Adding effect to multiple pictures - Director

I would like to know if its possible to add an 'effect' to multiple pictures at the same time? And do not go to each image and select an effect for this specific image. I have about 900 pictures and I don't want to repeat myself 900 times...

Thank you John, so it seems to work. I don't have 900 pictures in a movie, its broken up in about 7 films. So not too well.

Now, select it all works and I can add the effect of these images. That will probably be a cause of stupid question, I don't think that this is possible. I was wondering if there is a way to select every second photo and adding 1 effect then select others, and then add another effect it. It's just, I don't want it to be boring with a single effect. But if I can only select all, then its cool too!

Thank you!

=============================
Try to select multiple by holding your CTRL
Everything on the left by clicking on the videos of your choice.

FWIW... you'll like PhotoStory 3...
It automatically apply random movement at all
pictures in the slide show. (but a)
more than 300 photos)

(Yes, it will run on Vista)

John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

Tags: Windows

Similar Questions

  • How can I request a preset to multiple pictures at the same time?

    I'm almost embarrassed to ask this, because it seems so simple. But I am new to LR and need help.

    I want to apply a preset (exmample, a preset that resembles the film) to multiple pictures at the same time. (similar to edit in Photoshop batch) but I want to want the balance of whites etc is necessarily the same thing, of course. Help, please!

    Make that 99jon wrote, then select all the thumbnails of the images you want to apply a preset. (ctrl + click is sometimes a bit boring to select different in the grid images when browsing a large number of them. consider using the spray can and apply a label of color to the images you want brand. and then filter for color you "pulverized").

    After selection there is no need to switch to the module development for appl a saved preset. In the library module go to quickly develop Panel and select the preset from the "Preset" drop saved.

    Make sure that the preset affect only the properties you want to change. If the white balance must remain intact, then check the box for the white power off balance when you save a preset.

    Oli

  • Why the size of the picture changed when adding effects trans ect

    Hello

    I have a project with a few clips

    project settings 1024 x 768 15 fps

    and images is 1024 x 768 15 fps

    now what happened after changing the clips when I add the change of speed, transitions, or effects

    the used clip changes size in the monitor and loses quality,

    OK this happens ONLY AFTER that I have support on enter to return, until I made that they play very well on the timeline.

    Add to this that I have a work around, which is to place a keyframe of the movement at the beginning of the clip,

    and when I export the project as avi full image is fine.

    While a problem during the time line, but I just sometimes makes it difficult when you add more effects ect

    Any idears

    see you soon

    You can change the codec of rendering for custom sequences.  It's in the sequence settings.

  • Paste the settings to multiple pictures in Flimstrip

    HI - this is probably a basic question, but I may have missed the 'how.'

    When I'm done setting (in the develop Module) and I click on 'copy', and select the items I want to copy, and then I want to do, is apply (paste) these settings in a number of images.

    What I do is do I highlight ("Ctrl + click") several images on the film.  Once these images are the highlight (images of the film highlighted), I then click "Paste" - but the only picture that is changed (applied settings) is the first image of the film.

    How can I select the images on the film I want to address (apply the copied settings) and have the settings applied to all the selected images?

    I'm sure it's obvious and there must be a way to apply this 'recipe' for all images selected without having to create a collection or one-at-a-time.

    It is proably the same problem, but when I want to turn several images (in the library module), if I select in the flimstrip, only the first frame turns when I click on the arrow direction or counter-clock-wise.  Same question?  Is this possible in the film strip?

    Thank you

    Thank you - you would think by selecting multiple images on the film, you could then paste the settings to those selected.  Guess I had better read on Sync.

    Yes, it took me a while to understand that would not work.

    And what does Auto Sync?   A lot to learn.

    I'm fairly knew LR, too, but I think that this will automatically apply changes to multiple images in real time. So if, for example, you trigger the black slider in 5, he was relieved of 5 in all the pictures you have sync would be.

    So, it is not really a grid in the develop Module - you must spend to develop the library, right?

    Right

    I got a lot of use out of 3 Kelby Lightroom for digital photographers book. There are a lot of hidden things in LR you'll ever figure out on your own.

  • Adding keywords to multiple images

    In the library by selecting multiple images and then adding keywords only adds that keyword in the first image.  What I really need to synchronize these images to get the keyword through all the images?

    Or rather missing me something obvious - someone at - it ideas?

    Matthew

    You must select multiple images in the grid and not in the film for it to work.

  • Apply changes to multiple pictures at once

    I'm not sure when this happened, but I just got back from vacation and I tried to apply a preset to a group of photos. It applied only to the first picture. I know that I was able to do this in the past so I was wondering if it has changed in an update or in the preferences. I had version 2.6 and it did not work and I've just updated to version 2.7 and it still does not. Does anyone have any insite? I don't want you must manually add the same settings to 800 photos! Thanks in advance.

    Suggestion of Beat it's even better!  (This is because he knows even better LR that I do).

    It's the help doc (search help for 'sync'):

    Synchronize settings with multiple photos

    If you work in the development or the library module, you can use the Synchronize command to apply some development parameters of the current photo to other photos selected in the Filmstrip. (The current photo is indicated by a white border more light in the miniature of the film).

    Note: When only one photo is selected in the film, the sync settings command is not available. In the develop module, the sync button becomes the back button; in the library module, the sync settings button is inactive.

    Shift-click to select the other pictures on the Filmstrip to synchronize with the current photo and then do one of the following:

    • In the develop module, click the sync button, or choose settings > sync settings. Select the settings to copy, and then click on synchronize.
    • In the module development, Ctrl + click (Windows) or Cmde (Mac OS) the sync button to change it to the Auto Sync button. Then, drag the sliders or make adjustments to the current photo, and the same adjustments are automatically made to the other selected photos. Click the Auto Sync button to exit Auto Sync.
    • In the library module, click the sync settings button, or choose Photo > develop settings > sync settings. Select the settings to copy, and then click on synchronize.
      All the settings that you may have previously selected or deselected in the copy settings dialog box are also defined by default in the dialog box sync settings.

    If you don't want to apply the changes to all images, then select only some of them.  If you want to only check the settings you want to update in the Synchronization dialog box only apply some settings to multiple images.

    John

  • Save multiple pictures with a dialogue box

    Hello

    I try to add a feature to a program of mine to record multiple images with a single click, but I get these ridiculous errors saying "file not found" to "Open/create/replace the file" function, which is set to create. Of course, the file is not found, I'm trying to create it!

    Can someone look at my code and tell me what is the problem? Thank you!

    Hey manufacturer.

    I took a glance at your VI and it seems to me that the problem is in the Express VI to file dialog box, you choose a location to save the files, but this situation is never created. So if I want to save my images in TestFolder, it seems that your intended functionality is for images to be stored in a subfolder called 'Images' (or whatever the user enters a name in the file dialog box) so that the final result are images being recorded TestFolder/Images.

    If this is the case, you can simply add a node function to create a folder in your block diagram (look in the programming > e/s from file > Adv IO file for this). You can wire directly from the output of selected path in the dialog box file to the path of the node Create Folder entry. I recommend you to place this node in line with your existing code in order to ensure that the creation of files ends before you try to save files in this location.

    If, instead, you want the user to select an existing folder and save images directly into that, simply have the click of the user the "Current folder" button in the dialog box of the file, rather than enter a new name and click Save.

    I hope that helps and let us know if you have any other questions.

  • I get "staircase effects" in the picture when you write a DVD of a source project high-definition.

    I created a video project of 31 minutes, using HDV video and high resolution still images.  The project is written on disk Blu - ray is perfect.  When I write the same project to DVD, the image shows a "staircase effects".  In the old days this could be remedied, in some cases, changing the order of the fields.  This option is grayed out on this project.  How could I get a better DVD product?

    fburton22

    Thanks for the follow-up.

    Please explore...

    1. because you have a 1080i30 project for your 1080 60i source (aka 1080i30)

    2 export this scenario in an AVCHD.mp4 file, saved on the hard drive of the computer. To do this, please use

    Publish + share

    Computer

    AVCHD

    with Presets = MP4 H.264 1920 x 1080 p 30

    3. open a new project and set the predefined project manually to

    NTSC

    DIGITAL SLR

    1080 p

    DSLR 1080 p 30

    Then import your file AVCHD.mp4 (1080 p 30).

    To manually set the predefined project, please follow the instructions below

    • Open the project in the workspace Expert and go to file menu/new project and change the settings.
    • In the settings, set the project preset to the above setting. OK to get out of there.
    • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
    • In the Expert workspace, import your media source using add media/files and folders/projects active.

    4 then, when ready,.

    Publish + share

    Disc

    DVD disc

    with preset = NTSC_Widescreen_Dolby DVD.

    East Gate in the large display of DVD VIDEO to DVD disc reading?

    If this isn't the case, could you post a screenshot of the jaggies?

    RTA

  • How to get you to multiple pictures at once in Flash?

    I want to draw something to about 10 images, but I don't want to have to draw on all of them or to copy and paste because it forces to not be aligned with the drawing in the previous image. I watched it, but I can't seem to find someone the same question. I tried to use editing multiple frames tool, but it does not work for the things (perhaps a user error), but works for staggering things as it is supposed to be drawing. Does anyone know how to draw multiple images at the same time if this is possible?

    You can copy the contents of a layer and paste in place another layer but you will have to do so at each new keyframe. The dough persist across keyframes.

  • Images of some, but not all, corrupt after adding effects

    Hi all

    I have a 25-minute film, and when I add effect that some clips are corrupt - a few flicker with one sort of blue tint, others have another clip to come through it in some frames.  It's the same 5 staples that are corrupt everytime but I didn't something different to these clips compared to any other person as far as I can make out.   If I remove all the effects that I put on it the problem goes away, but when I reapply the effects the problem reappears.  I have Colorista and Mojo applied on all plans.  1 clips is played in revese and there are a few slight color changes.

    When you open images in encode I get the problem "could not load kPFColorParamSuite."

    I use windows 8 and Premiere Pro (fully updated) cc.

    Any ideas guys?

    Thanks in avdance

    Tony

    I discovered that the Red Gaint Denoiser II was the cause of the problem.  I removed all the effects, the base form clips and worked them well!

  • copy and paste effects to multiple clips at once?

    I thought we could do a copy/paste effects and parameters of the effects of

    several clips selected at once, but I do not seem to make that choice.

    Thank you everyone.

    Steve Z

    For this select the clips, right-click and choose Paste attributes.

  • Is it possible to link together effects to multiple clips?

    I have a clip that I have edited first and put in AE CS5, I have several clips that are simultaneously, but in different places in the timeline, so the effects, like Colorista and looks, I would like to apply to all clips at the same time... is possible to link all of these effects, so I only have to update all others will change? * I know I pickwhip to each property, but it is tedious and just curious to know if there is a faster way... Perhaps a phrase, or something would help!

    Thank you all!

    It looks that you would benefit from the application of these effects to clips in a separate model and simply reuse this model in your main computer. This way you will also noticed faster and rendering as AE has to make them

    once and can then be cached results.

    If for any reason any can't you need to precompose, there is always the old but great script "CreateLinkedEffects", but beware that some properties of some plugins may be related (custom controls for most "Opacity on Time" in effects like Trapcode particular.)

    http://aenhancers.com/viewtopic.php?t=32

  • 'Effect' on multiple selection?

    Hello

    I would like to ask a question about the transformation.

    For unique objects, transformation of displacement could be used.

    However, for many objects, for example, a box and a text, which seems impossible as long as the 'effect' button is grayed.

    freehand_transform.png

    Then is - how the software has been designed? Processing operations are intended only for simple drawing objects, not for several objects at the same time? It seems logical, because when you try to apply an action to several objects, the action must be applicable to each of them. In the present example, where a box and text are chosen together, it might be possible to somehow "distort" (a hypothetical operation) the box, but it could be that the "distort" does not work on fonts. From a programming point of view, it could be that a box is an instance of the class, box and a text is an instance of a class of text and the hypothetical "distort" the method is implemented for the class and the text , but there is no definition for a box and a simultaneous text selection, as no such definition for other combinations because combinations of types of objects are essentially many.

    Is this right?

    Bob

    If you want two or more objects have the same effect, group together them. Apply the effect to the Group

    Alternatively you can, via a style, apply the same effect to each object. Will allow you to edit the effects independently or to redefine the style to modify all objects with this style.

    Freehand effects was introduced primarily as a way to speed up the creation of web design. They are not ideally designed for applications step - and repeat or technical. For example, the effect to develop can be applied only in units of whole pixels and not in millimetres or fractions.

    There were no further development of Freehand in the past that many years and I personally don't expect any in the future.

    Judy Arndt

  • Adding effects to a clip

    When you add effects to a clip, the clip is running slovley

    who is wrong

    Workstation HP 18 GB of ram, win7, raid0

    When you add an effect, a red line appears above the Clip on the Timeline. Which indicates that a smoother reading, to make the Clip by pressing ENTER.

    What effects did you add?

    Good luck

    Hunt

  • Effect of multiplication on top a gradient effect is not completely transparant

    Place two images on top of eachother [STEP 1]. Select the image below and use object > Effects > gradient so its bottom faints at White (paper) [STEP 2]. Set the image on top of multiply [STEP 3].

    Expect that the white background is transparent, but it is not. There is always a ghost glow how is it?screenshot_03.jpg

    I wouldn't trust really view of InDesign that.

    Export to PDF and examine closely with Acrobat. Use the separations preview to inspect each layer of color on its own, which must each have little color difference like sore thumb stick.

Maybe you are looking for

  • Is it possible to disable addons on specific pages?

    I have a few Add-ons that can access my page content (abp to mention one).But I don't want them be enabled on specific pages, such as my Bank. Is it possible on the black list of sites? Either by the module as a whole.If this isn't the case, it would

  • Monitors with speakers?

    One of the HP monitors have loudspeakers built-in and audio output ports that can connect to external speakers?

  • 66A error code appears afterdown loading updates__

    I get an error 66 a code after loading of updates

  • T430 keyboard

    Hello It is possible to change the no keyboard backlight the backlight one?And the backlight will work?

  • I forgot the password on Netbook

    I have a netbook and I can't use a disc to reinstall windows xp, I don't remember my password to connect and there no other user account. How can I do to recover my password or reset anything on the system at boot F8 or? I am the only user on the net