Admin default device (Ganymede +)

Similar Questions

• Default device in the Simulator

  Hi guys

  Is it possible to set the default device Simulator? I always want to turn into one of those more peripheral NOT. All except 6 + and 6 s +.
  It is annoying when it does not fit in my MBP 15 ".

  Thank you

  You can try to reset the Simulator, but I think it's just the default value for the last type of device used.

• audio sound is undefined by default device... I tried to fix that, but nothing is corrected.

  Auidio sound is not set by default to the audio device. I tried several times to fix it, but nothing works. Olease help...

  Hello

  ·          What happens when you try to change the default device?

  Step 1: run Microsoft fix noise issues

  http://support.Microsoft.com/mats/NO_SOUND

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• Headphones are the default communication device, won't change default device.

  Hello

  I have sound problems on my laptop Compaq 610.  When I plug my headphones, sound continues to out speakers and not the headphones.    I tried to go into the control panel and ensuring that the headphones were put under the default playback option.  "Headphones (RTC)" are defined as the "default communication device" and "speakers/HP" is set as "default device".  It seems like a simple solution, I just need to change setting headphones and make reading the value default, right?  But when I try to do, it won't let me.  The option is there to make the headphones the default device, but when I click it, it does nothing. I also tried to disable the speakers, in this case, nothing worked.

  I must also mention that when I test the helmet in the Advanced Properties menu, they work perfectly.  I also did a repair on playback devices in the control panel.  It comes up saying that the problem is that the headphones are not defined as default.  I click on 'Apply this correction' and it comes up saying 'Not fixed.'?
  I have Windows 7 and IDT High Definition Audio CODEC (already tried to remove and reinstall the driver.)
  I saw this same issue of another person, but each thread has the same suggestions and in the end, remain unresolved.  If anyone knows anything else that I can do, let me know.

  Hi danfriese,

  I suggest you to check with the volume settings and check if it helps.

  1. right click on the speaker icon in the taskbar, then select volume control options.

  2. put a check mark on "all devices evolving sound.

  3 make sure you have "Default uncontrolled communication device".

  4. place a check mark on the speakers and headphones.

• Headphones may not be on the default device

  When the earphones are plugged in, sound continues the coming from the speakers, but also through the headphones. I tried to get a sound coming through the headphones, but so far I have not found a solution. I tried to remove the IDT High Definition Audio CODEC, but it is simply reinstalled after rebooting. Everything is also updated. I think the main problem is that I can not put the headset as default device, but I'm not sure. Any help would be welcome!

  Hello

  This occurs when you have external speakers, by default. We need to put the headset as default.
  Exercise the functions mentioned below to set the headphones as default:
  1. go to Start and click on Control Panel .
  2. click on her, then a new window will open.
  3. in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.
  4. now check if headphone is listed there and right-click on it and choose activate.
  5. Select the headset and click on "as default'.»»

  I suggest you follow the link and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I also suggest you to reinstall the audio driver and check.

• the AAA authentication enable default group Ganymede + activate

  I implement CSACS 4.0. First of all on the client, I will apply aaa authenticatio / authorization under vty. The issure if I use the followin command

  the AAA authentication enable default group Ganymede + activate

  What happens if I connect via the console? I need to enter a name of user and password?

  Here is my configuration

  AAA new-model

  Group authvty of connection authentication AAA GANYMEDE + local

  the AAA authentication enable default group Ganymede + activate

  authvty orders 15 AAA authorization GANYMEDE + local

  RADIUS-server host IP

  Radius-server key

  Ganymede IP source interface VLAN 3

  AAA accounting send stop-record an authentication failure

  AAA accounting delay start

  AAA accounting exec authvty start-stop group Ganymede +.

  orders accounting AAA 15 authvty power group Ganymede +.

  AAA accounting connection authvty start-stop group Ganymede +.

  line vty 0 15

  connection of authentication authvty

  authorization orders 15 authvty

  authvty connection accounting

  accounting orders 15 authvty

  accunting exec authvty

  Any suggestion will be appreciated!

  It should work because it is a guest message.banner whenever you try to connect (console/vty). I set it up on my router.

  If you have banner motd, it will appear as well (see below). So, I have to remove it to get only the aaa banner & prompt is displayed:

  ************************************************************

  Username: cisco, password: cisco (priv 15f - local) *.

  ************************************************************

  Any unauthorized use is prohibited.

  Enter your name here: User1

  Now enter your password:

  Router #.

  The configuration more or less looks like this:

  AAA new-model

  AAA authentication banner ^ is forbidden to use CUnauthorized. ^ C

  AAA authentication password prompt "enter your password now:

  AAA-guest authentication username "enter your name here:

  Group AAA authentication login default RADIUS

  local authentication AAA CONSOLE connection

  HTH

  AK

• How can I get WMC to play sounds on the default device?

  I'm under WMC via HDMI to a SAMSUNG TV. Works very well, but to get a sound to play through the TV (which is in another room), change the playback by default windows to SAMSUNG device. I would like to have sound PC via the PC and only the WMC sounds via the TV.  My PC can split the sound, as with DEFAULT SAMSUNG I can go to Windows Media Player (WMP not WMC!) and the value of reading through the speakers. So has solved part of the problem, because music is now back on the PC and the TV via WMC are on TV. However, the SYSTEM SOUNDS stay with the DEFAULT device and are as such on the TV.

  The ultimate would be to have speakers as the default, and then be able to go in WMC and play through the HDMI connection on the SAMSUNG TV.  Otherwise, I need to be able to change the SOUND SYSTEM to the uncommon speakers.

  Whenever I set up through WMC speakers, he grabs SAMSUNG as the default device. If this isn't just a question of sequencing.

  Any ideas?

  Hi Tony,.

  Not sure if it is an option currently in Windows Media Center.

  However, you can post your request in the below given link and see if they can help you accomplish what you want.

  www.thegreenbutton.com/forums.

  In addition, you can leave you valuable suggestion in the below given link so that your request to change the options in the Media Center window is taken into consideration. http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Schedule of blackBerry Smartphones: vs email calendar default device

  I'm new to the Blackberry Pearl 8130.

  I use Microsoft Outlook for my calendar. I have an email address to which I've implemented on the Blackberry. However, this email address doesn't have a calendar that are associated with (and I don't want it...). The calendar application has therefore all appointments under "Default device".

  On the home screen, it shows not all appointments at all. However, when I go in the calendar app it shows all my appointments. I've selected the menu button, choose 'Select Calendar' and then choose "Default device" because the calendar is not associated with the email address.

  When I go back to the home screen it still has nothing set appointments. I assume he's still associate the calendar with the email address. I do know that not everyone uses the calendar provided with e-mail addresses, right?

  Also, when in the application calendar, after selecting "Default device", if I try to add an appointment he will add it to the calendar with the email address and not the "default device" calendar that I use with Outlook. If I need to open another post on this topic please let me know.

  Thanks in advance for your help.

  OK, here's what you need to do...

  1. download ALL your calendar in Outlook information. Make sure your correct calendar.

  2. then, basically, you will remove ALL your calendar on the BlackBerry information according to the instructions I'll post below.

  3. then, you set the address you want to see your calendar 'default' by the statement in the post above.

  Then, everything should be good. I have been facing the problem while you are now and had to do all this as well. Painless.

  (ignore the words 'AddressBook' in these instructions for you, but it all works the same).

  If you encounter errors in your calendar or address book on your BlackBerry and you want to delete the entire address book (or calendar) base on your BlackBerry, follow the instructions below. Make sure that you have a good copy of your calendar or Contacts, because this procedure will delete all the calendar entries or entries from the address book on your BlackBerry.

  1. open the Desktop Manager on your PC.

  2. open Backup/Restore > advanced.

  3. in Advanced Options, you will see a split pane screen. Left pain is what happens to save on your device and the right is a list of the existing databases.

  3 select right your address book database (or your Calendar database), and then click the arrow in the Middle pointing to the left. This will copy the information on and prepare it for the backup.

  4. once the backup is complete, click the button Clear down to erase, and then clean up the database of book full address (or calendar).

  5. once it is finished, it will ask you if you want to save the backup that you created, say you Yes and check the device to make sure that the address book (or calendar) has been duly cleared out. Now, Resync the necessary contact details and you should be set to go.

• I can't change the default device

  I can't change the default device for speakers and headphones for communication headset, whenever I click on the tab change nothing happens. Can someone help me change this setting?

  No, but try to reinstall the audio drivers. Download the latest version of the Internet site of your PC/Laptopmaker.

  See you soon,.
  Jerry

• ReadyNAS Ultra 6 OS reinstall appears to have not reset admin default password

  I had my ReadyNAS Ultra admin access, but went to test the admin password recovery tool to ensure that the program was configured ok. The recovery email was never received, and test the recovery nuked tool the password admin defined earlier. So I lost my ReadyNAS Ultra 6 admin access.

  I have more of these procedures for a reinstallation of the OS:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/22818

  http://KB.NETGEAR.com/app/answers/detail/A_ID/21107

  The operating system reinstall appers to have updated the FW according to display NAS, but I can not connect with credentials "admin" and "password" even after that.

  I can always go up the SIN of my network. I don't have admin access any longer.

  What should try this item to retrieve the ID of the admin?

  Try the default password "netgear1" (without the quotes). "password" is the default password for OS5/OS6, not for OS4.

• I can't set the HDMI output as default device and I don't get sound from the HDMI output.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit
  with the NVIDIA GeForce GTS 250 graphics card
   
  Original title: audio HDMI cable no.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit

  with the NVIDIA GeForce GTS 250 graphics card

  ==========================================================
  The following article might be worth a visit:

  Windows Vista - HDTV: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
  (See _ why don't I hear audio when I connect my computer to a HDTV)

• Change / reset admin default permissions.

  Adobe Creative Suite crashed, and I can't reinstall. Says Adobe technical support it is a permissions issue, and I have to restore my default administrator rights. How can I do this? Help! Note: I never changed the permissions or admin. parameters and certainly have not changed anything because I installed last more Adobe.

  Hello

  Did you download Abobe and save of ti on the desktop > then right click on the saved Adobe download > and then select run as administrator to install it?

  See you soon

• Calendars of blackBerry Smartphones: how to PERMANENTLY remove default device entries

  I have 2 calendars (device default and one labeled with my current email). First, I deleted ALL my entries on the calendars of device by default because whenever I have synced with MissingSync it syncs everything to my calendar for my email.  Anyway the problem I have is when I changed my email on the device (before even sync with my computer, the device default calendar is back with a bunch of OLD entries.  Where is he pulling information and is there a way to delete all the time so it never comes back?  Yes I could go back and remove all the entries ONE by ONE, but it would take a LONG time.

  Hello

  The default calendar is the calendar of the device, items synced to it will not correctly synchronize on the desktop.

  (1) delete your addresses of e-mail of the device.

  (2) use the link below to clear the Calendar database.

  (3) recreate the e-mail address you want to associate with your main calendar.

  4) go to default services and make sure that your email address for the main calendar is specified

  in the CICAL and CIMIME entries. Save it.

  (5) in the Office Manager, specify a one-way synchronization of Outlook to the device for the calendar only.

  (6) once successful, check the calendar of primary e-mail and make sure that all records are there.

  (7) run synchronization for each category separately until you have all the correct data on the BB.

  (8) to re-create any additional e-mail addresses

  (9) send service directories.

  (10) the BB has now all the calendar entries in the calendar main correct email, with no record in another.

  (11) on the PC, delete the intellisync folder and reconfigure the to 2 Sync Setup Wizard see normal.
  Thank you

  Bifocals

  Method one:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.