Address not recognized by the address book.

To send an email. When you enter an address, after the first letter, the line goes red (indicates the system does not recognize the address, which is valid and in the address book). Can't seem to find a solution to the issue.

Advertisement

I think the OP is to do as I do; He begins typing and uses AutoComplete to connect to the address book. I type the words in my messages (don't we all?) it seems natural to be hit too in the address box. Three or four characters are usually enough, and it seems easier to look at than to browse a list, the names of my correspondents.

I think that there is a bug; Valid addresses are frequently marked in red. But if you typed the address part and the rest is provided automatically, then it from your address book is so good, no matter the color.

Tags: Thunderbird

Similar Questions

  • HP 6510 printer wireless not recognized by the computer

    Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

    Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

    Hi Karen,.

    -What version of Windows is installed on the computer?

    -What antivirus/firewall software you have installed on the computer?

    The document from HP concerning "printer does not maintain the wireless connection.

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

    You have tried most the steps mentioned in the document, but please try once more.

    Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

    Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

    Let us know if the steps of troubleshooting mentioned in the link will help.

  • 6 10 iPhone iOS is not recognized by the laptop Win10Pro

    6 10 iPhone iOS is not recognized by the laptop Win10Pro

    After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

    Why is this happening?

    I come to the last iOS 9.x.x?

    Y at - it and the new driver I need to download on my PC?

    I started to automatically backup icloud, but I want to import photos directly to my PC.

    Thank you

    Vicki

    Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

    TT2

  • I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

    I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

    This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

    I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

    Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

  • TV not recognized by the server-> 40L 73

    Hello

    My problem is already listed on this forum but I can't find a solution or explanation.

    I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

    Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

    When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
    But unfortunately he will not stay for the next time.

    Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

    Any suggestion? May be related to an IPv6 Internet connection?

    In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

    And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

    Thanks for your help and your comments in advance.

    Maybe you should just a few solutions of circumvention of the Commons:
    First, you must set the default TV.
    Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

    By the way: you should also check if your firmware is up to date. This can be checked here:
    http://www.Toshiba-OM.NET/firmware.php

  • Portégé R700 - 15L - 3 G is not recognized by the system

    Hello

    I already bought this laptop and I have problem with 3G driver to work.

    I downloaded the latest drivers from the website, but the device was not recognized by the system?

    Any ideas how to fix?

    Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

    When you use the FN + F8 key combination what options are available?

  • External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

    Hello!

    I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

    When I list the disk in the Terminal, the drive is listed.

    But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

    I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

    Is this possible?

    If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

  • Apple not recognized with the new update ID

    What now, after the update

    Apple not recognized with the new update ID!

    I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

    But after the last update my iPad say that "the apple ID or the password is incorrect."

  • HDD and dvd are not recognized in the configuration menu, what could be the problem?

    The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

    dhobs,

    Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

    You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

    Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

  • HARD drive is not recognized on the Satellite 2800 200

    Hello

    First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

    I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
    When it is started is says "insert the disk in the drive system. Press a key when readya?.

    My bios is ACPI BIOS version 1.80
    In Pheripheral in Bios it says disc hard = not used Mode.

    On page two discs i/o: HARD drive: no drive.

    I tried two hard drives and the two were not working and not recognized in the BIOS.
    I have no CD of restoration.

    My questions:

    What kind of central computer has this laptop?
    Can someone help me with the recovery CD?
    What can I do to fix this?
    How can I change my BIOS so that the HARD drive is recognized?

    My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
    But also with the disk hard 10 GB of origin, I had the same problem.

    I hope you can help me and once again I apologize for my English.

    Hello

    I'll try to help you my friend.

    > When it is started is says "insert the disk in the drive system. Press any key when ready
    This message appeared on my laptop after the HARD disk is dead.
    I had to replace the HARD drive and reinstall the operating system.

    I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

    I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

    Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
    > How can I change my BIOS so that the HARD drive is recognized?
    The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
    But vary important is that you use a compatible HARD drive.

    > Can someone help me with the recovery CD?
    Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
    What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

    Greetings

  • Hard drive is not recognized in the BIOS - Equium A60

    Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

    This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

    Thanks in advance.

    Hi Neil,

    Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

    Kind regards

  • Satellite P300 PSPC4E - new battery is not recognized by the operating system

    Hello

    I bought a new battery and it is not recognized by the system
    Satellite p300-PSPC4 win7

    drivers ok
    OK magazine

    The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

    the battery icon is present

    Thank you

    Hello

    Because your old battery is always recognized, I think you bought the battery is not compatible.

    That's why you should buy a compatible battery recommended by Toshiba.
    I think you can buy this Toshiba ASP.

    Welcome them

  • Satellite A60 - replacement HD not recognized in the BIOS

    I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

    I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

    The recovery CD installs saying there no drive selected.

    Can anyone offer any help or advice on what I can try next?

    Here are some technical details.

    Laptop Toshiba A60-672
    old MK4025GAS (40gig) drive
    spare MK4026GAT (40gig) drive

    Thank you
    Phil

    > I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
    For me, it looks more like an overheating problem caused by the internal temperature.
    It is a typical problem if the cooling fans are clogged and that air can circulate properly.

    > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
    One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

  • niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

    Hi all!

    I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

    Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

    I also downloaded example c# measure DC Voltsto compare with my request.

    Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

    DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

    I guess it is function of device PXI!

    I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

    NOR-DAQmx 8.9.5

    NOR-DMM 3.0.1

    NI-VISA 4.6.1

    NOR-MAX 4.6.2f1

    Roberto

    Hello Robson,

    Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

    KB 33A96PCW: receive error-1074118656 when running OR DMM screws

    Let me know if this might help.

    Best regards.

  • Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

    My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

    Hello

    1. have you made changes on the computer before this problem?
    2. What is the model of the keyboard?
    3. are you an error message or error code?
    4. which version of the Windows operating system is installed on your computer?

    I suggest you to consult the following Microsoft article and check if it helps.

    On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

    Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

    Keyboard and Microsoft mouse refer:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Reference:

    Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

  • Pandigital PANSCN02 scanner that is not recognized by the computer

    I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
    * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

    Hello

    You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

    I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Hope this helps,

Maybe you are looking for