Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix
Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?
It seems much more likely that the fault is in your TG782T on Windows.
Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections. It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems. It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.
Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP." What is "this setting of intellectual property?
In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured? Normally, it would set on "Obtain an IP address automatically." What was the setting of 'alternative' that your ISP you are trying?
The first thing to do is to get information on your work computer. Follow these steps:
1. click on start, and then type the three letters cmd in the run box, and then click OK.
2. Enter the following command and press ENTER:
ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
3. open the IP.txt file to your desktop
4. copy and paste the text into your response.
One of the lines in IP.txt will be something like the following:
... Default gateway. : 192.168.1.254
This number is the IP address of your router. Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.
At this point, it is possible that it will ask you a user name and password. If you did not one, use admin as username and leave the password empty box. If this does not work, there is a way around this, but it involves several phone calls from your ISP.
Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978
After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner). Click on the entry for "Home Network." Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility. What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).
Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg
Under the Network Configuration, the local IP address is set to 192.168.1.1. On your router, the default value for this entry is 192.168.1.254. Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users." Here are the settings that you want to search. The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).
Sorry I can't give you more specific instructions. Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.
Tags: Windows
Similar Questions
-
I recently hooked another monitor to my laptop, that was when the problem occurred, but even after restarting Firefox * and * my computer, it did not always work. By collapse, I mean when you press F11, the open tabs and the address bar appear smaller, and then they slide up until what you don't see it (unless you mouse over). Please help me solve this =)
Thank you!
You can right click on the tab bar or the Navigation bar mode full screen (F11) and make sure that "Hide toolbar" is enabled.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the start safe mode window or make changes.
-
Each of my email accounts was on a separate tab, so I could look at them all together, I managed to change the layout so that now I have to use 'Go', 'file' etc. I would like the old traced back but cannot find a way to change the menu.
I don't know about the separate tabs. Maybe you're talking about the pane of folders down the left margin of the main window.
In the menu bar select view-presentation-folder pane
-
Suddenly, the 64-bit Windows 7 Media Player doesn't have a location to save the ripped files. It is impossible to rip CDs. How can I fix it?
You can order these links on ripping...
You can try this procedure to restore your windows media player.
(1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)
(2) turning on Windows Media Player again.
a. go to start and in the search type 'Turn Windows has or not'.
b. click on the "Turn Windows features on or off".
c. check the "media features.
d. restart the computer.
You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.
Or you can use the previous versions of windows media player that comes from restore points or windows backup.
Or you can try to run 'Fixit '.
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
-
Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?
Windows Server 2008 network. Printers have ip addresses. Install the drivers from the Print Manager. /Terminal Server Workgroup installation.It's the same situation with XP. The print driver names must match. If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer. This is just my assumption, please correct me if this isn't the case.
The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.
Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
How can I fix my PC when he says that someone else has my IP address?
How can I fix my PC when he says that someone else has my IP address?
Original title: Nana
You can try to change your IP address,
Change your IP address on Windows 7:
1. open Netowork and sharing Center
2 where says connections, click Local area connection
3 click Properties
4. double click on Internet Protocol Version 4 (TCP/IPv4).
5 click on the point which is located next to the next IP address.
6 change your IP (ex.192.168.0.1).
7. keep your subnet and the same default gateway.
-If this does not resolve your problem, click the point to its original position to obtain an IP address automatically.
Let me know if it helps!
-
All the above say:
Before, when I typed an http address in my hotmail account, it could be highlighted; Since I have firefox, it is NOT highlighted. How can I get firefox to highlight an http address when I type it?Do you mean to create a clickable hyperlink while composing a new mail?
Just above the text box that allows you to enter the text of the message, there usually a bar of buttons with buttons to add updated text in shape like the bold and italic.
This toolbar can also have a button to activate a clickable hyperlink text link (look for a string like button).
You can select the text and click on this button to activate the link into a clickable hyperlink.
If you can not find the button, and then move all the to check the ToolTip of each. -
my e-maik has been deleted and I've lost all my e-majl addresses how can I get them back
my old e-mail address was cancelled and I lost all my e-mail addresses how can I get them back
You should contact your supplier of messaging software and your service provider for additional support.
-
I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?
This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps from the link below.
Method 2:
Follow the steps from the link below
-
I made a mistake in my email address when you first register. How can I fix it because all my emails are sent to an address that doesn't exist and I can't change it.
Hi Bethany,
Please check the help below document:
Change the e-mail address associated with Adobe ID.
Kind regards
Sheena
-
I can't install any updates for my computer at all, even the window updates is one of the many error messages I receive, Error 1606 could access the location %APPDATA%\ network. How can I fix it?
Hello
This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.
The steps to correct this problem involve editing the Windows registry.
WARNING:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.
Here are the steps to fix it.
Step 1:
a. Click Start, click Run, type ""regedit ' in the Open box, and then click OK. "
b. find the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
c. remove the entries that show the path that is listed in the error message.
Step 2:
886549 KB http://support.microsoft.com/default.aspx/kb/886549:
Open Regedit a. once again. In the left pane, click User Shell Folders, point to new, click expandable string value.
b. type the value name that you want to restore (AppData), and then press ENTER.
c. right-click on this value, click modify, type the value in the value data for the value name box and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming.
Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.
-
Cannot ping static IP to other network on the Internet.
I'm having a problem with Vista who don't get my XP boxes. When I ping the network public static IP address, it does not work on Vista home, but not on XP pro. I have all the network sharing on and I can ping other IP on the internet from Vista without problem. How can I solve this problem? Thanks in advance for you help.
Hello1. are you able to go online on the Vista machine?
2 you get an error message when trying to ping IP address on the Vista computer?We recommend that you reset TCP/IP on the Vista computer and check the result. To do this, see the following article, download and run Microsoft fix:http://support.microsoft.com/kb/299357Try the steps and post back results.Kind regards
Syed
Answers from Microsoft supports the engineer. -
My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.
Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...
-
This message p [ops upward when I run iTunes]
Money cannot connect to the store purchases.
If you have any firewall software, make sure it has been set to allow communication on port 443.
How can I fix it?
me too... same problem... just started
iTunes can't connect to the store purchases.
If you have any firewall software, make sure it has been set to allow communication on port 443.
MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23
-
When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'. How can I fix it? I have Windows XP
Thanks for the help. Discovered that my security on the tools setting was set to medium-high heat. Passed to way according to the instructions of the active-x and now able to access Windows updates.
Maybe you are looking for
-
Glued Profile Manager on pending
I just upgraded to Server 5.1 with El Capitan (10.11.4). In the Profile Manager, I am able to create orders (pushing apps, register devices, etc.), but none of the 'active' tasks will be complete. They are all stuck at the "expectation." Any ideas
-
I have an old white Mac Book. See details at the bottom of the email. The computer was bought in 2008 and 2009. I want to upgrade the operating system more recent. Can I do? How can I do? Buy a physical DVD? What OS should I buy? Thank you Alessio **
-
Error - 50 video rendering?
I made a small video in iMovie and it won't let me export it? Whenever I have try to export it to my office and in the library function, it comes up with a message "video rendering error - 50". " I exported literally just a video not long before tryi
-
After update 10 December 2015 for OS X version 10.10.5 - video not playing not in iTunes - no TV doesn't show (time at the bottom of the black screen counter remains at 0:00), movies (video meter at the bottom of the black screen ACCOUNT BEFORE, but
-
Where can I get a map of the EU to go form my US bought S7 Aspire?
I would get a card that works in the countries of the EU, if it is not available then a power source. This is what looks like the US plug: