Adjustment of the spectrum

Hi all

With this code I am defining the spectrum (Center freq, span, RBW, video BW, sweep Time, amp). All the values of what I should automatically not manually set. But when I ran this code, I get no result req. I so want to just know my mistakes...

Thank you very much in advance...

Patricia

Advertisement

Hi all

Its working fine... Just u hv to take care of the orders...

Pals

Tags: NI Software

Similar Questions

  • The spectrum X 360 screen rotation

    Hi, I recently bought the spectrum X 360 with 10 windows, but the rotation of the screen does not work in tent and Tablet mode.

    I tried to find a solution for this in the display settings, but this display rotation Lock is enabled and disabled. So I can't even change it.

    Please let me know how to activate the screen rotation.

    Found a solution: Win + R-> type "regedit" and enter

    The Registry Editor opens.

    Goto-> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\AutoRotation path

    Check the value of the file if it is 0 rotation will be OFF, if 1 rotation will be THERE.

    Reboot and auto rotation will work.

    Note: The lock rotation in display settings button is still disabled, do not know why.

    Let me know if it helps.

  • Spectrum x 360: what SD speed class card will be the spectrum 360 HP support?

    Hi all

    I want to buy a SD card 64 GB (Class 10 SDXC and UHS I or II), but I want to be sure, it corresponds to the speed class that supports the spectrum 360 (model 2016 skylake). The manuals do not specify it.

    Thank you.

    @Boeryepes Thanks for the reply,

    I found a third-party site where they did a test on X 360 computer laptop benchmark. Please find below the results of the tests.

    Toshiba Exceria Pro SDXC 64 GB UHS - II using as reference. SD reports a read rate of 80.8 MB/s and a write speed of 59.7 Mbps.

    Please use this link for more information: http://hp.care/2cFP8bd

    Let me know if it helps.

    Have a great day!

  • How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

    How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

    I assume that you use the application overview.

    I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

    and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

    pressing Save will close the image with the changes and then move to the next image and so on.

  • Crackling while playing music in the SPECTRUM of the HP 15-4000 Ultrabook

    Crackling while playing music in the SPECTRUM of the HP 15-4000 Ultrabook. TouchSmart with beats audio win 8.1. 64 bit. The problem is gone, when to disconnect the adapter!  Update the audio driver is not the problem. any solution?

    Hi vinnieee, sorry to hear that you are having sound problems with your computer.  I know that the problem you are experiencing is faced with a crackling noise but I'll give you a document that will trouble shoot sound problems.        http://support.HP.com/us-en/document/c03257712

    I also saw that her you said when the power adapter is disconnected from the judgments of the question.  It could be a problem of land, and if that is the question, I would say that contact you HP Total care at 1-800-474-6836 for more in depth troubleshooting.  If it is outside your calling area, please click on the link to select HP in your area.        http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    Thanks in advance

  • Surveillance of the spectrum with USRP 2920

    Hello

    I see all the examples on the analysis of the spectrum

    but nothing is near my desired app cause

    as an example https://decibel.ni.com/content/docs/DOC-40721

    It uses an entry 'carrier' and then show spectrum

    I want to start and stop frequency within the bandwidth instantenous 2920 USRP

    and monitor the spectrum in the band of desierd

    I want signals to show their real carriers not baseband signal after demodulation

    Thank you

    Hello

    Can you explain a little more about your use of the application? Frequency range you want to monitor? So, can you explain why you need to "show the signals to their actual carriers and not baseband? The USRP 2920 has only 40 MHz of instantaneous bandwidth (and only 20 MHz with a resolution of 16 bits) so unless the signal of your 'real' sitting in the baseband already (i.e. below 40 MHz) you would be sewing together the spectrum required for an acquisition to wide band and he would not be instantaneous.

    Kind regards

    John Gentile

    Engineering applications

  • Adjustment of the integral of a Gaussian

    Hello

    I have LabView 2013 I'm trying to curve adjusted using the non-linear curve Lev - Mar vi but are unsure how to proceed. From what I understand, you can create a user defined model in the string, but the help files only detail a the second order polynomial of the form a1 + a2 * x + a3 * x ^ 2.

    I have the intensity of the reflection of the laser on a sample of data, and when the laser moves on the metal marker intensity increases. The metal marker has a beginning of knife edge and increase intensity moving on the marker shows Gaussian beam shape and intensity profile can be described using the integral of the Gaussian shape.

    Sorry if this problem has been posted before, but I can't see it in the forums in general pretty average I can understand as a new user. I basically want to model defined by the user of the integral of a Gaussian type and feed my data in the form (x i) and give it me the coefficients I can take the center point as the tip of the marker position.

    Thank you

    Paul.

    OK, I have a comment on the Code and comment on the data.  First, the code.  You use a 'chain of the formula', which means that you ask LabVIEW to claim that it is Matlab and can 'interpret' a channel to follow the instructions as you want.  It would surprise me a lot if it worked, especially with something other than the simple polynomials.  Since it is LabVIEW () and write a VI to calculate F(x, a) and explicitly put in the square root and the erf functions you need.

    In looking at the data, I confess that I don't know what you're trying to mount.  I see a number of pulses noisy square wave what-look-like in X and Y, there does not at the same time.  I'm guessing that you are interested in fitting something in the transition - why not seek 'big first derivatives' and she (for example), find the middle between high and low?  If you need more sophisticated features of fitting, you could at least narrow down the set of data that you send to your function of fitting to include a small subset of points surrounding the transition.

    Bob Schor

  • What gives error of request interrupted on the spectrum screen

    Hi all

    I want to make a screenshot for ESA series Spectrum Analyzer. I make a screenshot, but still not even the current. If and only if I do not use MMEMEL function after reading binary data under vi I screenshot, but not the current one. And if I use the function MMEMEL then I get blank screen capture. And on the screen of the spectrum I always get message that INTERRUPTED the query and error output, I get attention. I don't know what to do these things happened... I'll be very happy if someone help me with this...

    Thanks in advance...

    Pals

    Hi all

    The solution that I was using the wait until I changed to the delay of the watch and I sent * OPC? but don't read do not then it was in error.

    Thanks for any help...

    Pals

  • bug with the news of the spectrum

    Hello

    I have a problem with the FRF vi, which calculates the frequency response. The cluster 'info of the spectrum', the channel name is not changed when the FRF vi is looped. It seems that this problem is when the vi Polymorph selection is set to "1 stimulus, 1 reply.

    The attached vi shows my problem for a better understanding of the "bug".

    The channelname (and perhaps other properties of the spectrum) are not changed. I want to store the result of the FRF vi to a TDMS with polymorphic VI 'Write in TDMS' file available in the Toolbox for sound & Vibration. The Spectra must be registered with all of the properties and the channelname should change...

    Someone has an idea to fix this? Maybe I do not use the bandwidth as it should be, but it seems that there is a bug in the vi.

    Thanks for your help.

    Mathieu

    Hello

    I found what was wrong in my code.

    In order to have the good 'spectrum info', I put the entry "reboot on average" to true on the frequency response of vi.

    Mathieu

  • Spectrum 13-v018ca: where to find the bottom of the spectrum 13?

    Hi, I recently bought the 13-v018ca spectrum, and I was wondering if anyone knows where to find the gold background veneers used on the spectrum in promotional photos? I included a picture below.

    @Chrissy4

    Hello

    The spectrum requested HP wallpaper is attached.

    Apologize for the delay. It is not normally included with the laptop and took me a bit to find that.

  • Error on the screen of the Spectrum Analyzer "interrupt request".

    Hi all

    First of all sorry I originally posted this message in the wrong place...

    I want to make a screenshot for ESA series Spectrum Analyzer. I make a screenshot, but still not even the current. If and only if I do not use MMEMEL function after reading binary data under vi I screenshot, but not the current one. And if I use the function MMEMEL then I get blank screen capture. And on the screen of the spectrum I always get message that INTERRUPTED the query and error output, I get attention. I don't know what to do these things happened... I'll be very happy if someone help me with this...

    Thanks in advance...

    Pals

    I don't know if it's important, but the 'PSA Screen Capture via GPIB1' VI you downloaded is looking for the Subvi "VISA Read block of binary data", but you have downloaded "VISA read binary block given to file1. What is the difference?

    The reason of the error of REQUEST INTERRUPTED, is you issue one * OPC? command, but never read the answer. This command causes the parser to return a 1 after the command is completed. You never read it. Thus, the Analyzer complains, as it should.

  • My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

    Low sound volume

    My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    Method 1:

    I suggest you follow the link and check.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

    Method 2:

    I suggest to follow the link and search for the volume in the taskbar.

    (a) right click on an empty area of the taskbar and then click Properties.

    (b) in the Notification area, click Customize.

    (c) select the volume see the icons and taskbar notifications check box, and then click OK.

    I also suggest you to follow the link and check.

    Change icons appear in the notification area

    http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

  • Sampling frequency of adjustment for the analog output of sine

    Hello

    I tried to do something very simple: using an analog output card PCI 6221 to produce a frequency 50 Hz sine curve. For this I used a Vi to create a curve sinus and different screws DAQmx. But I have trouble understanding the principle of virtual channel and I think I do an error of adjustment of the sampling frequency and number of samples: once for the vi, second time sine "DAQmx - synchronization. Can I use the same values for both of these screws?

    On my oscilloscope, with frequency = 50 Hz and the sampling frequency = 1 kHz, I get a null signal. Then according to two values, I'm differently evaluated signals. For example, with f = 1 Hz and sr = 10 kHz, a frequency 0.7 Hz sinus.

    Make sure that the start for the analog input task occurs after the analog output.  By plugging in the wrong thread to an analogue output start task first, and then to the start task, you guarantee that the AI cannot start until after the startup of the AO.

  • pushing down hard on the spectrum box 13 control touchpad

    Hi all

    My question is about the touchpad on the spectrum 13 box control. I just noticed that if you press harder on the control (instead of putt) area, it will make a noise of rattling in depth.  My question is this - you're supposed to be able to push harder on the touchpad?  I just have to make sure that I am not damaging the touchpad by pressing harder on it.

    Thank you guys

    OK thanks Sparkles1! Yes, that I have no intention to bring down unreasonably hard on the touch pad at all, my question was more along the lines of confirming that 'pushing down on the touch pad as it performs a click' is a planned feature of the touchpad. Given your initial response well (i.e. "when I pressed hard on the touchpad on the spectrum 13 here, I could hear a click as"), I guess it is. In addition, while playing with my laptop a little more, I found that you can do certain things my pressing down harder on the touchpad (for example drag by selecting text), which even once leads me to believe that pushing the hardest is a planned function. Thanks for the quick responses so! It's been very appreciated thank you! Jayflip

  • Adjustment of the mist

    Why are there no adjustment of the mist in LR6 standalone version?  There is a setting of mist in PSE14 by Adobe...

    When Lightroom 6 came out, the mist filter has not been added yet. 6 Lightroom do not receive the updated functionality. If you buy the stand-alone version of Lightroom, you will receive updates to support new cameras, but there will be no new features. You will have to wait for the next update, which will be a paid upgrade, to receive the latest news. This isn't something new. In the latest have always been part of the updates and no updates. It is one of the benefits of having Lightroom CC. He will receive periodic updates because it's one of the benefits of having Lightroom CC.

    In reality, you answered your own question. 6 of Lightroom is 6 of Lightroom. Although Lightroom CC is the same program, it is allowed in a different way and has additional features. You do not additional features, if you do not get them.

Maybe you are looking for

  • delegate method calls to the members of a class

    Hello I'm new to LabView and using the 2013 version. I am familiar with the concepts of object-oriented programming. situation/goal I have a controller that controls axes. The controller said communication happens via plain text messages. I want to c

  • Problem with low disk space

    I get a disk space warning low all the morning. I went and cleaned the files that came in the box, but still having a problem. At least I have start deleting programs I use, I don't see where to get more 'space '. Thank you in advance. ~ mtntown PS a

  • Built in mic doesn't work anymore since reformatting my laptop

    Original title; problem with the microphone I reformatted my computer dell inspiron 1520, which uses vista - and the microphone is no longer detected by computer - ideas please?

  • BlackBerry Z30 send text SMS to multiple recipients (more than 5)

    How can I send an sms text message to more than 5 recipients? As soon as I add 5 or more contacts in ' to: ' it switches to an mms message.  I need to send mass sms text to warn people I changed my phone #, but I know some people may not receive MMS

  • How to view a php file in blackberry webwork?

    Hi all I have a php file called about_us.php that contain static text, how to contact us in my room, in my blackberry application, I have a menu called are we too, my question is, how can I display the text on about_us.php when user choose us menu on