address book deleted virus blocked access hotmail no Windows Update could not download the antivirus scanner

OS Windows XP Anti virus Windows Defender attack 10/12/2011 Date. Started getting error messages telling me I had problems with memory and hard drive. I was responsible for carrying out the difficulty system for repair charges. Display shows failed to load segment, critical error of hard disk, hard drive damaged clusters, weak and delayed by ram reliability covered clerical errors screen. Update to Windows defender and attempted to update to Windows XP. Impossible to update despite following the instructions shown.

Hello

1. what tool to fix system did you run in order to solve the problem?

2. what exactly happens when you try to run Windows Update?

3. you receive an error message when you try to run Windows Update?

4 you did changes to the computer before the show?

5. have you tried to download Microsoft Safety Scanner?

Method 1:

Step 1:

You can try the steps of troubleshooting provided in the link below to fix problem with Windows update in Windows XP.

Cannot install Windows updates

http://support.Microsoft.com/kb/555461

Step 2:

Reset the Windows Update components

http://support.Microsoft.com/kb/971058

Method 2:

For the question with HDD, you try performing the control and verification of the disk if the problem persists.

How to perform disk error checking in Windows XP

http://support.Microsoft.com/kb/315265

Note:

Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

Method 3:

In case you haven't tried download Microsoft Safety Scanner, then try to download Microsoft Safety Scanner and perform a full scan of the system and check if the problem is caused by a Virus/Malware.

Microsoft safety scanner

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note:

The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Tags: Windows

Similar Questions

  • Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

    Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

    Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

    Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

    http://support.Microsoft.com/kb/834484

  • Whenever I have access to the internet through Firefox, I get a box with the message "Firefox could not download the search plugin / / / c:/Users/Patton/AppData/Roaming/Mozilla/Firefox/Profiles/b2qcb69.default/extensions. How to get rid of this thing? Th

    How can I get rid from this problem?

    Try the suggestion of cor - el

  • I can't access the internet. Diagnostic says I have problem winsock. Windows XP could not fix the connectivity problem.

    For windows XP Network Diagnostics says I have a problem with the Winsock provider catalog.

    Hello

    1. don't you make changes to your computer, after which the issue started?

    ID is recommended to run the program "Fixit" of this article or / and follow the steps manually and check if the problem persists.

    http://support.Microsoft.com/kb/811259

    See also:
    Windows wireless and wired network connection problems

  • After the recent Lightroom update froze on will grow.  Try to remove the p0rogram through CC cloud I was unable to remove it.  Then I deleted the program through the operating program.  I could not download the Lightroom through

    Where should I go from here?

    You're on Mac or Windows and what version?

    You make a good uninstalll using the operating system, or remove the program folder?

  • I worked with my address book deleting invalid addresses. Half of my address book is over. Is it possible to recover or restore the address book?

    I use Microsoft Outlook Express.

    1. turn on "Show hidden files and folders" by http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/

    2. open a Windows Explorer search [Windows key + F]

    3. in the search box to the foreground, type, or copy and paste

    * .wab ~.

    then click OK or press ENTER.

    4 search result (s) will be the backup copy of your address book Windows automatically manages.

    5. to open such a file, right-click on it | Open with | Select address book...

    Now missing contacts are still included in the backup?

  • I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

    I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

    How your problem is related to Windows Update (compared to the Windows upgrade)?

    You posted your question in the AVG Free Forum? -Online http://forums.avg.com/ 
    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Can not download the address book of Droid to the car system

    I have a Droid and have tried to download my address book in a Merdeces 350 - the car phone system recoginizes the Droid and will be

    make and receive calls via bluetooth, but not will not download the address book from the Droid. The drive system uses PBAP, there the Droid

    This support?  What should I do to make the download?    Thank you

    The phone has always been able to download to our system of cars, no one we told as prior post States, a message appears, only if you look behind the pairing from your phone with your car by pulling down the drop down menu and answer with a Yes.  I just finished the match with a Mercedes, a Porsche and a system of Kenwood in a Lambo.  Thanks for the post, Verizon and Google should be embarrassed they did not get out this info to its customers.

  • Error code: 1601 Windows Installer could not be accessed during the installation of Turbo Tax 2009.

    I try to install Turbo Tax 2009 on a Dell Inspiron 530.  I get the message that Windows Installer could not be accessed.  I tried all the fixes I could find and nothing works.

    When I try to install install 4.5 Redistributable, a dialog box appears saying "the update does not apply to your system" no matter which I choose in the list to download.

    What is going on?

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    Try the repost in the Forum Vista programs at the above address.

    They will help.

    See you soon. Mick Murphy - Microsoft partner

  • Windows Installer could not be accessed

    I looked throughout all message boards and help sites that I can find.
    Oh. The problem I have is that I can download all or what I want; I just can't install it. This is the message I get: "Windows Installer could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    I tried, but I think I'll just in circles. I even did the restore to how I got the plant. I bought my Windows Vista from Best Buy with her already configured and ready to go. I hope this is enough information for you to be able to help me; I'm crazy gong. I have not even could re - install my anti-virus. I'm a duck sitting here. Help! Please, I beg you.

    Dodimay says:

    I looked throughout all message boards and help sites that I can find.
    Oh. The problem I have is that I can download all or what I want; I just can't install it. This is the message I get: "Windows Installer could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    I tried, but I think I'll just in circles. I even did the restore to how I got the plant. I bought my Windows Vista from Best Buy with her already configured and ready to go. I hope this is enough information for you to be able to help me; I'm crazy gong. I have not even could re - install my anti-virus. I'm a duck sitting here. Help! Please, I beg you.

    On the Win32 worm virus warning - Conficker.B: you have probably turned off auto update.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • The network adapter could not establish the connection using the external ip address

    Hi team,

    Please look in the attached files.

    I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

    But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

    Here is the following URL will display the error during the startup of tomcat.

    The network adapter could not establish the connection,

    In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

    even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

    any help would be greatly appreciated!

    Thank you.

    Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

    Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

    In addition, your tnsnames.ora points to localhost...

    Stop using localhost, unless you only want things to work on the same machine.

  • SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

    I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

    My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

    I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

    I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

    I'll be dilly, or is it a problem in general, experienced by others?

    I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

    I appreciate your time and efforts.

    Hello

    I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

    Please, use the start command to start in the background of a single command window / batch script:

    beginning of "locator" cmd /c sqlf locator...

    beginning of "server1" cmd /c sqlf server...

    etc.

    Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

    Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

    Thank you

    Felicia

    Post edited by: SumedhWale

  • can not download the attachment for hotmail

    Can not download the attachment for hotmail. The "uploading...". "sign never finished. But attachment downloading works in Internet Explorer. I tried to disable, uninstall and reinstall silverlight, but none of them seems to fix the problem.

    You have a user agent which is corrupt and which identifies you as undefined GoogleToolbarBB

    See:

  • Cannot access control panel or Windows updates and not more sound

    Yesterday, I restarted my computer and a message keeps popping up that I am victim of software counterfeiting (in reference to Microsoft Windows) when I bought the computer at Future Shop just a year ago. Also, now there is a red X on the speaker icon in the corner and said "no audio output device is installed". I followed the instructions mentioned in another post, as well as other Web sites, and nothing seems them works. Above everything else, I can not access the control panel. It appears and disappears immediately. If this were not already enough, Windows Update does not work or the other. The icon is there, but whenever I click on it, nothing happens.
    I only bought the computer a year ago, and there is already a long list of problems with it. I'm at the end of my rope! If someone is brave enough to tackle these problems, I would really appreciate it. Thank you!

    So.Lai,

    Thank you for visiting the forums of Windows Update. Please post your Windows Genuine Advantage (WGA) related posts in one of the following links:

    For Windows XP:

    http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads/

    For Windows Vista:

    http://social.Microsoft.com/forums/en-us/genuinevista/threads/

    You will find the MVPS and forum MS Moderators who will be able to help you further. Do to the nature of your problem, you must do the following:

    Run the diagnostic tool - http://www.microsoft.com/genuine/diag/

    Then copy and paste the results in your post in the other forum.  No personal information is collected in the diagnostic tests.

    Thank you for visiting Windows Update forum.

    Rick

  • I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update.

    Silverlight only updated [failed] and I cannot uninstall

    I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update. Any suggestions

    Please repost your request in the Forum Microsoft Silverlight.  Thank you! Carey Frisch

Maybe you are looking for