additional improvements

Similar Questions

• improve windows performance index

  Please suggest how to improve the results for:

  1 performance for windows aero desktop

  the current score is 7.2. is there further scope for improvement, without compromising a lot on the way in which windows appear. from now the aero settings are set at: as recommended by windows

  2 3d graphics business and gamming

  the current score is 7.2, the system is with nvidia k2100m grahics card of 2 GB of memory dedicated. is there to provide for additional improvements?

  How to improve the performance of office for Windows Aero' void / score?   Answer Palcouk not really, without changing your vid card, assuming that it is a desktop computer

  J W Stuart You can check if you have the latest graphics driver installed. This may help a bit, but as mentioned Palcouk you must update the card to get the best scores.

  Note: The 2D under-score graphics are not as important as the score of the game if you are in the games.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

• Equium A60 issue of the wireless USB mouse

  I bought 3 optical mouse for my equium A60. The first 2 have worked for a short period, but then appeared to be very erratic, beating on the entire screen and the slightest touch. I just bought a third and spend money on it to combat this problem, but it's always like it. It's a belkin wireless optical mouse. The connection is USB and I have no driver to install. It flies just all over the screen completely uncontrollable. Please can someone help.

  Hello

  Have you checked the pointer options in the properties of the mouse?
  In my opinion, you should try changing the query options to slow down the pointer options.
  In addition, improve it the accuracy of the pointer must be marked.

  Good bye

• Update the installation of the wrong service pack, Vista Home premium

  I currently have 32 bit vista Home premium which is according to the updates and the small area under the centre currently on service pack 3. Windows Update however wants me to install vista service pack 1 and it's the only update, what it will be. I tried the microphone. FixIt program nothing works, and have tried to install the update that was not not so every night for a month. All possible solutions? Comp Card: amd thuban 6 c 1055 t, 8gs ram, nvidia graphics, Msi motherboard 550ti, HDD 120g ocz ssd.    Thanks in advance

  Hello

  What exactly happens when you try to install Service Pack 1?

  The update of Windows resolves it displays an error message or error code?

  Follow this link to verify if the Service Pack is installed on the computer.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I want to let you know that Windows Vista Service Pack 3 is not available and you may need to download Windows Vista Service Pack 1:http://support.microsoft.com/kb/936330

  Follow this article to Learn how to install Windows Vista Service Pack 1:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Once you have installed Vista Service Pack 1, you can continue to install Windows Vista Service Pack 2. This provides significant additional improvements for Windows Vista.

  For more information, go to Learn how to install Windows Vista Service Pack 2:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps.

• The search in Vista problems

  I am running Windows Vista Ultimate 64-bit and am shocked by the inept research system.  There is absolutely no way to search for a file in ways other than by name.  I am looking for a picture or a file that was taken on a date in December 2010 or January 2011 and there is no specific name attached.  Windows XP allowed me to search by date so it makes absolutely no sense to have removed this possibility in an upgraded operating system.

  Any suggestions are appreciated except where you open the Windows Photo Gallery and see the dated files.  I do not use this program for all images, it does not appear in this viewer.  Also, I often need to search for files by date and photo gallery would not be appropriate to this need.

  Windows 7 [I don't know Vista] - If you click in the search box, a small drop-down menu appears that has a couple of keys in blue, click on date modifed, you can define a single date or a range, and then enter a keyword, if necessary [elephant or everything that you might have used the name of the photo or the properties] and back / click the search icon.

  Additional improvements [similar to Ronnie]

  I used the method of Ronnie put up a saved in my documents search using the keyword 'file' - it takes several seconds to run during the implementation, but then runs quickly in the real job.  I click on this shortcut to search [saved in Windows explore, Favorites] and enter the keyword required for the task in hand [elephant or other] and then he looks as intended to elephant in my documents [why I 37 files containing that Word is beyond me].

  You can restrict the search by using the key

  name:

  and it will limit the search to files whose name contains the word elephant [8 results].

  I used the example that I had put in place to avoid errors in my explanation.  You can use any other search terms.  The syntax is http://www.microsoft.com/windows/products/winfamily/desktopsearch/default.mspx

  and I think you'll find a key to use for the photos [it is a long document, so it takes time to study].

  I hope it's clear.  It is more complicated to implement than just using the date filter, but could save you time if you do this research frequently.

  Good luck

• LaserJet 2605dn colors is more saturated

  I just replaced all ink cartridges 3 colours in this old war horse after run them all the way.  The black toner was not replaced and is still saturated, but colors are now 'thin' and biased towards the yellow.

  Comparing a former 'supplies' with a more current status Page, I can see that yellow is almost as full as it used to be, cyan is much less, and the magenta is quite pale.

  I tried to start 'cleaning up' Mode, but that was of no help.  Then I tried 'calibrate colors,"which could have darkened a bit, certainly carries yellow cyan almost to complete saturation, but only improved the magenta to halfway to the original.  A second "calibrate the colors" didn't give any additional improvement.  Just magenta will not completely saturate.

  I have only three guesses which might be relevant: 1) the cartridges ranging in the machine in order, black, yellow, cyan, magenta, from top to bottom, if saturation level drops gradually from top down.  This might be relevant?  (2) these toner cartridges were purchased in a pack of three, but have been sitting around awhile.  The only thing affixed to the individual boxes of toner that resembles a date code varies only from 20120828 (yellow) 20120918 (magenta).  (3) I mainly print in B & W, so I often use "Replace supplies" in order to continue to print without replacing the color toners.  I also use this mode to "take out" the latest in a black cartridge, which often turns out to be of the order of 100 additional pages!  (I always replace the cartridge incriminated as soon as the printed pages are starting to be tinted with the color, indicating, I suppose, that the waste-toner cartridge becomes too full.)  I did this serveral times before without problem.

  Any help would be greatly appreciated! -jclarkw

  Hi jclarkw,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more than exhibition, I would say, post in the trade forums since it is a commercial product. You can do the HP Enterprise business community.

  Hope this helps and have a nice day!

• Media Player 12 is not playing music through all before only speakers (5.1) 2 & void.

  Once I've changed in XP to windows 7, I have not noticed Media Player no more playes music through all 5 speakers.  The system is configured correctly, and DVD in 5.1, but no music more plays.

  I read that vista has a tab under the speaker Configuration to allow 'fill improvement', but it's not in Windows 7.   As I noticed this problem I installed the drivers for my audio hardware, but still no option anywhere to play music on the speakers.

  How can I fix it?

  If you have an audio device realtek hd, you can go directly to the site and get the most recent update.  It tends to be more up-to-date than what Microsoft pushes.  From my experience with Realtek and Windows 7, it makes a big difference to get the most recent drivers from them.

  Are your speakers connected directly to your computer or you are using an optical output to a receiver?

  Do you know what type of audio device you have?

  IF you are connected to a receiver, do not forget that the DVD is integrated with the encoding for if there is something to your receiver to surround sound.  You need something to take 2 channels of audio and turn it into surround sound before being recognized.  You CAN turn his 2 surround channels simulated on most receivers clicking through the dolby settings, but the question remains that everything worked fine before the upgrade.

  Insofar as this change in the upgrade from XP to 7, it looks like a driver problem.  WMP is designed to recognize the encoding it is fed, but not to assign any what additional coding.  Your driver will be award any additional improvement and manage the allocation of the audio to the appropriate channels.

• SSL configured to use 3DES but newspapers show that des is negotiated

  The ASA is configured to use the following encryption protocols:

  SSL encryption aes256-dhe-aes256-sha1 sha1, 3des-sha1

  But newspapers show the ASA announcement OF and negotiates finally on with the customer. The SAA is showing a bug and really negotiate IN the newspapers are incorrect and should show 3DES. Has anyone else seen elsewhere? Thank you

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725007: end of the SSL session with client outside:172.17.9.54/61805.

  <151>: Jul 24 16:48:43 CDT: % ASA-sys-7-711001: webvpn_session.c:http_webvpn_find_session [175]

  <151>: Jul 24 16:48:43 CDT: % ASA-sys-7-711001: webvpn_session.c:webvpn_update_idle_time [1728]

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725001: handshake SSL with client outside:172.17.9.54/61856 for TLSv1 session.

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725010: device supports the following 3 cipher (s).

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [1] encryption: DES-CBC3-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [2] encryption: AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [3] encryption: DHE-RSA-AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725008: outside:172.17.9.54/61856 client SSL offers the 5 cipher (s) following.

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [1] encryption: AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [2] encryption: AES128-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [3] encryption: DES-CBC3-SHA

  <151>: 24 July 16:48:43 CDT: ASA-ssl-7-725011%: [4] encryption: RC4 - SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [5] encryption: RC4 - MD5

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725012: device chooses cipher: DES-CBC3-SHA for the SSL session with client outside:172.17.9.54/61856

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725002: aircraft completed the SSL negotiation with customer outside:172.17.9.54/61856

  Everything's fine, DES-CBC3 is 3DES.

  And additional improvements, reorganize the encryption algorithms are the most desired at the beginning. In addition, you can remove 3DES if there is no more XP-customer.

• Is it allowed to operate the processor to 100% minimal state... ? And this effect of thing on life of processor or not. ?

  I have Core Processor i3-3220.

  1. If I put the speed of the CPU to 100% minimal state so he will be on the life of the processor or not... ?

  Another issue is

  I have Kingston Hyper X Black 4 GB 1600 MHz RAM. It is a locking device.

  2. What does mean more ways of locking. ? And what should the configuration for locking. ?

  The 100% figure is purely the clock speed and used to be the only way that processors would work. SpeedStep or limitation allows the CPU to reduce its speed to save power. The processor is designed to run at this speed and suffer no harm. Even when a CPU has no threads to execute that does not actually stop and must cover (similar to the soldiers walking time) ineffective cycles

  I think you mean Overclocking. Memory is sold as being able to turn a rated speed or a frequency that is normally it is maximum for 100% reliability, although they may work more slowly. They need a specific voltage to run at this speed, overclocking will allow you to vary the tension to get the memory to run at a higher speed. This is normally done to also overclock the CPU for better performance.

  Personally, I find overclocking performance benefits are so marginal in terms of actual use (don't not benchmarking) that the headaches additional improved cooling necessary in particular for the CPU not make worth.

• InDesign crashes when the updating of linked files

  Using the palette links to open an Illustrator or Photoshop file, edit it and save it, back to InDesign, InDesign will crash every time. Reopen InDesign the link will display as changed (yellow triangle with exclamation point). I can then update the link and continue to work.

  InDesign CC2015.4

  11.4.1.102 build

  Mac OS X 10.11.6

  MacBook Pro

  Intel Core i7 2.8 GHz

  16 GB of ram

  AMD Radeon R9 M379X 2043 MB

  No change in behavior after the replacement of my preferences.

  The fixed!

  I removed the scripts that I had added over the years and is no longer crashed when updating of links... for a trial. Then I replaced my preferences again and it seems to have returned to normal operation.

  Thus, if the replacement of your preferences does not resolve the problem, try to remove all the additional improvements that you added and replace your preferences again.

• What are the best practices for a new employee to learn inside the instance of their business of Eloqua as efficiently as possible?

  We have companies everything changed at some point in our lives. And we all go through the process in the first weeks, where you feel new and are just trying to figure out how not to get lost on your way in the mornings.

  On top of that, trying to familiarize yourself with your new company Eloqua instance can be a daunting task, especially if it's a large organization.

  What are the best practices for new employees to learn as efficiently and effectively as possible?

  I am in this situation right now. Moved to a much larger organization. It is a huge task trying to understand all the ins and outs not only society, but also of the eloqua instance, especially when she is complex with many points of integration. I find that most of the learning happens when I really go do the work. I spent a ton of time going through the programs, documentation, integrations, etc., but after awhile, it's all just words on a page and not absorbed.

  The biggest thing that I recommend is to learn how and why things are made the way they are currently, ask lots of questions, don't assume not that things work the same as they did with your previous employer.

  Download some base in place level benchmarks to demonstrate additional improvement.

  Make a list of tasks in the long term. As a new pair of eyes, make a list of things you'd like to improve.

• API for payments Sub

  Hello

  Y at - there any API to Sub in Oracle payments payable?

  The condition is as follows:

  After the program format payment Instruction is subject to all of the application, a file is generated

  another program is then started to search for empty tags in the file

  If it detects empty tags, the file will not be sent to the Bank

  all payments should be cancelled/canceled.

  This is why I need an API to cancel any payment made in overall demand.

  Thank you

  I already developed a solution for this 3 years ago and it is presented in document 14 WORK. Let me know if you are interested.  This is a main feature that was missed by the Ebiz team.

  The solution is very simple.  You need to look at the form of payment; inside, there is full logic to cancel a payment.  The rule is that you can do online, you can do batch.  All I did was to take the code completely including the 'public' package, which is called in the form.

  Once this is done, I had designed additional improvements to this by integrating the process was if the user wants to.

  How the solution I have working is first of all create an integrator Office to manage the user data for example bank account number, check number, date Sub, Bill action, keep the name, reason for hold (these are exactly the fields you see on the payment form when you try to cancel a payment. Once the transferred data, trigger the simultaneous program sweeping the intermediate table and process these payments (eft/checks) for example cancel/Cancel including invoice cancel option.

  Cheers.

• What is the difference between Photoshop CS6 [Legacy Version]($410) and Photoshop CS6 ($699)

  What is the difference between Photoshop CS6 [Legacy Version]($410) and Photoshop CS6 ($699)

  "Drop the support for WinXP" does not mean "Will not work on Windows XP."  It simply means that Adobe will not help you if you have a problem.

  I think that the reference to the 'legacy' version relies on the fact that CS6 is the latest version of "permanently licensed" until the CC model came into force.  Both ads are referred to this version, using different terminology.  There are actually two versions of PSCS6.  One is permanently licensed version, and is the version provided to customers who subscribe to CC, who got a few additional improvements over the version permanently licensed before being supplanted by PSCC.  But the version of PSCS6 within the CC is not available as a stand-alone product.

• Make a rounded flat circle?

  I have a flat drawing of the Earth on its own layer and shading, would like to make it look rounded. Paint on it with the tool brush to a low opacity can be a way to do it, but y at - it an easier way?

  Filter > distortion > come to glow about the effect I want, but spherize beside the plate. Anything else I can try?

  As an additional 'improvement', I used a bubble on an extra layer brush, paint with black on the circle.  If the size needs to be adjusted, it can be easily done, being on the separate layer.  I actually also duplicated the layer to make it more visible.  Ken, I hope you don't mind me using your image.

  Jürgen

  http://www.pixentral.com/show.php?picture=1bQ9q5nPoTDyQJ2r0TQrQJuslkK4C0

• Sluggish Camera Raw in CS5 vs. CS4

  My computer is Windows Vista Home Premium, 64-bit.  Quad Core Q6600, 2.4 GHz, 6 GB of RAM.

  When you run Photoshop CS4 with Bridge and Camera Raw, I could change the parameters, and the Preview update pretty much instantly, without lag.

  I've updated recently for CS5, with its accompanying new version of Camera Raw, and I find that on this same computer, work with the same Raw files from my Canon 1 d Mark 2, it has a quite noticeable lag in the preview during the change of almost any of the settings.  It's pretty slow so he did seriously obstacle my workflow and makes me think of returning to CS4.

  In CS5, I have the following Performance settings:

  Available RAM: 5349 MB

  Ideal range: 2942-3851 MB

  I use Photoshop: 3209 MB (60%)

  These are the default settings used when it was installed.

  Records of work:

  I have a hard drive physical separate, chosen to do this, different from that where the operating system is installed.  Only that the disc is selected as a Scratch disk.

  History & Cache:

  History States: 20

  Cache levels: 4

  Tile cache size: 128K

  GPU settings

  NVidia GeForce 9800 GT/PCI/SSE2

  Enable OpenGL drawing is checked.

  These settings are pretty much the same that in my installation of CS4 (both are currently installed on this computer).

  Can this be improved?  As I said, this is seriously slowing my workflow.

  Thank you.

  Don Cohen

  www.dlcphoto.com

  DLC photography

  6.7RC - installed maybe a slight additional improvement.

  With this version of Camera Raw and setting noise of Luminance at 0, the offset is improved and is generally more usable, but still not quite so sensitive he was with CS4.  I do not seem to notice much difference bridge / Camera Raw from Windows or PS CS5/64-bit running.  And the Open-GL option seems irrelevant on my system.

  The help is much appreciated; suggestions on some additional settings to improve performance would be also welcome.

  Don

  www.dlcphoto.com