address of the 0xf9ad6fda function caused a protection fault

Similar Questions

• Address of the 0x10001b12 function caused a protection fault

  Nice day!

  I have a problem. After you have installed the driver for printer HP LaserJet CP5225, users with OS Windows7 64-bit Enterprise had an error function address 0x10001b12 caused a protection fault (exception code 0xc0000005). This error every 5 minutes, this seriosly interfere with work processes.

  I need your expert help. Thank you!

  Problem was a bad printer driver. I changed works it to HP Universal printing PCL 5 (version 5.2) and everything fine!

• When you try to print to get address of 0x9ab41f function message caused a protection fault. (code 0xc0000005 exception)

  Original title: address of the 0x9ab41f function caused a protection fault.

  When I try to select preferences for my Canon MG6150 when you print a word document, the screen freezes after posting a panel with:

  Address of the 0x9ab41f function caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  I have to reboot to unlock the computer.

  Tried reloading the software canon and windows 7, but still no joy have the same failure anyone can help me fix this please?

  Hello

   

  Welcome to the Microsoft community!

  When you try to print a word document, you get the message as the address of the function 0x9ab41f caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  To help you better, we need more information.

  Is the issue limited to word document or it occurs with other documents as well?

  To work with the question, I would say that you are running the printer troubleshooter.

  Visit the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  You can also consult the site:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Unable to print error: ' 0xf4896fda caused a protection fault (code 0xc0000005 exception).

  Original title:

  Printing error on HP OfficeJet Pro 8500

  I'm on Windows7 64 bit and that you have installed the solution Center HP for the operating system of law.  Digitization of works fine but when trying to print on HP OfficeJet Pro 8500, an error message says "0xf4896fda caused a protection fault (code 0xc0000005 exception).  What should I do?

  Hello
  1. If it works much earlier?
  2. You did changes to the computer before the show?
  3. You are not able to print files or specific files?
  4. How the printer is connected to the computer?
  5. How you want to print? With the help of what program?
  6. The problem occurs with printing online or offline?
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Method 3:
  You can try to update printer drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752456#n301

  HP Print and Scan Doctor

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=OJ-106151-2&CC=US&DLC=en&LC=en&os=4063&Product=3752456&sw_lang=
  You can also consult the following link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  I hope this helps!

• Using the information in form field for e-mail address in the mailto function

  Hello

  I encountered a problem for which I seem not to be able to find an answer, even after several hours spent browsing the web:

  Basically, I have created a form that I want to distribute to my customers who are supposed to use for their clients. This is to ensure that all processes are standardized.

  My client fills part of the form with their contact information, including their contact email address in a separate field. The end-user (client my client) fills in the rest of the form. After completing the form, the end user is supposed to then click on a button that needs to send the entire pdf form by e-mail.

  I know how to set an email address recipient using the mailto: int; However, as I have many clients that the form will be distributed in the first place, I can't determine before the target of the mailto: command. So I was wondering if it is possible to set the target of the mailto: function to use the information that my client is entered in the contact email address field, so that, once this particular form field is filled, the e-mail address is imported into the functionality of the button and ensuring that the button send is very individualized.

  I would have thought that it is possible, as it is possible, for example, to use a part of the form to appear as the body of the text of an email, but since I was still very much a beginner/amateur regarding all things javascript/php, I've no idea what should look like the script.

  All thought and all help would be greatly appreciated.

  Greetings and thank you very much.

  Yes #3 is the right one.. .the email real option contains the property that has the e-mail address specified in it... then the false e-mail button to change this property before you send it. In your case instead of reference the DDlsi field, you must reference your field that contains the e-mail address.

  Make sense?

  If you're not used to the code, it can look daunting... . If you want to send your form to [email protected] I can code upwards for you so that you can see in your context.

  Paul

• Printer does not work, the address of the function Oxea7cf849 caused a Protection Fault (code exception Oxc0000005)

  My printer left printing from home computer. It allows to print from other computers on my LAN.

  Hi Minnie,

  1. What is the brand and model of the printer?

  2 have you made changes on the computer before this problem?

  3. are you able to print a test page?

  This problem can occur because the printer settings or readers try the following and see if it helps.

  Method 1:

  Refer to the steps in the following Microsoft article and check if that helps.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Why can I not print? http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Method 2:

  If the problem persists, I recommend you to Uninstall and reinstall the printer readers and check if it helps.

  Keep us informed on the status of the issue.

• Cannot remove return address on the envelope.

  I work in Word 2007.  I put a return address in the envelope function to print several envelopes.  Now I can't get out.  The deletion does not work.  I know that I can click on the button "omit", but which must be done every time you print an envelope, and I remember to do it with all the envelopes that I print at work.  How can I get rid of this permannetly?

  Click the Office button, and then click Word Options > Advanced Options .  Scroll down and remove the return address in the address box.  Click OK .

• SetCtrlVal used during the Thread function works causes memory leaks

  I am writing a program that works if... Or not work if... - see the next lines... :-)...

  The program includes a section, mostly GUI - and User Interaction.

  The other part is a DLL. In the DLL we readings on an external consultant controller RS232. Sometimes the controller card needs (called how much) time and this time must pass then the result can be read card controller... and so on...

  Blocking is not GUI-user-program for the expectation of the return value of the DLL functions (which need a few seconds to be finished) I start a thread in the DLL with

  CmtScheduleThreadPoolFunction (DEFAULT_THREAD_POOL_HANDLE, THREAD_FunctionX, & tmpTFP, NULL);

  with "tmpTFP" as an instance of type "TYPE_THREAD_FUNCTION_PARAMETERS":

  typedef struct
  {
  //
  int IntVal1;                // 1. Integer-Wert
  int IntVal2;                // 2. Integer-Wert
  int IntVal3;                // 3. Integer-Wert
  int IntVal4;                // 4. Integer-Wert
  int IntVal5;                // 5. Integer-Wert
  //
  int IntBuffer1 [32];            // 1. Integer-buffer (aktuell genugt einer)
  //
  Double DblVal1;                // 1. Double-value
  Double DblVal2;                // 2. Double-value
  Double DblVal3;                // 3. Double-value
  Double DblVal4;                // 4. Double-value
  Double DblVal5;                // 5. Double-value
  //
  char CharVal1;                // 1. (Single)- Tank-Wert
  char CharVal2;                // 2. (Single)- Tank-Wert
  char CharVal3;                // 3. (Single)- Tank-Wert
  char CharVal4;                // 4. (Single)- Tank-Wert
  char CharVal5;                // 5. (Single)- Tank-Wert
  //
  char CharBuffer1 [1024];        // 1. Char buffer (akutell einer genugt)
  //
  } TYPE_THREAD_FUNCTION_PARAMETERS;

  In the GUI-user program - I get fast by default-return value of the thread start function.

  Then I asked the DLL (some global state variables are used for this) when it is finished.

  According to the map-controller (RS232) contacted the waiting time depends on the 'mood' of the controller card.

  In the DLL-mark of the GUI-user-program routine now everything works fine - without using "SetCtrlVal!"

  In my GUI, there is a text box of the info/comment for messages. If I do a few outputs user using 'SetCtrlVal' I always errors, caused by the false "TYPE_THREAD_FUNCTION_PARAMETERS"-values in the service of thread. "» If I set a breakpoint at the beginning thread-function I see mostly erroneous values in my transfer structure variables. If I put a breakpoint in the thread-function-calling 'CmtScheduleThreadPoolFunction (...)"and at the beginning of the thread values are (mostly) correct!

  I tried several and different things - but:

  If I ONLY (!)  Commenting on the (!) of a line with "SetCtrlVal", the program works, all States are asked out of the DLL.

  If I replace the "SetCtrlVal" with a written record-file function clean everything works fine and after completing the program I can look at the log file and see all the user information. BUT with 'SetCtrlVal' instead or set or (...) it does not work.

  My description is maybe not entirely clear, but believe me: only ONE line the «SetCtrlVal "line - should be commented out to let the program run properly!»

  Because if the line "SetCtrlVal"is program-user-GUI, after the call to the thread in the DLL, the DLL-memory seems to be corrupted by the call "SetCtrlVal" in the user-GUI program.»

  Best regards

  F.

  There may be a problem in your structure that your variable is set.

  You said that, after the address of the variable in the thread function the appellant one ends. Now, as you can read help each value passed in parameter threadFunctionData of the layed function must point to an area of memory that persist when the fuction is running: If your variable is defined at the level of the functions it is not valid when the thread runs since the appellant finished and released its local memory.

  Your approach with a global variable is a valid alternative, but if it is the solution, you will find data passed to the thread function must be valid for all his life.

• I lost the search function of the messages and the folder "sent" under my second email address.

  The search function to search for messages that were sent to me has disappeared. I also have to email addresses in thunderbird. One shows all my sent messages. But there is no option "sent" under my second email address

  Lost search engine? This sounds as if you've lost a toolbar, or have lost a tool in the toolbar. Whatever it is, hopefully that will help the following:

  http://chrisramsden.vfast.co.UK/5_Lost_toolbars.html

  Do you have anything sent "from" this second account yet?

  Check the following is all / selected:

  View | Records | All the

• The IP address has changed on the Officejet L7590 caused XP machine does not see

  I have an Officejet L7590 connected to my wireless router, and it was works very well with our laptop Win XP via the network wireless for a few weeks. Then all of a sudden, we couldn't connect. So I checked the IP address through the front panel to find that he had changed from x.x.x.3 to x.x.x.4. By looking at the advanced properties of the control panel-> printers area he showed at the address x.x.x.3 (though that a button has been checked to always say 'print to this same device if its ip address changes'.

  So I managed to force a change to make it work by changing the ip address in the printer Control Panel icon manually, but nobody knows how to stop what is happening yet? What are the causes the IP address of the printer to change anyway - he is using DHCP of course but they change whenever you turn it on? We usually spend the printer off every night...

  Thank you!

  Nick

  Hello

  Set a manual IP address on the HP all-in-one device

• Install Firebug causes: two title bars, unable to open the tab addons and inability to use the vibration function, etc.

  After further research, I think this should be classified as a plugin problem...

  Firebug 1.7 X A10 causes two title bars (standard windows bar and a second inside with the new tab in Firefox just orange... both with minimize/maximize/close buttons), and other bizarre behaviors listed below:

  Any saved tabs to before the installation/activation are gone.
  Choosing Addons in menu does nothing. After you open a new empty tab Addons Manager is responsible.
  Choice of feedback-> me xxxx, does nothing.
  Hit the reload button does nothing
  URL bar (page address) remains the same between tabs (if changes to the loaded page)
  Addon Firebug works fine.

  After obtaining the Addon Manager (it took a bit of work to do) and disable Firebug, all problems are gone. My story of previous tab is also returned.

  This seems to be specific to Windows XP. I installed this version of Firebug with Win7 with success.

  The two title bars is a known - bug http://code.google.com/p/fbug/issues/detail?id=4012

• The power spectral density function counts inaccurate amplitude caused by the window function?

  I'm new to this forum, so please let me know if this would correspond better to a different discussion forum.

  Here's the question:

  I would like to know if the power spectral density function ("FFT PSD for 1 Channel.vi") automatically compensates for the loss of the amplitude of entry caused by the window function.  In other words, is a specific window correction factor applied within the PSD vi or do I apply manually?

  Details of the background:

  I tried to answer the question myself by generating a sine wave sampling, it as it is periodic in record time (i.e. 0 to each end of recording time).  The frequency of the sine wave was such that the frequency would exactly correspond to a spectral line in the PSD.  Then I generated the PSD of the sine wave twice: once using a Hanning window and once using a rectangular window (not on average in both cases).  The rectangular extent of the PSD with windows to the frequency of the sine wave is 1.5 times the size of the PSD with a Hanning window applied.

  The experience above indicated to me that a manual setting of the PSD output for the function of window was necessary, however, I repeated the above experiment using random vibration data and does not clear 1.5 x factor.  I have also been informed by his colleagues that the PSD should set for the window function.

  Thank you for your comments.

  Spectral leakage.  When you use a finished sample data from the spectrum resulting is the convolution of the spectrum of the signal as if it extended indefinitely in time with the spectrum of the window.  Even if you do not use a window function, you actually have a rectangular window the same width as the sample size.

  Draw out of the VI PSD with all style of trace to show points to the data points. Turn off Auto scale on the X axis, and expand the graph around your pic. Look at the results of different windows.  In any case, there are several values non-null.  With actual sampled data of limited duration, you will never get the idealized line spectrum.

  If summarize you the output spectral value remains close to 3.2 for all windows.

  Lynn

• Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?

  Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?  THANKS in advance

  See my response here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/macro-recording-in-Vista/ef061942-8665-4d27-9222-dcd761936386

• SRM vs Mac addresses in the Site of the Protection

  Hi people,

  Quick question: we have a virtual machine that uses the Mac address of the network card for a software license application. If we test or invoke a Recovery Plan, are there opportunities that can change the Mac address of this virtual machine? This takes place in the VMX configuration file, so I guess it won't? I want to just make sure before make us a test failover for a client this Saturday.

  Thank you

  Mike

  the MAC address will not change.

  The VMX file is replicated to the recovery site and the virtual machine uses the same VMX file that he used on the protected site.

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!