ADF is required to use the tools to connect to the base?

Similar Questions

• Configuration required to use the fingerprint reader

  I have a dv6tQE delivered later this week and I'm looking into how to configure the fingerprint reader.  I'm interested the FR for projecting my fingerprint with the plethora of passwords that I now keep in a Word document hyperlink.  Too much memorize.  I'm not interested in the security feature that requires a logon or a fingerprint whenever I start my computer.  I usually push on the button and then perform several tasks to something else and come back to the computer, wait until it is ready to roll without the need for an additional activity on my part.

  The User Guide PDF downloaded States in part:

  "In order to use the fingerprint reader, you must configure a user account with a password on the computer. This account allows you to log on to your computer with a simple touch of the designated finger. Alternatively, you can use the fingerprint reader to fill in the password on Web sites and other programs that require a login. See using the fingerprint software for instructions. After you have created your identity from fingerprints, you can configure single sign-on... »

  It will be necessary for me to set up a user account for my login or can I skip that part and use the NOF for passwords only?  In addition, there is a link to the FR software guide?

  ---

• Libretto W100 - 10 d - What software is required to use the GPS

  Hello

  I have questions about this camera and exactly, I would like to know if it is possible install the libretto W100 - 10 d special SW using the potential installed on board.
  This model has a characteristic maps Erickson F3607 model to use this device as the 3G network and also has GPS but I don't know how is SW right to use the card as Garmin, Tom Tom or other.

  Thank you very much

  Hey Buddy,

  To be honest I never heard that it of possible to use a GPS software such as Garmin or TomTom on the Libretto W100. I Don t but Google shows no results

  I think an official response, which you get from an authorized service provider. You should contact them. Write an email or give them a call, I think that they can give you an appropriate response.

  If you find something, please post it here. It would be interesting. :)

• Using the base station airport ONLY as a backup, but is not a router

  Hi, I have a simple question that I can't find an answer. I want to use my Airport only base like a time capsule, and not as a wifi hotspot. I'm in a wfi environment that does not have any router, my wifi just to join a wireless network in my office environment. Previously, I worked in an office where I ran a cable DHCP in my airport base station and then he joined with wifi. Now, I just want to use the airport as a backup. Answers to this question involve disable wifi from the airport and hit an ethernet cable from the router to the airport base station. I do not have a router. So is it possible that I can get the device from the airport, make back ups wireless, all at the same time be connected to a wireless network? I'm guessing that the answer is no.

  Unfortunately, your proposal of "no" is correct.

  However, you could configure the airport Time Capsule (ATC) to create a wireless network (without Internet access) and save on the Time Capsule wireless.

  Of course, to do this, when you want to save, you need to log on to your 'normal' wireless network and connect wireless provided by ATC.  Once the backup is complete, then you'll need to sign the CTA wireless and log on to your normal wireless network.

  All things considered, it would be much easier to invest in a USB low price and connect the HDD directly on your Mac. In this way, you can stay connected to your wireless network normal and backups occur automatically.

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• Re: Cannot run programms that requires OpenGL using the Satellite L

  I have a Toshiba laptop with ATI Radeon 4650, but cannot run programms that requires OpenGL.
  I can't install the new ATI driver on their homepage, because they are not compatible with the Toshibaproducts.

  I also can't update the driver from Toshiba, because their driver ATI latest is since March 2009.
  I already have googeld problem, but can't find it.

  Please guys, someone knows a solution to this annoying problem?

  > I can't install the new ATI driver on their homepage, because they are not compatible with the Toshibaproducts.

  Because ati - driver must be changed to support, protection against overheating.

  > I also can't update the driver from Toshiba, because their driver ATI latest is since March 2009.

  Yes, it may take quite a long time when Toshiba released updated Gpu driver

• What device drivers OR are required to use the configurator with CompactRIO Profibus Master-Slave device?

  I'm trying to deploy the software driver for a portable production that will allow technicians to download configurations of profibus for CompactRIO profibus DP master-slave cards.  I know I need support VISA and MAX in order to communicate with the device when it is in Slot 1.

  I have a Windows XP computer I've used in the past for this and a 7 32-bit Windows development machine that can do as well.  I guess I would need OR-Rio installed and more MAX and VISA, but I run in RIO the right software to install on this machine.  Until I dig a hole more far than necessary can someone point me in the right direction of what is needed to install?

  My development platform is LabVIEW 2010 with SP1.  The development and the production laptop computer work all the two 32-bit Windows 7.  The development machine has the following (and other) software:

  LabVIEW 2010 (RT, FPGA modules) SP1

  MAX 5.3.3

  NI-VISA 5.2

  NOR-RIO 3.6

  We use Comsoft Configurator II 1.2.37

  All reviews are much appreciated!

  Matt,

  I understand the suggestion about Profibus shake appeal reviewer, but I never mentioned the module Profibus - only the NI Compact RIO driver software.

  Ryan,

  I checked that the key and it is present and correct.  Later during some additional tests, I'm done with several other installers throw similar messages.  I've seen CVIRTEDIR and MAXAFWDIR as well.

  I thought at this stage there was another really obscure registry entry who standing things upwards, so I tried to install it (s) even on another unit of the same configuration management.  Installed LabVIEW Runtime Engine 2010 SP1f5, NI-VISA 5.2 (included OR MAX 5.3) and NOR-RIO 3.6.1 and everything works well for use with Configurator II Version 1.2 (September 2011 version 1.09 interface Comsoft TCP sockets, includes LabVIEW 8.6 run time engine).

  In the past I could have resorted to the use of MSI-Blast to clean all the related registry NOR entered, but I couldn't get my hands on a copy and uninstall NOR has not removed the remains (it seems).

  Jason

• ADF: Session timeout problem using the JavaScript window.open() method

  Hi all
  
  I have a commandImageLink on my page, with partialSubmit = true, clientComponent = true. ClientListener the link calls a JavaScript onClick, the fire with a clientAttribute that contains the URL for the managed bean.
  It works very well - the new window opens successfully. But the performance of any activity on the parent window, the session expires immediately.
  
  The ciLink aims to open the URL in a new window and I can not change this feature.
  
  I've tried (and failed)-
  1. put the ciLink within the tag < h:form > and using target = "_blank".
  2 actionListener on ciLink to JavaScript fire.
  
  I use JDeveloper 11.1.2.1 with weblogic 10.3.6, JSF 2.0.
  
  Thank you
  Yacoub

  Hi Anirban,

  Try to change the session cookie in weblogic.xml, seems to be cleaned each time that you access the external link:

  
    JSESSIONID-MYAPPLICATION
  
  

  AP

• Newbie: What version of WL is required to use the experimental WL plugins?

  I managed 10.3.5 installed and connected on jrockit r28, but get with 10.3.2 on r28. The WLDFDiagnosticVolume property is not available on the managed nodes, for example. I am able to connect to 10.3.2 and see the JRockit JMX counters very well, but I'm looking for WebLogic JDBC WLDF counters in particular. They are not there. Is there a workaround for different versions of WL?
  
  And for kickers, my installation of Mission JR control seems to have developed some bits of rust, too. I was able to run "Help\Install Plug-ins.... (Not supported) "once and installed all sorts of things. Now, however, it will not work. He complains, he does not feature on the selected site and told me to choose another.
  
  Thank you for any advice, including links to work to help the docs. :-)

  WLDFDiagnosticVolume is available from WLS10.3.3, this is the reason why you can't find this property in WLS10.3.2
  We have not all similar to WLS10.3.2 properties as JFR (registration of flight JRockit) is not integrated into the framework of WebLogic WLDF before WLS10.3.2
  The property and features that use this property are all only introduced in WLS10.3.3, that is, this property is a similar property will not help (don't not mandatory) in WLS10.3.2 like no collection will use

  In addition, in order to use JRockitR28.0 for versions older than WLS10.3.3, that is, WLS10.3.2, WLS9.2MP4, etc., we would need to apply patch #9884941
  Please do understand that this patch is only to fix some known issues with JRockitR28 only product WLS. This patch will not present the features of integration with JFR WLDF (WLDFDiagnosticVolume still is not available with this patch). Integration with JFR WLDF is a new feature that is available from WLS10.3.3.
  Once again, it is only necessary if you want to run using JRockitR28.x WLS10.3.2

  About plug-ins, I have personally not tried.
  But it seems that you have installed all the plug-ins that were available on the test site. I think that you are not any other plug-ins that are available for to install you.

  Arun

• How can I use a custom tool easy to machine the same LabVIEW is the basis on average DC - RMS VI

  I use a cRio 9024 and read PWM with an analog input card 9205.  It was suggested that I use the basis on average DC - RMS VI to convert the voltage of the PWM signal into an analog signal (effective value) for use in my system.  The problem is that the 9024 can use LabVIEW models (it's VxWorks). I work through the device a custom tool easy and I wonder if someone can guide me in the right direction.

  I am running Veristand 2014, cRio-9024, 6modules, and run the scan engine.  It seems that's the reason why I can't read analog voltage (starting a PWM signal) since the signal is running at 200 Hz and the Scan Engine runs at 500 Hz.   I tried to avoid making a custom device or an FPGA and found a work around using the 9401 in counter mode.  I can get the numbers that I need, that's how I'm heading at the moment.  I would like to custom device approach, but not this sprint.

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• Homegroup in windows 7 32A printer - another PC with win7 64 bit cannot use the shared prinetr

  HP Photosmart C4680 - 1 PC running windows 7 32 bit PC 2 printer and PC 3 I running windows 7 64 bit - this unable to print.

  Special on 3 PC's VmWare workstation - virtual stand-alone created with 32-bit windows - these virtual PC has no problem help

  shared printer to PC 1.

  I have the feeling - bad driver 2 PC and PC 3, bur how do I change driver

  Hi kridres,

  Have you tried to use the base driver for Win 7 64 bits on the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-68434-4&CC=US&DLC=en&LC=en&os=4063&Product=3739150&sw_lang=

  See the following information about the printer share.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

• Using resource monitor to connect remotely to another PC

  Hello

  Is it possible to use the resource monitor in Windows 7 and 8 to connect to another Windows computer and know what is happening on it remotely? The monitor has a whole wealth of information that would be useful for troubleshooting other machines.

  Thank you very much

  vnayak

  Hi Vnayak,

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time. You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer. You cannot use this tool to connect to another machine remotely.

  
  

  However, you can use remote desktop to access other computers remotely and check the Information resource monitor.

  Consult the following link:

  http://Windows.Microsoft.com/en-in/Windows-8/Remote-Desktop-connection-frequently-asked-questions

  Hope this information helps.

• The substitution of the basis of <>url, for exceptions (how?)

  I use the < base > tag for the first time and I was wondering if there was a way - short type the complete url - to tell the browser which has a link to the specific root in the code should be ignored by the behavior.

  I guess at the end of the day, I ask if I can have my cake and eat it too. All my links are relative to the root, but I want some of them to be relative to a domain and some as compared to others.

  I'm pretty sure the complete URL is the only way to override the < base >, but I thought I'd ask just confirm.

  I think you have your answer. As far as I know, it would be the only way.

• How can I get the names of the ID attribute of the base.

  Hi assume that the attribute is "page three.xyz" whose baseid is 1234, is it possible that I can get the attribute name using the base id

  Please read the Java Docs. These are installed with the server under integration, sdk, documentation, html.

  Review the IAttribute interface and call getFullName.

  String getFullName () throws APIException

  Returns the full localized name of the attribute. A fully qualified name is a string that includes the name of the tab and name of the attribute, separated by a period, for example, "Title Block.Description."

  Returns:
  fully qualified name of the attribute

  Since:
  8.8