Adding smart card reader driver

Similar Questions

• Smart card reader driver is sought on Windows update after inserting the smart card

  We are in the process of deploying PKI project in our environment. Client computers have Windows 7 Enterprise 64-bit SP1. We use McAfee Endpoint Encryption 5.2.12 on all clients. Our environment has a mix of Dell (Latitude E6400, E4300, E4310, E6410, E6420) and HP (EliteBook 8460p, EliteBook 2560p) laptops. There's no problem with Dell laptops at all.

  With HP machines, however there are two problems.

  1. with the model 8460p, after installing the Alcor card reader driver, when I insert the smart card into the reader he begins to search for the drivers on windows update. In three minutes, it updates the drivers and works very well. My concern is when I install the card reader drivers explicitly why go to Windows update. HP 2560p also has the same card reader, but this problem is not on this model. I disabled the driver smart card research in strategy group as well. This behaviour is sparkle roll.

  2. when I enable smart card authentication on the McAfee console for any HP laptop and try to use my smart card on McAfee Endpoint encryption pre boot screen, machine freezes. Same configuration of McAfee encryption works fine on Dell laptops.

  Help, please.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on Microsoft TechNet. Please post your question in the TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Hope the above information is helpful.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Problems of blackBerry Smartphones initialization of a 330 of SafeNet via the BlackBerry Smart Card Reader

  Hello

  I managed to use my PC BlackBerry smart card reader. Now, I am trying to initialize a smart card SafeNet 330 with SafeNet BSEC from the PC tool. But everything I do the initialization fails.

  Has anyone been initialized properly a card in this way by the BlackBerry smart card reader?

  I suspect a problem with the drive, why I'll try to find my Gemplus400 player and see if it works.

  Thank you

  Chris

  Using the player of Gemplus400 did the trick. Looks like the BlackBerry SCR reader stumbles on the configuration of the password during initialization of the as it does not define the label successfully.

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• Card reader driver for hp 2000-2120TU

  Card reader driver for hp(2000-2120tu) for windows 8

  Hello:

  Here is the link for the card reader driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104710-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5293868 & sw_lang=.

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Satellite M70: Need mass storage controller & card reader driver

  First issue: I want to (mass storage controller) driver.
  Second question: I have the card reader, but it does not work.

  First issue: what you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com

  Second question: I assume that the material is not installed correctly. For this you must install TI 5 in 1 card reader driver.

  If you cannot configure all this use please livery recovery DVD and install OS. After that it all works again.

• HP - Pavilion 15-268sc card reader driver

  Hello

  I own hp-Pavilion 15-268sc, runnig on Windows 7 - ultimate x 64.

  I have a problem with my card reader, this model is sold without a driver, I had to download all.

  But for the card reader, I can't find anything.

  So I used serching by Hw Id, which is

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2166103C & REV_01

  found a first also for HP P15 family and connected.

  But the result is unsatisfactory, card reading is quite slow, and sometimes, when I try to open the memory card, I get a message error that application not found.

  I hope so, I'm looking just wrong, and someone who is very kind, just after the good link here

  Thanks for advantage.

  Please uninstall the currently installed driver and try provided HP Realtek Card Reader Driver or Realtek Card reader driver for XP, Vista, Win7, Win8, Win8.1 (download location to choose for the first item in the list).

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• JMICRON card reader driver

  I have three "base system device" in Device Manager that aren't jmb38 (x) card reader host controller for:

  SD/mmc

  MS

  & xD.

  Where can I find driver for these downloads?

  Pavilion dv4-1431us

  Hello

  The card reader driver Installer is on the corresponding link below.

  Windows 7

  Windows Vista

  Kind regards

  DP - K

• 8460p: keep the smart card reader attached, even if the card is removed

  HP EliteBook 8460p

  Win 7 Pro 64-bit

  When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?

  According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:

  '- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »

  But this isn't the case to find.

  Any suggestions?

  Concerning

  F27 BIOS and the new card reader is needed to solve this problem.

  old player = v1.20

  new player = v1.21

  /paasen

• HP Pavilion 17-g026ur (N6C55E: card reader driver)

  Nice day!

  Can not find the driver for my card reader. Device ID is PCI\VEN_10EC & DEV_522A & SUBSYS_8097103C & REV_01

  Please, help me and provided with driver.

  Hello

  Try the Realtek card reader driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73277.exe

  Kind regards

  DP - K

• Card reader driver LexMA

  When you plug a Lexma 63-in-1 card reader my pc (Windows XP OS) replies: USB key not recognized. Same thing happened before with Activa card reader, so I replaced it with the Lexma. Original Lexma package includes driver, and States map is compatible with Windows XP and 1.0 and USB 2.0,1.1. Do I need a card reader driver? Where can I find one?

  Hi ayal_843,

  ·         -What is the issue limited to the card reader?

  ·         Other USB devices work well?

  Try the following.

  Method 1: Run the Fixit tool in the following article.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  Method 2: Log on to the computer manufacturer website and update the latest chipset drivers and other updates to the device driver.

• SD card reader driver for Windows 7

  Laptop dv8025EA HP no. EK765EA product

  Just passed under operating system for above laptop XP to Windows 7. Windows 7 operating system is Dell Computers.

  One of the problemsI resulting, the SD card reader no longer works. The light blinks as normal, when I put the SD card into the slot of the card reader, but no AutoPlay dialog box appears.

  I think it may need a driver to operate the card reader. I searched HP website for a card reader driver Windows 7 but cannot find anything. As a result, I can't transfer the photo from my camera on laptop camera.

  A XP driver will do the job? or is there another solution? Thanks John.

  Hello:

  Use the Vista driver for the nc6400 business notebook and it should work.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_70996_1%257CswEnvOID%253D2103%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer.

  I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer. Device Manager indicates that they are working correctly. Sometimes my dvd drives disappear. I have to do a system restore to solve this problem. For some reason any Win7 has problems with storage devices. How to stop these dissappearing from my Computer(or not getting a drive letter assigned) storage devices?  It's very frustrating. And, System Restore is not a way to solve this problem, it's just a quick fix. I have three internal hard disks, three hard drives, card reader external drives, USB keys, disks, etc. I need a way to solve this problem when it happens. So far, happened about 9 times in the last six weeks since I installed Win7 64 bit ATU.

  There may be an update of the motherboard BIOS to solve the problem.

  Otherwise, as your card readers are no doubt attached via USB the usual way to solve this problem would be to uninstall the drives and the USB controllers and devices in the system restore.