Adding another plot by programming

Similar Questions

• I added by mistake bad programs to open a JAR file.

  Original title: open with

  I added by mistake bad programs to open a JAR file.  I can't find a way to remove these programs from the "open with" popup.  Help.  Thank you.

  You do not remove this popup programs, you just make another choice instead.  This popup indicates the selected choice more recently that you did.

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• Cannot delete folder: it has been used by another person or program

  Can you help me please.

  How can I delete my folder when its says "' cannot delete the _: it has been used by another person or program" "

  the problem is... it has been unused by another person. What should I do?

  If the news of PML this does not clear the indelible
  problem files... the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Unlocker
  http://www.filehippo.com/download_unlocker/

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• I'm unable to download the updates for Adobe reader 10.1.1. Win 7 claims that I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Here's how you can find your status:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:

  NET user "user %%nom.
  What do you see under "a Local group memberships?

• Lightroom 6 develop Mode.  Screen loupe and compare view after screen show blue background with two diagonal lines of tbrl top low right another top right at the intersection of criss left in the Center.  If I move to another photo, the program stops

  Lightroom 6 develop Mode.  Screen loupe and compare view after show blue background wallpaper with two diagonal lines left and top right side of the other top right at the crossroads criss left in the Center.  If I move to another photo, the program no longer works and ends by asking me to close the program. Help?

  Go to your Lightroom preferences, performance tab, uncheck the option of the graphics processor.

• I am trying to install an antivirus program. The program will not install because it establishes that there is another present anitvirus program. Why the new software does think that the other program is still there?

  The antivirus program that program anitvirus I try to install claims is still on my computer came with the computer when it was bought a little more than a year before.  This antivirus program was followed by another antivirus program.  The antivirus program on the computer at the time wherever he bought has been removed until the following antivirus program has been added.  The second antivirus on the computer program has been removed before my attempt to install the third-party antivirus program which States that the original anti-virus software came with the computer is always on it.  The antivirus program that is allegedly still on the computer is not on the list of installed program computer.  None of the two antivirus programs that were on the computer is on the list of installed programs computer.  How can I remove a program that is no longer on the computer?  Why the antivirus program that I try to install again could think that a program is still present on the computer where this program has been deleted if long ago?

  Give this program a go. It is effective to clean up the damage.

  http://www.revouninstaller.com/

  I hope this helps.

• How to choose IMAP or POP, when adding another email account

  Recently, I wanted to add another (IMAP) e-mail account in the mail. I opened the mail, choose Add account in Messaging menu and then a different e-mail account. In earlier versions of the mail, you can choose the type of account in the first step, but in version 9.3 (3124) you are prompted to type only the username, your email address and your password. If you then click Next, mail adds an account without having to ask for the account type. In my case the added mail always one account pop. I couldn't change the account type in the account properties. The field for the incoming mail server shows gray the pop mail server. The only way to add an IMAP account type in incorrect parameters in the first step. Then, a window opens where I could type in the incoming and outgoing mail server settings. Same behavior on my iPhone with iOS 9.3.2 5s (13F69).

  Best regards Lutz

  Well at some point you can hold down the option key after completing the first screen and then press the continue Option, but it seems that no longer works.

  So now, when you add a new account, put in incorrect information in the user name or password, or both. Which will cause a failure and make up the most advanced screen, where you can choose the type of account that you are interested in.

• using a VI to open another stand alone program

  Hey guys,.

  I would like for my program to be started by the user and some bring to pour some selections that would then open up a new program stand alone. Where each individual program would actually the bulk of the program as a whole and perhaps utalize its own probably producer consumer model. Once the secondary program ends, I would like it to return to the original program for the user to make new selections and open an another prgram.

  to me, this feels do able as having essentially a main loop that calls functions only.

  If someone could just link me an article or something that would be great. I was looking around and found something on this call chain VI, is part of what I need?

  also, I'm always open to suggestions if this seems to be difficult to follow way or a wrong way to do it.

  Thank you guys

  You can do this visually adjusting the Visual parameters on your VI.

  I usually use a custom configuration and call before Panel.Window.State property on your VI, it should look like this:

  Do the reverse on your slot - VI and you will get a break. You will also need to make some changes to the section of the appearance of the properties of the VI window.

  This will give you a visual appearance and the type of break you're looking for.  Also, you probably want to use a structure of the event as your main loop function.

  Kind regards

  Tim

• You can run this program while using another anti-virus program

   
   
  You can run this program while using another antivirus program?
  I know that it is a matter of end now that MS does not have anyone else.
  However, I was going to dnld MS antivirus with Norton market too.
  I couldn't find info on one might or might not run another
  antivirus program during execution of the Member States. (as a general rule, you can't)

  Still, it would be interesting to know about this issue. And... Should be
  have been on one of the pages, so "requirements" or FAQ
  for example.
  Thank you in advance, Ric.

  Hello Ric Buckmiller,

  Thank you for using the Microsoft Windows Vista Forums.

  What specific Windows Vista virus protection software are you talking about?  Windows Vista will be usually comes with Windows Defender.  Windows Defender is software that helps protect your computer against the pop-ups, slow performance and threats caused by the software security spyware and other unwanted software to detect and remove spyware on your computer. Windows Defender Protection features in real time, a monitoring system that recommends actions against spyware when it's detected, minimizes interruptions, and helps you to remain productive.  Yes you can use it with antivirus software.

  Currently, Microsoft has an antivirus software on beta.  http://www.Microsoft.com/security_essentials/support.aspx
  If you have this downloaded, it advised that you can always use another software antivirus at this time.

  Or you are referring to Windows LiveOneCare?  Please let us know status.  Thank you!

  How to uninstall any other antivirus or firewall program?

  Before installing Windows Live OneCare, please make sure that you uninstall completely any existing antivirus or firewall program that may be on your computer.

  This step is very important, no matter what protection software you use, because installing one antivirus or firewall program over another on the same computer could potentially lock up the computer.

  Note: If you do want to keep the ability to reinstall your old antivirus or a firewall program in the future, make sure you have the original product CD (or a backup program disk) before you begin uninstalling.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• PERC H330 and Raid 5, try adding another SATA drive raid 5 array

  Hi all

  I have one server PowerEdge T330 with 8 slots of disc and have currently 3 SATA drives running a raid 5 configuration.  I have a virtual disk configured for Raid (must).

  The operating system recognizes the disk and is able to use the resources...

  My desire is to add another hard drive to the table (hard disks of the same size, same brand, etc.) with 4 disks without losing any data.

  I looked in the settings of the iDrac and the only adjustment was to add the new disk as a global hot spare or a hot spare dedicated to the virtual drive.

  I also looked in the BIOS and do not see a way to add the new drive.

  Does anyone know how to increase capacity?  I can blow the virtual drive if necessary and start over without problem.  I intend to gradually accomplish this Act until adding 8 disks. (5 times).

  Help!

  Hello.

  Management controllers RAID and tables is not made in the BIOS iDRAC or systems. For the management of the RAID (virtual disks) arrays, you have OpenManage Server Administrator (OMSA). If not installed, see the link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=TK61C once installed, go to-> Storage->-> H330 PERC controllers-> virtual disk--> sub tasks available-> select reconfigure and run-> then check a box to add the fourth disk on the next page. Follow the prompts and allows you to extend your range of RAID 5.

• Executed with another disk defragmenter program

  Hi-I have the same problems as others with this error message. But I think I know what caused it; I have upgraded to Windows 10, then when he lost all of my pictures and documents (Yes, MS remote trying to find them and could) I restored it all back to Windows 7. Fortunately, I had saved my files about 6 months, so I got most of my photos, etc. But now, I get this message "Disk Defragmenter runs with another program" and change the settings. Tried it, didn't work, so a post office tells to open Task Scheduler, so I did it, but an error pops up preventing me to go anywhere else,: the task image is damaged or has been tampered with. So, what should I do now? Thank you

  Data are the only thing that makes sense for the backup.  Programs (applications) must be re-installed in the newly rebuilt system.  Data: spreadsheets, documents, photos, videos, music - your stuff.

• Adding another script worm IPCC Enterprise 4.6

  I broke the script live today so I ask before I try again.

  I have a script called CC_Main_V5. When I use Explorer to scripts, I can see the different versions of the script and say which one is the active version. I want to make a copy of the current version to begin programming of a newer version of it.

  I tried this way 1 and broke it - I opened the version active, makes a change in the script, chose save as and used the same name script (CC_Main_V5) but not checked the box that States make the active script on save. I thought that this would add another version in the script editor I could modify and play with.

  What's happened is that the active script became CC_Main_V4. It is a totally different script name, don't know why it turned on instead of a different version of the CC_Main_V5 script.

  So my question: how to make a copy of the script CC_Main_V5 which will apper in the Script Explorer when I develop the CC_Main_V5. I want to be able to switch between life and my test.

  Thank you

  When you're in the script editor and you go to edit a script, it automatically increases the 'version' one meter.

  (as indicated on the bar at the top of the page windows check this just open a script in the 'Browse' mode. then click on the "Edit" button to put the script in Ed. mode version should have a better by one of what appeared to be the version in browse mode.)

  You should see something like the following in the top bar of the window:

  IE: Script Editor [CC_Script {all customers}.013 [live Version] [Browse]]

  (this script is called CC_Script and is the version.013 and is in navigation mode)

  When you switch to edit mode, you should see something like the following:

  Script editor [CC_Script {all customers}.014 [live Version] [edit]]

  (this script is still named CC_Script and is now the version.014 and is in edit mode)

  (automatically augmented version and you need to do to keep this version is to press save button; or leave it prompts you for a backup if you were to press the browse buttons or monitor)

  When you save the script, do not use the function "save under" but comes regularly record.

  You can use ' options > Preferences on the menu drop-down menus to set the option 'automatically make a script active when recording' off. This will allow you to save the script with registration works but do not do it activates.

  enabled or not, this version of the script has now shown that the first script in the script Explorer list.

  Please visit this link on the Administration's Script more ICM 4.6:

  http://www.Cisco.com/en/us/products/SW/custcosw/ps1001/products_user_guide_chapter09186a00800f061f.html

• I can only view my computer and the help of correctly another control panel program is not working.

  Hi Sir, I just deleted a mp3 from my computer dell laptop which has changed all my programs in the video icon like opera, Google chrome, etc.. When I open the it opened WMP and shows the error as extension .lnk.

  Hi khaled Rahul,

  Method 1
  I suggest you try the steps from the following link:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.