Addition of DIMMs for Inspiron 620

I have an Inspiron 620 with 2 DIMMS of 2 GB. 4 GB of ram is too small now. To upgrade to 8 GB, I need to replace DIMM 4 GB DIMMs? In other words, there are only two slots? (I never opened the thing at the top).

Thank you.

RON

Granny2050

Another question: it has been a LOONG while given that I have newly introduced a chip of RAM to a computer. Once I remove the old DIMM and add new and power the machine back on it, it automatically detects the change in RAM, or I have to go in this screen of settings?

Granny2050

Yes, the memory is compatible with the Inspiron 620.

http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/Inspiron-620

http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-620_service%20manual_en-us.PDF

Bev.

Tags: Dell Desktop

Similar Questions

  • Ivy Bridge CPU Upgrade for Inspiron 620

    As stated above, I have a 620 Inspiron with a Core i3 2120 which is a Sandy Bridge processor. I have the opportunity to get a Core i5 3570 for a very good price, which is a processor Ivy Bridge, but the word is that the Ivy Bridge processors can be used in some of the Sandy Bridge motherboards with a BIOS update. According to my system in the Device Manager devices, I have the drivers for chipset H61. However, I can't have an answer directly from anyone or not an Ivy Bridge CPU will work in my computer. I thought that maybe someone from Dell could help me this clear up because I'm not sure I can return the CPU as soon as I remove it from the box. It would be a fairly expensive mistake. Any comments would be greatly appreciated.

    I don't think that it will be possible, because Dell does not have a BIOS for your specific model supporting Ivy Bridge. They may have sold a 620 with Ivy Bridge, however the more specific model number will be different, and they contain different parts and require different BIOS. For example on the number of specific model, the original Dell Inspiron 15 7000 series had a model number of 7537, the new 15 Inspiron 7000 (same model) series has a model number of 7547 (different specific model number)

  • Dell Inspiron 620/Vostro 260 NO Bios for AHCI

    Dell Inspiron 620/Vostro 260 NO Bios for AHCI

    Interestingly, I couldn't even update the bios without the INTEL drivers.

    Check in the Device Manager, the machine uses the ATA drivers not AHCI drivers

    AND will not install the INTEL RST drivers.

    Why is this?

    I tried to upgrade to the version of the Bios A04, but this made no difference.

    I did some research and discovered that the chipset in this system, the H61, simply does not support AHCI or RAID. There is no way to activate for a reason. :(

    Wish I had known this. The value of this system really went down the tube if you intend to launch an SSD in there.

  • How can I driver me for Dell Inspiron 620 missing network controller

    How can I driver me for Dell Inspiron 620 missing network controller

    On the Dell support site, specific to your tag #.

    http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620

  • R9 270 x and power supply in a dell inspiron 620 for $200 after rebate?

    So, as you can see in the image below, you can certainly hold a 9 inch gpu in this computer that the 270 x im is less than 9 inches for fitting will not be a problem.

    en.Community.Dell.com/.../4571.620VID.jpg

    The needs of 500 watts and 2 6 pin connectors PCI card this power supply has

    www.superbiiz.com/detail.php; c = CJ<----- link="" to="" graphics="" card="" ($169="" after="">

    www.newegg.com/.../Product.aspx; cm_re=atx_power_supply-_-17-438-016-_-product< -----="" link="" to="" power="" supply="" ($30="" after="">

    So the question is will the PSU and GPU work in a dell inspiron 620 with 8 GB of ram i5 2310 and 1 TB of memory?

    jojokidc

    The EVGA 100-W1-500 - KR 500W ATX12V / EPS12V 80 PLUS certified Active PFC EVGA 100-W1-0500 - KR 3 PSU should fine in Mini Inspiron 620 Tower.

    As must the Sapphire DOUBLE-X AMD Radeon R9 270 X OC 4 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express video card, offering space, especially since the locations of memory and the hard drive Assembly.

    Bev.

  • Position of the jumpers pin on a MB from MIH61R Dell (Inspiron 620)

    Hello and help!

    I bought my wife a new Dell Inspiron 620. I was dusting from the inside and come off a jumper connector. It's a PIN of five (5) labeled PWRSW1 on the outside edge towards the end of the DIMM. The MB is a MIH61R. Can someone tell me the proper position for the rider on PWRSW1?

    THX

    Let's save a nano-second...

    Need to ask if you are sure the rider was actually this 5 header pin motherboard? Could he have come off some other header?

    I just ping Dell-Chris M to see if he can get some specific information for you...

  • Cloning the hard drive on desktop PC Inspiron 620

    New Member, first post here, great resource.

    I work a friend with his desktop computer Dell Inspiron 620; 3.5 years.  The hard drive begins to run out, but computer still works fine right now.

    I ordered a recovery and support on the way via Dell out of warranty support in case the disc falls in catastrophic failure before we get to this.  But rather than use this recovery media, reload the operating system, drivers, all applications, customization, etc.  I'm thinking of 'cloning' of the current hard drive while the original hard drive is still operational.

    I have never cloned a drive before, but I understand that this would be the procedure. I buy a new identical replacement hard drive (found a 3.5 Sata 1 TB size) and also buy an external USB enclosure for the new disc, connect the new drive via a USB cable, start the cloning software, and then install the disc cloned when cloning is done in the computer?

    No disadvantage of 'cloning' vs reload the operating system?  Any recommendations of any free cloning software, I consider using?   Cloning especially appealed to me because it is a highly customized small business computer.  Get this computer to its current state the long way is certainly feasible, but I want to do the simplest possible.

    Thanks in advance for help people...

    Birchlake

    New Member, first post here, great resource.

    I work a friend with his desktop computer Dell Inspiron 620; 3.5 years.  The hard drive begins to run out, but computer still works fine right now.

    I ordered a recovery and support on the way via Dell out of warranty support in case the disc falls in catastrophic failure before we get to this.  But rather than use this recovery media, reload the operating system, drivers, all applications, customization, etc.  I'm thinking of 'cloning' of the current hard drive while the original hard drive is still operational.

    I have never cloned a drive before, but I understand that this would be the procedure. I buy a new identical replacement hard drive (found a 3.5 Sata 1 TB size) and also buy an external USB enclosure for the new disc, connect the new drive via a USB cable, start the cloning software, and then install the disc cloned when cloning is done in the computer?

    No disadvantage of 'cloning' vs reload the operating system?  Any recommendations of any free cloning software, I consider using?   Cloning especially appealed to me because it is a highly customized small business computer.  Get this computer to its current state the long way is certainly feasible, but I want to do the simplest possible.

    Thanks in advance for help people...

    Birchlake

    There is no need to buy an external enclosure, just install the drive to be cloned as secondary, all you need is a SATA data cable, there is a spare SATA power connector already within the chassis, for an additional HD.

    The simplest method I prefer is to clone the existing hard drive to the new, that will also transfer all applications and programs.

    You need an imaging utility, similar to True Image Home 2016.

    http://www.Acronis.com/homecomputing/products/TrueImage

    Acronis resize partitions transferred to match the size of the new hard drive.

    I also found the free version of AOMEI of Backupper to be excellent and have used it with great success with Windows 8.1 and 10

    http://www.backup-utility.com/free-backup-software.html

    Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

    First, install the new drive as the secondary and the image of the main hard drive in it.

    Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

    Start the system with only the new hard drive connected.

    Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

    Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

    As we already mentioned, it will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

    Bev.

  • Inspiron 620 SSD upgrade is no longer support AHCI with Windows 10

    Hi all

    I had installed a Crucial SSD of CT256MX100 when you use Windows 7 without properly checking the parameters of AHCI and TRIM. This seemed to be working very well and providing very high throughput, however, upgrade to Windows 10 (from one day to the next... :/) there was a significant slowdown (20 second power to 4 minutes). After having looked around for a way to remedy this, I was unable to find the option AHCI in the BIOS for my Inspiron 620. It says in the manual of the system it is an option, an idea on how to activate it? Reinstall the OS?

    To all those who can offer constructive help, thanks in advance!

    I think you'll find these (which were the first latitude to support SATA) used a SATA to PATA Bridge chip - the controller is actually PATA, using a bridge to the SATA drive.  There is therefore, no AHCI option on them.

    The Dx30 models were the first with native SATA (and AHCI) support.

  • Removal of the hard drive on Inspiron 620?

    I must be really slow because I saw someone else asked this question, but how do I remove hard disks of the computer?  The online manual shows the years 620, which has a different configuration. This manual presents a tab on the cage of the hard disk that you push and then lift.  My 620 has no tab.  I pushed and pulled this thing in all directions without success.  I have removed the screws on the rails, but can not remove the individual unit either.

    Thanks for any help.

    Ormazd72

    I must be really slow because I saw someone else asked this question, but how do I remove hard disks of the computer?  The online manual shows the years 620, which has a different configuration. This manual presents a tab on the cage of the hard disk that you push and then lift.  My 620 has no tab.  I pushed and pulled this thing in all directions without success.  I have removed the screws on the rails, but can not remove the individual unit either.

    Thanks for any help.

    Ormazd72

    The terms of withdrawal and the replacement of hard drives of the Inspiron 620 minitower, appear on pages 19/20/21 here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-620_service%20manual_en-us.PDF

  • The Inspiron 620 Spec issues

    Had some questions about my Inspiron 620.

    Brand and model of the Mobo?

    Level watt PUS?

    Can I replace the motherboard with a 3rd party, in the same turn?

    Recommendations to replace the power supply, RAM, processor and video?

    I have the 2320 i5, 8 GB of Ram and AMD 6450.

    Brand and model of the Mobo?

    Inspiron 620 owner Dell Board.

    Level watt PUS?

    300W

    Can I replace the motherboard with a 3rd party, in the same turn?

    The Council is a standard size but the front panel wiring is owner.  You will need to do a bit on the rewiring of fly or to replace the case.  Also note that stock heatsink from Dell that it does not fit in a spare parts advice - you will need a new if you change the jury.

    Another advantage: If you are replacing the card, you have more a Dell system, which means not activate Windows.   Budget for a copy in the Windows retail if you change the motherboard - you effectively build a new system.  Microsoft won't activate copies of Windows OEM on the boards of spare parts.

    Recommendations to replace the power supply, RAM, processor and video?

    I have the 2320 i5, 8 GB of Ram and AMD 6450.

    Essentially, you can build a whole new system - if you take this route, reuse, keyboard, mouse, monitor and drives – everything (case, power supply, heater, fans and everything you want to update - is replaced).

  • Inspiron 620-7750 Radeon with 450W power supply installed does not start

    Hello!

    I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

    • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
    • Memory8 GB / 8 GB (max)
    • Windows 7 Home Premium 64 - bit Edition operating mode
    • Optical DriveDVD±RW
    • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
    • Integrated graphics controller

    Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

    At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

    Please, any help would be fantastic!

    Thanks in advance!

    The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

  • Inspiron 620 - readers how?

    My inspiron 620 came with the 1 TB drive. I would like to put a small SSD drive in Ubuntu partition/Boot and add a 1 TB drive more and make the two sata drives RAID 1 (software raid) for the rest of the Ubuntu installation.

    My question is, how many readers I can connect in the 620 inspiron? If it does not support 3, what are my options?

    Hi ndizzle77,

    Good day and welcome to the community!

    Thanks for joining us. Inspiron 620 cannot contain only 2 maximum HDD. The option that we have is for you to install HDD and upward together in RAID 1. And you can make the partition on a single disc. For anything else, let me know. I'm happy to help.

    Thank you and best regards,

  • Questions about upgrading the video card in the Inspiron 620

    Hey guys... I want to add a discrete graphics card to my new Dell Inspiron 620.  My power supply is rated at 300w.  Are there maps decent graphics that I could use that would be compatible with the 300w PSU?  Also, if I upgrade my diet as well, which could result in the cancellation of the guarantee I have on my new Dell?  Thanks in advance!

    Much here on the forums have used the HD 5670 on their units of 300 watt with no problems.

    By the table below, you can see that the HD 5670 is only set to 190 watts in charge for the entire system.   I think that the video card will do only about 50-60 watts in game situations and where the only game not only around 20 watts.

  • Reader of CD/DVD of Dell Inspiron 620 will not be open.

    Original title: DVD/CD does not open

    The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.

    FYI: I don't know if this means anything but I have a Dell Inspiron 620.

    The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.

    Whenever the CD/DVD cannot be purchased, it is longer practice of using the average pin hole. But this should be done when the computer is turned off as ejection outwardly replaces the internal control of the drive. Therefore, it is very likely that the problem arises.
    You can try this:
    Restart the PC-> press F2 when you see the Dell logo-> control if the drive is displayed in the summary of the BIOS settings screen. If this is not present, contact Dell support - the drive must be replaced.
    If it is present, try to press the eject button to see if the come out. If so, leave the BIOS settings, start Windows and check. The drivers will be installed by Windows in most of the cases, and if not, you can download it from Dell from the link mentioned by Manasa Sirahatti. In addition, if you use third-party programs to burn the disc, try to uninstall it and check. If it works, and then reinstall the program.
    The problem will be solved in most cases, otherwise, the disc must be replaced.
  • Inspiron 620 MT switch drives me crazy (hitting and lack of response)

    My desktop computer Inspiron 620 is a few weeks... From the moment where I started using it I noticed the button walk / stop reacted very badly... After playing with him (pushing several times), it should feed into the system... so, I informed the Dell... they sent their technician with a new front end and a switch... After mounting the new components... same thing... It would be only power system after a few thrusts communication... He was perplexed and went far to say that he would inform Dell. So I'm stuck with the problem... Funny, is that the problem is worse when I try feeding the system first thing in the morning or after a long period of time... once I managed to power the system, the rest of the day I do not seem to have the same problem... I wonder... If the problem has nothing to do with the Power button but another component... Am I the only person experiancing this issue? Any ideas what I send the pc to Dell?

    Hi guys,.

    I have the solution!

    I extended my warranty for two years at a price of £70.00

    I went to Dell Support cat.

    Following the advice of the technician, I updated the driver from the system board and then updated the system Bios.

    Restarted the PC and everything is now PERFECT.

    Launches its first press of the power button EVERY TIME.

    You might be able to do it without the help of a technician of Dell.

    Good luck

    Hope you all get this fix.

    Kind regards

    Paul

Maybe you are looking for

  • How do disable you a restore session each time that you enter in a new session?

    I enter a new session and it restores my last session after closing. I tried all the beasts on: config suggested other issues stuff and it didn't work. I have a homepage set. I have the good session restore attributes, set to false. I don't know what

  • identify the appleworks files

    I have on my hard drive to a number of AppleWorks files. I still have an old PowerBook with AppleWorks installed so I could - and want to-use to open all my AppleWorks files and save them is a different format (they are for the most part, spreadsheet

  • Why my microphone is distorted when I start my tablet PC?

    Speech recognition does not work when you start upward because the microphone level is full 2/3rds and stuck there.  By 'level is 2/3rds complete', I mean the level indicator in the comments box or the speech Properties window shows 2/3rds full.  Usu

  • Task of Z2

    Hello, I had a red spot on my Z2, I can't remove it with water, is there a solvent any to help out me?

  • What new photoquality garlic in those support paper size in the printer driver?

    I have a new HP Photosmart AIO 7510.  Much to my surprise the printer driver does not support create 6.5X10 inches, 5.5X8.5 inches for card stock for example custom paper sizes.  I used to have this feature in my old HP Photosmart 5150C all-in-one.