ADF BC: What is maxpassivationstacksize parameter?

Similar Questions

• What is the parameter to open WMP directly in "media library"?

  WMP 9 on Win XP

  I can't upgrade machine company

  What is the parameter to open WMP directly in "media library".

  "C:\Program Files\Windows Media Player\wmplayer.exe" /?

  Seek and you shall find

  Found:

  / Task MediaLibrary

• ADF Mobile: What is the AmxAccessorIteratorBinding line item?

  I can get the iterator, but the methods give no idea.
  
  What I'll throw it AmxAccessorIteratorBinding.getCurrentRow or BasicIterator.getCurrentRow?
  
  None Returns a specific type, all are subject.
  
  When I capture in propertyListener, it's the same...
  
  < amx:setPropertyListener from = "#{bindings.srvIterator.currentRow} '"
  to = "#{pageFlowScope.CurrentRow}" type = "action" / > "
  
  Any ideas? What is the exact type of throw a line item?

  I'm not 100%, I understand your problem, but that's what you're looking for?
  http://adf4beginners.blogspot.be/2013/01/ADF-mobile-how-to-iterate-over-all-rows.html

• What is a "parameter of waveform dt &lt; = 0' error?"

  I need to follow a signal square using a PXI-6221. Currently I use it to take a waveform of 500000-sample, which is then sent to "Extract information your unique" to find the frequency. The frequency is then written into a spreadsheet file.

  Initially, I used this VI with the PXI-6221 in a PXI-1000 b with a PXI - 8156B controller. The VI I had written to perform the above tasks has been saved as a LV 7.1 executable. There is no error while running VI and the frequency of approximately 3 kHz was estimated to about 20 Hz. Then, I decided to use the exact same VI and map in an SMU-1065 chassis using a MXI-Express for PC bridge. Of the shot, if I used a LV 7.1 exe or even VI saved under 8.6, 8.0, or 7.1, it gave me the same error whenever the VI reached the point where it had to assess the frequency of the signal: ' dt waveform parameter<>

  -PXI - 8156B is a processor 233 MHz running under Win.NT.

  -The PC is a relatively new model running on Win XP.

  -When I access the PXI-6221 test panel and manually run the test, I see a set of square waves appear on the chart as expected.

  -L' exact same error when I replace it with a PXI-6259 for PXI-6221.

  -The voltage of the signal moves between-5 and 0 V.

  -When an analysis of different frequency VI is used the same problem occurs.

  You have no frequency clock value.  When your VI runs, the waveform in the half superior as a dt value of zero.

• What undo_tablespace initialization parameter?

  I mean, why this parameter is placed in the pfile or spfile? because the undo tablespace belongs to the database instead of the instance, why not put this info in the control file?

  The Undo Tablespace is bound to the Instance. To the CARS, the settings file to identify the Undo Tablespace for each Instance.  A 4 CARS with 4 instances node will be so 4 undo tablespace active.

  Hemant K Collette

• What is compress = parameter y exp?

  Hi all
  
  Can anyone shed light on compress = parameter to y. Is it really compresses the backup?

  The value default, COMPRESS = y, causes export table data to the Pavilion for the grouping in an initial measure during the import. If the extent sizes are large (for example, given the PCTINCREASE parameter), the allocated space will be larger than the space needed to store the data.

  If you specify COMPRESS = n, export uses the current settings of storage, including the values of the size of the initial step and next step. The values of the parameters may be the values specified in CREATE TABLE or ALTER TABLE statements, or the values changed by the database system. For example, the value size measurement to address NEXT can be modified if the table grows and the PCTINCREASE parameter is nonzero

  In analogy,.
  Why you want to have all the books in the first tablet itself.
  When it's OK to spread evenly across of all the shelves?
  You want to save space?
  Have you seen that in order to have all the books is the first Tablet
  balooned OR grown in the fat.
  before in the same place there is to say... 5 shelves. you have now 2 shelves
  Furthermore, you haven't saved any space (General Ledger cash)? N °

  intead now you have a large INTIAL shelf.
  (above is just for example. Do NOT INTREPRIT these literally).

  w.r.to oracle
  Oracle calulates space currently allocated and used as size
  the initial measurement of the object target.
  consider
  originally initial = 10 m = 5 m minextents = 6 next.
  the segment size = 10 + (5 * 5) = 35 m
  you export it with compress = y.
  import it.
  all extensions are merged into one.
  you will see that,
  initial = 35, next = 5 and minextents = 6.
  segmentsize = 35 + (5 * 5) = 60 m
  Now probably your import may fail, you cannot limit a segment of 60 m.

• What is the parameter to specify on the command line for thunderbird automatically send email.

  I do apply to using macros Calc and precise automatically send emails, I know it's possible, to inform the parameters through a command line, but Thunderbird does not send automatically receives them, only the parameters, fill in the fields, but the send command are required manually.

  Thunderbird does not authorize this transmission stripped.

• What capabilities that I lose in JDeveloper by using only no ADF?

  What capabilities that I lose in JDeveloper by using only no ADF?

  Do you mean everytime I bind, for example, a command button JSF to a JSP page using drag-and-drop features who will code the ADF on my project.

  Lol you can always drag elements from the palette of JSF components in your JSF Visual editor - it doesn't use ADF.
  What I wanted, it was doing drag the control data from the data control palette and dropping them on the JSF page - what is binding of ADF.

  ADF BC offers a lot of out of the box to work with the database feature. Things like master-detail, synchronization, LOVs, calculated fields, query components etc.
  However if you want to use pure Java EE you can use JPA/EJB position.

• What is Oracle ADF?

  Hello.
  What is Oracle Application Development Framework (Oracle ADF)?
  What is development tools?
  What is the version the lowest required for Oracle ADF oracle application?

  Hello

  What is Oracle Application Development Framework (Oracle ADF)?

  Oracle ADF is a Java EE-to-end framework that simplifies development by providing the box infrastructure services and a Visual and declarative development experience.

  Oracle Application Development Framework
  http://www.Oracle.com/technology/products/ADF/index.html

  Oracle Application Development Framework
  http://en.Wikipedia.org/wiki/Oracle_Application_Development_Framework

  Oracle ADF Faces components rich clients
  http://www.Oracle.com/technology/products/ADF/adffaces/index.html

  What is development tools?

  Oracle JDeveloper.

  What is the version the lowest required for Oracle ADF oracle application?

  Refer to:

  Note: 563047.1 - using Oracle Application Framework (OAF) and development of Application (ADF) framework
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=563047.1

  Kind regards
  Hussein

• Set the string for LabView dll parameter

  Hello

  I created a simple vi LV 2010 (departure vi), which reads the identification of an oscilloscope. Then I take this vi and incorporate it into a dll of LabView. I have test the dll calling LabView (RunFrom dll). Basically, it seems to work, but len and ReadBuffer back empty. It must be in the way I'm configuration configuring the setting for Readbuffer (settings) in the configuration of the dll. I tried several different configurations, but nothing seems to work. Any help is appreciated!

  What is the parameter len?  Normally, you should only set the length of the string, but it seems that you did not do this.  Also, you're passing len by value, and not by reference, so the function is expecting her to be a starter and you will never get return a different value to any value that you provide.

  Do not use a local variable of the ReadBuffer for entry "readbuffer".  You must pass a string initialized long enough to contain the expected quantity of data.  The best way to proceed is to use the array to initialize to create a table of U8, then use the array of bytes to a string.  Set the parameter 'minimum size' to 'len' then run through the length of the string initialized (this is not mandatory but is recommended).  If you need the length obtained output, add another indicator and another parameter to this value.  There might be a way to do it with one by len parameter passing by reference, you need to experiment (it is certainly feasible in C but I don't know if allows him to LabVIEW).

• What is the real difference between the card and the ORDER of the member functions?

  Hi all

  According to the documentation http://docs.oracle.com/cd/B28359_01/appdev.111/b28371/adobjbas.htm#CHDFGJFB

  Control methods make comparisons of direct one-to-one object. Unlike the methods of the card, they cannot determine the agenda of a number of objects. They simply tell you that the current object is equal or less than the object that it is being compared, based on the criterion used.

  A method of control is a function of an object ( SELF ), with a declared parameter that is an object of the same type. The method should return a negative number, zero, or a positive number. This value means that the object (the implied no said SELF parameter) is less than, equal, or greater than the declared parameter object.

  I still can't find all the differences between them. Because the documentation said that makle methods to ORDER one to an object comparisons. However, you can also do it with the map member function the (as illustrated below). Can someone clarify this please?

  create rectangular type is object
  (
  number of width,
  number of height,
  Order member function camparison (r rectangular) return number
  );

  create or replace type rectangular body is
  order member function camparison (r rectangular)
  Return number
  is
  Start
  If (self.width + self.height) > (r.width and r.height) then
  Return 1;
  elsif (self.width + self.height) < (r.width and r.height) then
  Returns - 1;
  on the other
  return 0;
  end if;
  end;
  end;

  OR

  create or replace the rectangular type is object
  (
  number of width,
  number of height,
  card camparison return number of member function
  );

  create or replace type rectangular body is
  map member function camparison
  Return number

  
  is
  Start
  Return self.width + self.height;
  end;
  end;

  For the two I use the following block of code right? So, what is the difference?

  Set serveroutput on;
  declare
  rectangular rect1;
  rectangular rect2;
  Start

  rect1: rectangular = (3, 5);
  rect2: rectangular = (4, 8);

  If rect1 > rect2 then
  dbms_output.put_line ('rect1 Büyük');
  on the other
  dbms_output.put_line ('Büyük rect2');
  end if;

  end;

  My 2nd question is: in the function member order what is the parameter reference? When we compared how it corresponds to?

  camparison of Member (rectangular r) function order

  When comparing the two objects is the function parameter is the object of the comparison sign right?

  If rect1 > rect2 then

  Thanks in advance

  Order compare 2 objects.

  Card returns a value that can be used to control any number of objects.

• bacward compatibility tag DVT overview to provide zoom and scroll features in the graphics of the adf

  ADF 12 c media features presentation in graphs, which allows the user to zoom and scroll in the chart and little more than features. Andrejus Baranovskis Blog: ADF 12 c (12.1.3) line graph preview function

  Can any one subject comfirm it's backward compatibility, what is the minimum version of the ADF, these features may be supported?

  If only 12 c supports this then any other way to get these features in older versions of the ADF and what might be the minimum version to get these features.

  All documentation around this would be a great help.

  Thank you

  Abdou

  This featrue was introduced in 12.1.3 and has been backported to 11.1.1.9.0 as shown in the new features of Oracle JDeveloper 11.1.1.9 lately. You must use this version to achieve this functionality.

  I don't think you can ask a backport to another version that the feature is available in the latest version of 11g and 12 c.

  Timo

• Reading Message parameters in the application of the ADF

  Hello world

  I have a little problem with reading the parameters of publication in my application of ADF. This is the scenario:

  External site redirects to my site, including the publication settings. Something like this:

  < form action ="""http://somesite.com/mysite/faces/LandingPage.jspx""">

  < entry type ='hidden' name ="firstname" value ='Mickey'>

  < entry type ='hidden' name ="lastname" value ='Mouse'>

  < entry type ="submit" value ="Submit">

  < /Form >

  
  

  
  

  Now, I would like to know how to read the settings on my end in the back of the page bean.

  Any help is appreciated.

  
  

  
  

  
  

  Thank you
  

  Check out this post ADF: method using POST pass parameter to the base ADF web application

  And http://adfpractice-fedor.blogspot.de/2013/07/url-task-flow-call-with-http-post-method.html

  Timo

• ADF Jazn security

  Hello

  I use JDev 11.1.2.4, I create a security login using jazn-"Data.xml" JDeveloper Application menu > Secure > configure the ADF security, what I need to know once I added (application roles, users, and grant resources) how can I deploy at production weblogic and if I need to add a new user and give him a role where I can do? WebLogic?

  ADF security grants permissions to application roles. Application roles are mapped to business roles from Enterprise Manager who gets them normally for example an ldap.

  http://download.Oracle.com/otn_hosted_doc/JDeveloper/11gdemos/adf_security1/adf_security1.html

  http://download.Oracle.com/otn_hosted_doc/JDeveloper/11gdemos/adf_security2/adf_security2.html

  If you are deploying to production users created in the jazn file are not created on the srever for security reasons. The administrator must grant the business roles for users using EM or any other tool. The app of the ADF works only with applications roles.

  Andrejus Baranovskis Blog: Management of security permissions to ADF using Oracle Enterprise Manager 11 g

  and https://www.youtube.com/watch?v=smJTDoryXA8 & feature = plcp

  should help you get started.

  Timo

• parameter 'installVector' in HKCU\Software\Macromedia\FlashPlayer\FlashPlayerVersion

  Hello!

  I find interesting feature (?): flash drive in brunch of the HKCU\Software\Macromedia\FlashPlayer\ register in the field FlashPlayerVersion gave ' 18.0.0.209 ~ installVector = 2.

  My fries has ' 18.0.0.209 ~ installVector = 1 ". I google it and I saw " 18.0.0.209 ~ installVector = 8 "

  Please, can you explain to me what it means parameter 'installVector'?

  HI jennyl4944394,

  This parameter is simply the installation method used to install Flash Player.

  If the record in your post output is correct, you have an old version, no guarantee of Flash Player installed.  There is a certain releases since 18.0.0.209 was released. It is recommended to upgrade to the newer, more secure, version 19.0.0.226.

  --

  Maria