Adesso 12000 USB graphic tablet became glitch.

Similar Questions

• BSOD when you try to use a graphics tablet

  Hey everybody.
  I recently bought an Amzdeal® 8.0 "x6.0" Ugee-M860 USB graphic tablet pen so I can start to learn how to do the graphic design on the computer. " The instillation of the pilot program went smoothly and without any problems. I plugged in the Tablet and it worked fine for about 10 seconds, and then the BSOD appeared. I do not know what is causing my computer to crash because there is no real hardware/software required for use of the Tablet just a normal OS system (such as windows 7, Vista, 8, ect). If it's a driver problem you think something like Driver Reviver help to fix?

  I know there is only so much software update you can do before it becomes a problem to upgrade hardware, but full of hope, is not the case.

  Here is a link to the .dmp
  https://onedrive.live.com/redir?resi...BAF11100%21110

  Dxdiag file
  https://onedrive.live.com/redir?resi...BAF11100%21112

  Any help will be greatly appreciated!

  ~ Erethos

  The error points to the PTSimBus.sys and the PTSimHid.sys that seem to be drivers for the Tablet:

  BugCheck D1, {8d1300ce, 2, 8, 8d1300ce}

  Failed to load image \SystemRoot\system32\DRIVERS\PTSimBus.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for PTSimBus.sys
  ERROR: Module load completed but symbols can be loaded for PTSimBus.sys
  WARNING: Unable to verify timestamp for PTSimHid.sys
  ERROR: Module load completed but symbols can be loaded for PTSimHid.sys
  Probably caused by: PTSimBus.sys ( PTSimBus + 50 c )

  The PTSimBus.sys that seem to cause the error is dated June 7, 2007, and you should be able to update this driver by installing the Vista driver for the M860 from the following link:

  http://ugee.NET/Download.asp

  In addition, driver verifier seems to be activated and must be disabled under normal circumstances.

  To turn off Driver Verifier:

  Windows key + R > type verifier.exe is the "Open" box > Ok > delete existing settings > finish

• After the upgrade to Windows 8, "Life of Kanvus 106 graphics tablet" does not work in Windows 8.

  Original title: Life Kanvus 106 Graphics Tablet & Windows 8

  My Tablet worked fine on two screens under Windows 7 64-bit and upgrade to Windows 8 showed not as incompatible on the implementation of control.

  The manufacturer (Kanvus) says he didn't intend to write Windows 8 drivers for this product.

  Just wondering if there was a solution to this...

  Thank you

  I just the Kanvus artist 127 and I had the same problem.

  After a bit of diagnostics and Googling a bit, I managed to solve the problem by installing the drivers of Genius.
  • In Device Manager, view by connection and find the USB device.
  • Right click and select Properties
  • Under details, select hardware ID from the dropdown property.
  • Look for the first part of the ID (right click and copy). Mine is USB\VID_172F & PID_0500
  • You should find a device that matches.
  • I found most of the devices Kanvus is also obtained by genius.
  • You can try to go directly to http://www.geniusnet.com/wSite/lp?ctNode=174&CtUnit=156&BaseDSD=10&mp=1 and look around. The devices look pretty similar, just different colors.
  • Most of the devices have drivers Windows 8 produced by genius and they work wonderfully for me. All features are supported, as well as a few that Kanvus didn't.

  My unit is the equivalent of G - Pen M712X. The device ID's match so that the drivers install without any problems.

  Don't forget to uninstall the existing drivers. I would suggest disconnect your Tablet once drivers are uninstalled and viewing devices hidden in Device Manager, and then deleting the remains.
  Once you're done, install the drivers of genius as usual by installing everything first and then connect the tablet.
  If all goes well, you should be running.
  The drivers work fine for everything I tried so far, including Photoshop and GIMP.
  It may be useful

• are the graphics tablet specific brand replacement styli?

  are the graphics tablet specific brand replacement styli?

  Check the manufaturers Web sites.

• Why not Windows log download when I installed my graphics tablet?

  On my version of Windows 7's Home Premium, I have installed my Wacom graphics tablet in my computer and downloaded Windows Windows Journal (which I use a lot for my College Algebra class. Works fine)

  I bought a new laptop with Windows 7 Ultimate installed my tablet, but the newspaper didn't upload. It was the Journal Viewer. It was not until in the algebra class trying to write something down with my graphics tablet on the computer I noticed that she was not working. I tried to open it and use my mathematical models to take color and pressure sensitive notes.

  I have OneNote 2010, but prefer Windows Journal because I can move more quickly between colors and highlighters and set the pressure change notes that more quickly compare the steps more that I have to spend to do the same thing on OneNote (I use OneNote to all my other classes, however).

  Is a problem on the part of Windows or something else going on? I really like to use Windows Journal and wishes to continue to use it on my new laptop.

  I have a HP Envy 17, if this could be a problem as well.

  Thank you for your help.

  David Dixon

  On my version of Windows 7's Home Premium, I have installed my Wacom graphics tablet in my computer and downloaded Windows Windows Journal (which I use a lot for my College Algebra class. Works fine)

  I bought a new laptop with Windows 7 Ultimate installed my tablet, but the newspaper didn't upload. It was the Journal Viewer. It was not until in the algebra class trying to write something down with my graphics tablet on the computer I noticed that she was not working. I tried to open it and use my mathematical models to take color and pressure sensitive notes.

  I have OneNote 2010, but prefer Windows Journal because I can move more quickly between colors and highlighters and set the pressure change notes that more quickly compare the steps more that I have to spend to do the same thing on OneNote (I use OneNote to all my other classes, however).

  Is a problem on the part of Windows or something else going on? I really like to use Windows Journal and wishes to continue to use it on my new laptop.

  I have a HP Envy 17, if this could be a problem as well.

  Thank you for your help.

  David Dixon

  It may ask for the Windows Installer disk to do the following, so make sure that you have a practice before deleting anything...

  Go to Panel of--> programs and features, and then select "Turn Windows has or not.   In the list, there should be an item called "Tablet PC components".  See if it is checked.

  Uncheck the item called "Tablet PC components", that allows to uninstall everything about it.  Reset.

  Back to the same place and check the element called "Tablet PC components" to install.  Reset.

  Not better?

• Driver for graphic tablet

  Graphics tablet G6 NISIS worked with Windows XP.

  I have now Windows 7 (64 bit) - can I get a driver anywhere?

  From your hardware manufacturer, if available

• Application of wet paint - Compatible graphics tablet

  I just hooked up a Wacom Intuos (medium) Creative Pen & Touch Tablet and downloaded the software up to date for Windows 8

  I get very little reaction from the pen when using oil / watercolor brushes on the App.
  Deposit of low color on the screen.
  Is there a setting that can be done in the properties of the pen.
  I tried all, but it makes no difference.
  I'm going to send this back tomorrow
  The Wacom technology assistant I've talked before buying, assured me it was compatible.
  Does anyone know of graphics tablet that works properly with the application of fresh paint?

  Hello

  The problem with the Wacom Intuos has proved to be the default setting of pressure on the pen.
  Far from severe to brush oil & Pastel tools on the application of fresh paint.
  Finally managed to diagnose by accessing the properties and Pen Soft / Hard adjustment.
  Ultimately, error.
  What would be useful with the product, it's a how-to!
  Thanks for responding

• What features of the Wacom Bamboo Touch Graphics Tablet TTC gesture - 460 supports in Windows 8?

  Original title: Wacom Bamboo Touch Graphics Tablet CTT-460

  What don't the graphics tablet Touch of Wacom Bamboo CTT-460support gesture features striking swipe for charms bars namely Windows 8, or is it more like a glorified Multi Touch touchpad?

  Roland

  Hi Roland,

  Since you want to know about the features of gesture than Wacom Bamboo Touch Graphics Tablet CTT-460support in Windows 8, you can get in touch with Wacom taken in charge to check the product manual for further assistance.

  For more information, see the article:

  Wacom FAQ

  Wacom community

  See also the article:

  Touchscreen and stylus parameters: FAQ

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Why my does ' t Brush tool works with the pressure of my graphics tablet?

  Sorry for my bad English but I'm Italian. Whe I open Illustrator ed I should use the brush of my graphics tablet, it got me the pressure in the line I draw. I have this tablet: http://www.trust.com/it/product/15356-stylus-design-tablet

  The version of Adobe Illustrator is CC, 2013

  Install a driver from Wacom also any driver, you already have. It should be an engine for a tablet that corresponds in terms of features.

  There is a hack that works for most people. He may or pourrait or works for you. Please report if it works for you.

• Adobe Illustrator - graphics tablet

  Hi, I'm new to Adobe and take class with Illustrator and other programs at the College. As a mode of major design, I probably will use these programs a lot in the future and wanted to buy a graphics tablet for use with my mac. I looked at Wacom tablets, but they all come with the software. My questions are:

  If I buy one of the tablets of Wacom, I can use it with the Adobe software, or can I only use with the supplied software?

  What other tablets that you would recommend?

  Thank you

  E

  Wacom products are compatible with all products Adobe especially with Adobe Illustrator and Adobe Photoshop.

  Brushes in Illustrator are pressure sensitive. All the brushes in Photoshop are pressure sensitive.

  After you have installed the Wacom driver, you can go to the preference of the driver and download the required software! works perfectly, I can't use Adobe with a Tablet!

  Chana

• How can I set up my graphics tablet?

  I'm new to Flash, and I tried to use free programs for my animation, but without success, so I just downloaded the free 30 day trial of flash to see if she will give me what I need. I downloaded it today (from the publication of this topic), it should be the latest version.

  I would like to have a traditional touch to my animations require a tablet with pressure sensitivity. I looked everywhere and I can't find how to set up at the start of my tablet in Flash. Usually there is a "input devices" Panel for programs compatible with a graphics tablet, but I can't find that here.

  I am running Windows 8.1 and my tablet is a Tablet Monoprice 5 x 8 "(un rebaptisée Huion H58L, qui utilise le logiciel de pilote H58L)."

  Sorry if this is obvious, and I missed it somehow. I googled this and looked in the forums. I only found answers for Photoshop and Illustrator, but not for Flash.

  I've never used tablets Wacom with Flash. Once installed (including the tablet drivers) there is little or no configuration inside Flash other than to turn on the pressure sensitivity button by selecting the Brush tool and look for the sensitivity of Subselection button in the toolbar under the Brush tool icon. Other adjustments to the way that the works of the Tablet is done using the software supplied with the drivers for the tablet itself.

• Drawing with a graphics tablet in Flash

  

  Hey community!

  I recently received the latest version of Flash and wanted to do a little drawing with my graphics tablet, but every time I try to draw a line by hand, using the pencil tool or a brush, and then for some reason, he traces a straight line leading to the bottom left of the screen, and I don't know why it does this.

  When I use the tablet to draw in Photoshop, then it works quite well, but not in Flash

  Any help will be great!

  Thank you

  Hello

  This problem has been resolved internally and difficulty for this will be available with the next release of Flash Pro CC.

  Thank you

  Sangeeta

• Intuous5 graphics tablet and PS CS6

  Hi, I got this medium graphics tablet Intuous5 yesterday. I use PS CS6 x 32 and x 64. When I use it to draw lines with less spacing between the two, I get this line connected.

  a line connecting the departure of the two lines of succesesive. 2Installez is disabled.

  

  !!! Also note the lines on the Handwritting.

  Does anyone have a solution to this problem?

  I installed the latest drivers for Tablet Wacom Intuous5 medium and even my Nvidia GeForce GT 525 M.

  Here's my laptop Specs: -.

  Dell XPS L511Z

  Intel Core i5 - 2450M @2.50 GHz

  4 GB OF RAM

  64 bit OS

  Win 7 Home Premium

  NVIDIA GeForce GT 525M 2 GB

  1 TB HARD DRIVE

  Thanks in advance...

  It may also have to do with the configuration of your machine here is CS6 recommendation and where my machine fits. Also, I won't say that I got extra strokes. I've seen a few.  Artest, not me...

  

  

• Graphics tablet in Flash CC tools

  I have a graphics tablet "Bamboo Fun" and additional tools work on Flash CC for example pressure sensitive brush e.t.c. is there a way to fix this? Or is it just bamboo in need of an update?

  Hi Sangeeta,

  Those are good suggestions, but I got all the bases covered. However, as I have pointed out this problem, the options of pressure and tilt brush mysteriously started working - without input from me I chalked it up to sunspots.

• Problems installing Trust TB-4200 (tb 1200 v2) graphic tablet drivers on win 7 ultimate x 32

  Hi, I have just upgraded to Windows 7 ultimate edition x 32 and have tried to install my tablet, Trust TB 4200 graphics for use in graphics programs.

  I ran windows update, removed all the old drivers for the Tablet, downloaded the new windows 7 x 32 driver from the manufacturers website and installed it according to their instructions.

  However, after re-booting and plug my tablet, Windows 7 incorrectly states the 4200 TB as "tablet" and installs a new driver TECHNOLOGY and several pilots "HID compatible device" instead of using the Trust TB-4200 driver (tb 1200 v2) I just installed.

  It would not be a problem if not for the fact that I need be able to use the sensitivity of pressure that are not supported by the drivers win 7 seems determined to use.

  I know the correct driver installed somewhere because when I turn on the pc with the Tablet attached to the Tablet Manager takes over, however there is no pressure sensitivity and check in the Panel shows me that the device uses the TECHNOLOGY driver.

  I contacted the Helpdesk of confidence, but so far, they have not been very helpful. Is there a way you might be able to help me with this problem on the Windows of the things end?

  Thanks for your time - harold harcourt.

  Thanks for your reply Gokul.

  I tried method 1.

  I removed the drivers manually via the control panel and ran msicuu2 then restarted and tried a clean install as an administrator.

  This time windows installed a pilot of the generic usb interface instead of the driver of tablet pen TECHNOLOGY. He brought back the pressure sensitivity options in the trust tablet Manager, unfortunately resulted in the pen with 2 pointers moving at different speeds and crashed in windows Explorer.

  I uninstalled the drivers and tried again, the second attempt brought the TECHNOLOGY drivers, but the pressure sensitivity disappeared again.

  Method 2 does not work as the Tablet displays only as "tablet" in the Device Manager and when I search or browse my system for the drivers, nothing presents itself (I think it has something to do with all of the installation files of the trust in .exe files with no way to get directly to pilots that they content).

  I got an answer of confidence this morning and they said that the TECHNOLOGY drivers are the right drivers for the chipset of the Tablet and I am currently waiting to hear if pressure sensitivity was withdrawn from their intentionally or if something has gone wrong.

  I'll post an update here when I find it to be.

  Thanks again - harold harcourt