT MAX (quantity) FROM origianl_results ) )
or make the change corresponding to the solution of knapen.
As written, this probably won't work for a certain number of repetitions in the thousands.
Run thisSELECT COUNT (*) FROM all_objects;
to see exactly what.
In Oracle 8, WITH clauses in my solution will have to be re-written views also online.
-
Is it possible to change the viewing of all time in a film of 5 seconds to 3 seconds instead of individually, frame-by-frame?
Is it possible to change the viewing of all time in a film of 5 seconds to 3 seconds instead of individually, frame-by-frame?
================================
Windows XP Movie Maker 2.1The change of setting to: Tools / Options /.
Advanced... tab applies only to the added clips
to the timeline * after * you change the setting.If you switch to view "Storyboard" and select
all of the clips as a batch (select one and the type...
CTRL + A)... you can add the 'Speed Up, Double.
or "Slow down, half" effect of changing the
duration. Simply select all clips / right click
the effect on the menu... Choose...
Add to storyboard table.'Speed Up, Double' cuts the duration of half.
"Slow Down, half ' double life.
These effects can be added up to six times.
If you need finer adjustment...
the info may be useful:To the timeline, you can change the
duration for each clip manually. Move your
pointer on on the edge of an element up to the
you see a double arrow. Now, drag the
double red arrow... you will see a ToolTip that
Watch the evolution of life.Or... just to redo the project after changing
the long-term: Tools / Options / Advanced
tab. -
Airport for Time Machine utility settings / Airport Extreme network
I just added a new Airport Extreme to my former Network Time Capsule, to extend my Wi - Fi. I have read many posts and checked different websites, but I'm just getting more and more confused.
My internet DSL cable is connected to the Airport Extreme and then 2 ethernet cables both time Capsule and my Imac G5. What would my network settings in Airport utility to the Airport Extreme and time for a better return Capsule?
How can I find out if the two grow Wi - Fi?
I just added a new Airport Extreme to my network of Time Capsule prior to extend my Wi - Fi
I think we got it... and we understand. This tells us that you have added an AirPort Extreme to the core network to ensure the widest coverage Time Capsule wireless.
My internet DSL cable is connected to the Airport Extreme and then 2 ethernet cables both time Capsule and my Imac G5.
No, unfortunately, we do not have it. This tells us that your AirPort Extreme is the main router and that you have added a time Capsule to provide wider coverage wireless for the AirPort Extreme network.
Sorry, but we are confused. Which of your statements above is correct?
AirPort Extreme extends to the Time Capsule network, or have you changed your network so that the Capsule extends the AirPort Extreme network?
Could you please provide the serial number and the model of your DSL modem?
What operating system you use on your Mac or PC? If you have a Mac and you are not sure what operating system you have, click on the Apple icon in the upper left corner of the screen, then click on about this Mac. Please post returns with the OS X Version you see here.
-
Measure the time of the rising edges of a digital stream using a USB-6341
I have a DAQ USB-6341 map.
I use Measurement Studio (writing code in c#) on a Windows 7 computer.
I'm relatively new to the DAQ cards, programming, so I could ask something that is obvious (sorry if this is the case).
I went out a stream of digital pulses to an analog output channel. I wired this channel to one input of the meter channel. I am able to measure the number of edges upward to the inlet of the meter channel (since the digial flow is continuous, the number of rising edges increases with time).
I would like a time stamp of each rising transition and I like to keep these timestamps in a table without ever growing (or maybe bin these timestamps in a histogram).
Set up the meter channel to provide the timestamp data? (rather than just count)
Thank you for your help.
WRB,
The meter must be able to measure the relative time between the different edges of your signal. To do this, you will take care to set the meter to measure time. It will measure how long a full period of your signal takes. You can configure edge that you want to start with. You'll want to set up your timed 'implied' measure. This sets up the meter to automatically take action whenever a period is over. While it's not exactly a timestamp, you can find the distance between two edges by adding the time periods between the banks in question.
I see another technique that you can use. This would put the counter to edges of County one of the basics of time of your device (it has 100 KHz, 20 MHz and 100 MHz bases long). Then configure the task to use your signal as a sample (configuration to use rising edge) clock. Whenever the song occurs, you will get the number of ticks ticks selected timebase that took place at that time. One thing to note here, however, is that the counters are 32-bit wide, so your code will have to manage the overthrow of this charge if you are using a fast time and base running for long periods of time.
Hope that helps,
Dan
-
time based trigger sample applications?
Hello, I spent the last 2 days trying to find a relax time based, and I still don't understand.
Please, someone the code examples on this? The documentation is really hard to follow especially without code examples.
Thank you.
I use an app without a head for the handling of push messages and after the 10.3.1 update, I added a timer trigger. In the bar - descriptor.xml, I added another filter in the tag to invoke the application without a head target:
application.headless myHeadlessService myHeadlessService bb.action.PUSH application/vnd.push bb.action.system.TIMER_FIRED * The app without head must manage timer invoke:
handleInvoke(const bb::system::InvokeRequest & request) { if (request.action().compare("bb.action.system.TIMER_FIRED") == 0){ qDebug() << "myHeadlessService: timer trigger!"; } }
When the GUI application starts, it creates a timer to invoke request that triggers the application without head every 15 minutes:
void ApplicationUI::headlessInvokeTimerRequest() { qDebug() << "headlessInvokeTimerRequest()"; InvokeRecurrenceRule recurrenceRule(bb::system::InvokeRecurrenceRuleFrequency::Minutely); recurrenceRule.setInterval(15); InvokeTimerRequest request; request.set(INVOKE_TIMER_ID, recurrenceRule, "myHeadless.invoke.push"); m_invokeReply = m_invokeManager->registerTimer(request); // Connect to the reply finished signal. bool res = QObject::connect(m_invokeReply, SIGNAL(finished()), this, SLOT(onInvokeTimerResult())); // This is only available in Debug builds Q_ASSERT(res); // Since the variable is not used in the app, this is added to avoid a // compiler warning Q_UNUSED(res); }
When the timer is no longer needed, stop:
m_invokeReply = m_invokeManager->deregisterTimer(INVOKE_TIMER_ID);
I hope this helps you.
-
Listener is the addition of several times
Hello
My app account number of messages send by user for this I wrote to count the messages app. I did it using sms listener concept, but the problem is listener sms adding several times. Whenever I start the app it adds a listener most. Anyone has idea how to add sms listener only once?
Please help me on this
RuntimeStore runtimeStore = RuntimeStore.getRuntimeStore(); if( runtimeStore.get(MYKEY) == null ) { MyListener myListener = new MyListener(); runtimeStore.put(myListener,MYKEY); } else { MyListener myListener = (MyListener)runtimeStore.get(MYKEY); }
-
I have an application that I want to add to the Contacts Menu using MENUITEM_ADDRESSBOOK_LIST. In the Simulator, I run the application and it adds to the menu (using the example code for the function t.test with). Whenever I run it, it adds another instance of the menu item. Now the questions:
(1) the user should click on this app to add it to the menu?
(2) what happens when the device is restarted? They will have to run the application again to add it to the menu yet?
(3) how can I determine that menuitem has already been added and not keep adding every time that the application runs?
Thanks for the help
You must configure your application as an application 'auto start' (see the project properties in the JDE).
You have two entry points - the "automatic" Startup entry point and the GUI entry point.
You will add your menu item in the "automatic" startup code
See this link:
There is also an example of this in the developer's guide.
-
False track audio times with Windows Media Player.
I use Audacity to record LP's and then burn it to a CD with Windows Media Player. When the pieces are added to the Windows Media Player burn list, channel 1 and 3 always show the track record time for 9 & 8 minutes adding unused time at the time of the correct record. I can only get 60 minutes or less on a 80 minute CD.
Hello
Run the troubleshooters and see if it helps.
Open the troubleshooting Windows Media Player settings Troubleshooter
Open the troubleshooter in the Windows Media Player library
Hope this information helps.
-
Timer for "test movie".
Hello. I did a search for this problem but I have a lot of visitors on how to use the flash to a stopwatch. This is not what I want.
I want to know if there is a way to put a clock on the screen "test movie" after having supported on "ctrl + enter". Usually, for a scene the timeline will tell how many seconds it is, but with several scenes, it would be nice to have a clock there on the screen, rather than scrolling through each scene by adding the time. Is there anything available like this, perhaps via an actionscript?
Thank you.
If you want to display in a textfield, you use this code.
but for your organization, you can use:
trace ((this.totalFrames-this.currentFrame) / stage.frameRate + "seconds remaining");
-
I added a time series measured in SPR
Year ago sales = there is ("Business Analytics" "." ") Sales facts ".» "The sale $", "Business Analytics". «Time hierarchy ".» ("" Exercise ", 1).
If I shoot "Sales there of the year" in the answers, it takes forever to run - (5 - 6 minutes) - the result is correct.
If I simply pull - "Business Analytics". "Facts sale '." "" Selling the $'s ' running in 5 seconds.
Is their anyway I can optimize the timeseries functions?
Any response would be greatly appreciated!
We are the Oracle Business Intelligence 11.1.1.6.5 version.
Published by: ann 2012 March 14, 2013 14:13That's why I often make an alias of the fact table and join the in the time dimension with year - 1. For me the SQL out readable and performs generally better than the version that comes with AGO.
Scott
Maybe you are looking for
-
Skype (process com.raider) unscheduled stop app
Hi im Solomon Islands manny my mobile is samsung galaxy GT-S5360 young I just finished creating my account and connect to my Skype account. When I start to add my contact number and the beginning of ongoing process com.raider I'm wrong you touch the
-
Scanner only works on some computers
I recently bought a Canon LiDE 220 scanner which is supported by El Capitan according to apple of supported scanners page, but whenever I try to scan on my computer it says "Scanner reported an error. Cannot communicate with scanner ". I installed th
-
If I replace the z3 screen Xperia will change my IMEI number?
-
LaserJet 6 L shows ready but will not print from computer
My LaserJet 6 L works fine, but just today he's leaving the impression. Green ready light is lit, but sign says 'paper.' There is paper in and it will print the test page for each slot. Cannot print spreadsheet, word processing, or WordPad, PC run
-
Is it possible to perform image processing (sepia, vignetting) until the photo is actually taken. For example: Instagram Live Imaging. Thank you