Administrator account locking and appearance of the 'No Drive' dialog box

I have a laptop Compaq G62-219WM.

He is 4-5 months old. It seems that I made a big mistake with regard to the hard drive.

It has never been connected to the internet, modem, router, been put into line, or even been recorded yet, because I was with my old desktop computer these last 4-5 months in order to take the necessary time and learn my way around the laptop and get it set up correctly a few hours per week. I have little knowledge of computers.

THE PROBLEM:

I took the advice of a member of the community on how to uninstall games that have settled - Wild Tangent - and entered the C drive, found the games and clicked on "Uninstall" for each of them.

They were all sent to the Recycle Bin, everything as promised. Gone! Tabula Rasa!

While still in the same session, I deleted the Recycle Bin before determining if 'uninstall' it in drive C assigned computer, one way or another.  Lesson learned!

Thus, after the stop of the laptop and then restarting him then later, I typed the password for the ADMIN ACCOUNT as usual and received the following response:

"The user name or password is incorrect" with a big red X.

When you click on 'Close', I got a message "reset the password... ».

When you click on the message "reset the password... "in order to try the ADMIN ACCOUNT password a second time, the following dialog box came:

'No drive '.

"This feature requires removable media, such as a floppy disk or USB flash drive. Please insert a disk or connect a USB flash drive, and then try again. »

I have no idea what it means. The foregoing happens whenever I type the CORRECT password. Can someone tell me if "Uninstalling" Wild Tangent games in C drive took with her, the data needed for 'Admin Login '.

Have no idea of what the dialog box 'No. Drive' wants me to. I don't understand very well to computer language. How devices recommended in the dialog box will help me go back to the 'Admin' account with the correct password. I have an account 'Standard' set up that I can enter in, but not privleges Admin account with it--can't make a big part at all - I don't think I can even connect to the internet when the time comes without Admin rights account.

Thanks for any help you can provide.

Phil

{Information}

Hi Phil,

There is no reason I can think of that to uninstall wild tangent games should affect your ability to open a session.  Try the following to see if you can access your account again.

Download the ISO on the following link.

PC Loogin now ISO

Once downloaded, use a program such as ImgBurn to burn the ISO on a CD file correctly.  A guide on how to use it is on the link below.

PC connection Guide now

Insert the CD into your PC, you cannot connect to and restart to boot from the disc.

I hope that this should simply remove your password altogether, so you can configure then comes a new.

I hope this helps.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • CS5, slow to get the "open" and "Save" over the network computer dialog box.

    I had this problem, since the suite has been installed, but recently got a lot slower. Whenever I have click on open or save, it takes 8-10 seconds just for the upcoming dialog.  CS1 has quick relief - I know it was hundreds of years ago, but I can't help but compare the two.  I have the same problem with InDesign and Illustrator. The suite is running on a Windows 7 computer with a home network, access files of a machine XP as a Buffalo Linkstation.  Once the dialog box appears, and I double click, the file is pretty quick to appear.  I did research online and I think that the problem was in the network or settings.  The network is fast, Windows Explorer has no delay in opening the search for files or other programs outside of the Creative Suite. I did an experiment to refine the problem - I closed Photoshop, disconnected the network cable and reopened the program.  WONDER - it was so FAST to open the dialog box for opening and saving files!  I closed and then Photoshop again, plugged the cable network Photoshop to and open back.  He was back at the slow opening of the dialog box.  Everything else in the programs works fine - no delay during the execution of the operations in one of the Creative Suite - it has to do with the network and how CS is looking for the files.  Can someone help me, I'm so frustrated - it adds unnecessary time to everything I do and I'm afraid to open and save files!

    Have you tried to work with the display of the dialog box at all under Windows 7 under the drop to organize (left side)? Also, is - one of your Favorites in this dialog box are pointing to something that might be offline?

  • After the opening and closing of the color picker dialog box, I get a non-specific error message.

    Anyone seen this before?

    This happens with various PS projects and did not happen before the last update.

    Thank you Heinz.

    Please refer to a similar thread the color picker error: 'Could not complete your request because the program error'

    Let us know if that helps.

    ~ Assani

  • After the upgrade of the database from10gr2 to 11 GR 2 accounts locked and expired

    After the upgrade of database 10.2.0.4 to 11 GR 2 accounts got locked and expired with the exception of the following users:
    SYS
    SYSTEM

    There are 300 + account which are internal accounts oracle are not supposed to be locked and expired in the normal HR applications product.

    How this behavior can be stopped?

    Hello

    After the upgrade of database 10.2.0.4 to 11 GR 2 accounts got locked and expired with the exception of the following users:
    SYS
    SYSTEM

    I think that you will have an interesting answer in this link:

    http://CN.forums.Oracle.com/forums/thread.jspa?threadID=2172418&TSTART=0&start=15

    This behavior seems to be related with DBUA in * 11.2.0.2 *.

    The next Note of MOS can help too:

    Frequent Locking Of Passwords With 11g Database [ID 1200813.1]
    

    Hope this helps.
    Best regards
    Jean Valentine

  • Main administrator account does not appear after creating new accounts.

    Original title: account password problems

    My sister has a windows xp operating system on his computer and yesterday I made an account for me, one for school, (she´s, a teacher) and put a password on his account lock and now today his account, which is the main account of ADM, simply does not appear with all that was on the computer, tried to restore and it wouldn let me. any help would be apreciated.

    Hi lulrich,

    ·         Account not displayed in the home screen?

    ·         Are you able to connect to the other account fine?

    ·         What happens when you try to restore the computer?

    Check to see if this article helps you.

    A user account does not appear in the tool user accounts

  • 'Manage account' does not appear in the Synchronization Options - how can I fix?

    'Manage account' does not appear in the Synchronization Options - how can I fix?

    It will be great if you could share a screenshot of what you see.

    What you trying to do?

    You have already set up your sync account? This is the only case that comes to my mind that prevents you to see the drop down menu. Take a look at this article and let me know if it seems familiar: How can I set up Sync on my computer?

  • I have a duplicate of 1 user account name and Public on my 'C' drive If I change a file/folder in either the changes occur in both.

    'Duplicate disks c' Vista

    HI - confuse problem I have a duplicate of 1 user account name and Public on my 'C' drive If I change a file/folder in either the changes occur in both.  Using WIndows Vista (Home Premium) & 4 GB of memory. How can I delete a duplicate account name of the user account and the Public safe?

    Menu of following simplified file structure (and I hope it is displayed properly):

    Thanks a lot for the help coming! John L.

    (My) desktop

    The user account name

    Public

    Computer-

    Floppy (A)

    C Drive (C)

    Users

    Administrator

    The user account name

    Public

    (D) recovery

    Ligthscribe-RW drive (E).

    |

    |

    Network

    Hello

    I suggest you to follow these steps and check if that helps:

    1. Click Start.
    2. Right-click on computer and click on manage.
    3. Click local users and groups, click users.
    4. Right-click on the user account and click on delete.

    It will be useful.

  • After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

    After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • An e-mail account does not appear in the left column of Thunderbird.

    My computer (Windows XP) has two e-mail accounts and local folders that display correctly under "Accounts Mail and News" in the troubleshooting information. But Thunderbird has stopped to show one of the accounts in the left column (the directory structure) of its start page. This account was created many years ago that the messages are placed in the local folders Inbox instead of in the Inbox of the email account (Finally, I think that Thunderbird is confusing on what is meant here), but it has worked well until recently, and for this reason I can still use the email because the Inbox of local records etc. are visible. But because this email account is not on the left, there is no way to get on the right corresponding a sign "Email, accounts and advanced features". The second e-mail account (created as a test because there was this problem) is functioning normally. I tried the fix described in questions/1141037 but nothing has changed. How can I get this account to display?

    It's probably a POP-connected account and a game, like you, to use the global Inbox.

    Open the account and settings in the server settings pane, click "Advanced". He was to use the global Inbox?

    The definition of use its own Inbox should make re - appear in the list of Auditors.

  • locking and unlocking through the command, 'cacls' locked but not unlock

    Dear Firend I tried locking and unlocking through the command, "" D:\Murali/e/p everyone cacls: n ' "

    afterwards, while liberating, he said like that

    C:\Documents and Settings\yantra > cacls d:/Murali /e /c /p yantra:F
    ACCESS_DENIED: d:\Murali

    Please someone help me

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  • Computer keeps locking and go to the Login screen

    I am running Windows Home Premium Service Pack 2. My computer keeps locking and return to the login screen. I went on the screen savers and I'm not using a screen saver and so I have not activated in him back on, return to the login screen is not checked. I tried everything I know to do and I am now at a loss. It becomes very annoying. What I'm missing here? Thank you.

    Hello

    Check the settings in the Control Panel - Power Options - upper left "require a password on Wakeup"
    If new game that will put you in the opening session after a sleep screen.

    Check these institutions:

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps and happy holidays!

    Rob - bicycle - Mark Twain said it is good.

  • I have a cloud of account creation and I want the last update for lightroom cc because I have a new camera the Olympus pen 7. Now, I can't open RAW images in lightroom cc my account number 800-832-6687 IRL (by payment)

    I have a cloud of account creation and I want the last update for lightroom cc because I have a new camera the Olympus pen 7. Now, I can't open RAW images in lightroom cc my account number 800-832-6687 IRL (by payment)

    Office CC lists the applications as "up to date" when they are not

    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

    - and added the step https://forums.adobe.com/thread/1529654

  • What is the symbol that looks like a horizontal Z and appears in the gray area behind the image in Lightroom CC? [was: Question]

    Anyone know what the symbol that looks like a horizontal Z and appear in the box grey behind the image in Lightroom CC please?

    It's the sync symbol.

  • Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me...
    I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
    now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.
    If you have an administrator password in windows, then the recovery console would need in order to log in the disk system, i.e. the c prompt.
     
    If you tried to do a repair with the cd, then it may not have worked if your cd is the sp2 version of windows on your computer has been updated to sp3 version.  for the sp2 of xp cd works, you will need to uninstall the update to sp3 via Add/Remove programs.
     
    so, now that you have enslaved the hard drive on another computer, you will need to do is try to take ownership of the files/folders:
     
     

    --
    db·´¯`·...¸><)))º>

    .

    "honeymtrk" wrote in message news: d1c5394d-1aad-4f12-bd12-bc4b485bc596...
    Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me...
    I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
    now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • Native of filebrowse using and the cascading Save dialog box

    In my application I need to open file and file save dialog box when a specific button is clicked. I looked at the docs of stunts, but I found that the native options. Tried the native alert dialog, change of filebrowse dialog type. It displays well on Simulator, but could not get any output file that will be used in the Qt code.

    I pass these parameters

    int * num = NULL;

    char * folder [1024];
    dialog_update (alert_dialog);

    to dialog_event_get_filebrowse_filepaths(event,file,num), but it always returns BPS_FAILURE.

    In addition, access_shared is present in the bar-descriptor

    Here is my code:

    //slot function
    void App::fileOpen(){
        //===========================
            dialog_instance_t alert_dialog = 0;
    
            bps_initialize();
    
            dialog_request_events(0);    //0 indicates that all events are requested
    
            if (dialog_create_filebrowse(&alert_dialog) != BPS_SUCCESS) {
                        fprintf(stderr, "Failed to create alert dialog.");
                        return ;
                }
                const char* extensions[] = {"*.*","*.jpg","*.jpeg","*.mp3","*.wav","*.mp4","*.txt","*.doc","*.pdf"};
                int items = 9;
                if(dialog_set_filebrowse_filter(alert_dialog, extensions,items) != BPS_SUCCESS){
                    fprintf(stderr, "Failed to set alert dialog message text.");
                            dialog_destroy(alert_dialog);
                           alert_dialog = 0;
                           return ;
                }
               if( dialog_set_filebrowse_multiselect(alert_dialog,FALSE)!=BPS_SUCCESS){
                   fprintf(stderr, "Failed to set alert dialog message text.");
                                dialog_destroy(alert_dialog);
                               alert_dialog = 0;
                               return ;
               }
    
            if (dialog_show(alert_dialog) != BPS_SUCCESS) {
                fprintf(stderr, "Failed to show alert dialog.");
                dialog_destroy(alert_dialog);
                alert_dialog = 0;
                return ;
            }
    
            int shutdown =0;
            while (!shutdown) {
                bps_event_t *event = NULL;
                bps_get_event(&event, -1);    // -1 means that the function waits
                                              // for an event before returning
    
                if (event) {
                    if (bps_event_get_domain(event) == dialog_get_domain()) {
    
                        int selectedIndex =
                            dialog_event_get_selected_index(event);
                        const char* label =
                            dialog_event_get_selected_label(event);
                        const char* context =
                            dialog_event_get_selected_context(event);
    
                        char **fileArray[]={};
                        int *numFiles = NULL;
                       //
                              if(selectedIndex == 0){
           shutdown = 1;//user press the cancel button on dialog; close the dialog
       }
       else if(selectedIndex == 1){
           if(dialog_event_get_filebrowse_filepaths(event,file,num)!=BPS_SUCCESS){
           fprintf(stderr,"File open fail");
       }
       else{
    
    //debug purposes
           fprintf(stderr,"File array: %d/n",sizeof(file)*1024);
               fprintf(stderr,"Num files: %n",num);
               //fprintf(stderr,"Files int: %d",files);
       }
    
       }
                    }
                }
            }
    
            if (alert_dialog) {
                dialog_destroy(alert_dialog);
            }
            //===========================
    }
    

    Native Subforums have no useful information on this subject. Any help is greatly appreciated

    Hello again, here's the example as promised.

    To use the native filebrowse dialog box, the native code must run in its own thread to prevent the user interface in the Cascades to block. This is achieved by encapsulating all the dialog box code in a class derived from QThread.  The class I wrote is called FileBrowseDialog

    FileBrowseDialog.hpp

    #ifndef FILEBROWSEDIALOG_HPP_
    #define FILEBROWSEDIALOG_HPP_
    
    #include 
    #include 
    #include 
    
    /*
     * The file browse dialog displays a dialog to browse and select
     * files from shared folders on the system.
     */
    class FileBrowseDialog : public QThread
    {
        Q_OBJECT
    
        /*
         * QML property to allow multiple selection
         */
        Q_PROPERTY(bool multiselect READ getMultiSelect WRITE setMultiSelect)
    
        /*
         * QML property to read the selected filenames
         */
        Q_PROPERTY(QVariant filepaths READ getFilePaths)
    
        /*
         * QML property to set or get the file filters. This is an
         * list array variant.
         */
        Q_PROPERTY(QVariant filters READ getFilters WRITE setFilters)
    public:
        /*
         * Ctor and Dtor
         */
        FileBrowseDialog(QObject* parent = 0);
        virtual ~FileBrowseDialog();
    
        /*
         * Exposed to QML to start the run loop which creates and displays the dialog.
         * The dialog is shown until a button is clicked.
         */
        Q_INVOKABLE void show();
    
    public:
        /*
         * Getter for the selected filenames QML property
         */
        QVariant getFilePaths() const;
    
        /*
         * Setter and Getter for the filters QML property
         */
        QVariant getFilters() const;
        void setFilters(QVariant const& value);
    
        /*
         * Getter and Setter for the multiselect QML property
         */
        bool getMultiSelect() const;
        void setMultiSelect(bool value);
    
    signals:
        /*
         * Signal emitted when the OK button has been clicked on the browse dialog
         * The OK button is not enabled unless a file is selected
         */
        void selectionCompleted();
    
        /*
         * Signal emitted when the cancel button has been clicked on the browse dialog
         */
        void selectionCancelled();
    
    protected:
        /*
         * Implements the run loop. Dialog stays open until a button is clicked.
         */
        virtual void run();
    
    protected:
        dialog_instance_t m_dialog;
        bool m_multiSelect;
        QVariantList m_filePaths;
        QVariantList m_filters;
    };
    
    #endif /* FILEBROWSEDIALOG_HPP_ */
    

    FileBrowseDialog.cpp

    #include "FileBrowseDialog.hpp"
    #include 
    #include 
    
    FileBrowseDialog::FileBrowseDialog(QObject* parent)
        : QThread(parent)
        , m_multiSelect(false)
    {
        m_filters.push_back(QString("*.*"));
    }
    
    FileBrowseDialog::~FileBrowseDialog()
    {
    }
    
    void FileBrowseDialog::show()
    {
        if (!isRunning())
        {
            m_filePaths.clear();
            start();
        }
    }
    
    QVariant FileBrowseDialog::getFilePaths() const
    {
        return m_filePaths;
    }
    
    bool FileBrowseDialog::getMultiSelect() const
    {
        return m_multiSelect;
    }
    
    void FileBrowseDialog::setMultiSelect(bool value)
    {
        m_multiSelect = value;
    }
    
    QVariant FileBrowseDialog::getFilters() const
    {
        return m_filters;
    }
    
    void FileBrowseDialog::setFilters(QVariant const& value)
    {
        m_filters = value.toList();
        qDebug() << "filter count: " << m_filters.count();
    }
    
    void FileBrowseDialog::run()
    {
        bps_initialize();
    
        //request all dialog events
        dialog_request_events(0);
        if (dialog_create_filebrowse(&m_dialog) != BPS_SUCCESS)
        {
            qDebug() << "Failed to create file browse dialog.";
            emit selectionCancelled();
            return;
        }
    
        //set the selection filters
        if (m_filters.count() > 0)
        {
            char** ext = (char**)new char[m_filters.count()*sizeof(char*)];
            int i = 0;
            for (QVariantList::iterator it = m_filters.begin(); it != m_filters.end(); ++it, ++i)
            {
                QString filter = it->toString();
                if (!filter.trimmed().isEmpty())
                {
                    int length = (filter.length() + 1) * sizeof(char);
                    ext[i] = new char[length];
                    strncpy(ext[i], filter.toAscii(), length);
                }
            }
            if (dialog_set_filebrowse_filter(m_dialog, (const char**)ext, m_filters.count()) != BPS_SUCCESS)
            {
                qDebug() << "unable to set file browse dialog extensions";
            }
            for (i = 0; i < m_filters.count(); i++)
            {
                delete ext[i];
            }
            delete ext;
        }
    
        if (dialog_show(m_dialog) != BPS_SUCCESS)
        {
            qDebug() << "Failed to show file browse dialog.";
            dialog_destroy(m_dialog);
            m_dialog = 0;
            emit selectionCancelled();
            return;
        }
    
        bool shutdown = false;
        while (!shutdown)
        {
            bps_event_t* event = NULL;
            bps_get_event(&event, -1);    // -1 means that the function waits
            // for an event before returning
    
            if (event)
            {
                if (bps_event_get_domain(event) == dialog_get_domain())
                {
                    //0=ok, 1=cancel
                    int selectedIndex = dialog_event_get_selected_index(event);
    
                    if (selectedIndex == 1)
                    {
                        int count;
                        char** filepaths;
                        if (BPS_SUCCESS == dialog_event_get_filebrowse_filepaths(event, &filepaths, &count))
                        {
                            for (int i = 0; i < count; i++)
                            {
                                qDebug() << "selected file: " << filepaths[i];
                                m_filePaths.push_back(QString(filepaths[i]));
                            }
                            bps_free(filepaths);
                        }
                        emit selectionCompleted();
                    }
                    else
                    {
                        emit selectionCancelled();
                    }
    
                    qDebug() << "Got file browse dialog click";
                    shutdown = true;
                }
            }
        }
    
        if (m_dialog)
        {
            dialog_destroy(m_dialog);
        }
    }
    

    This class derives from QObject (by QThread) which means that it can be used by QML when it exposes properties and signals. The FileBrowseDialog class has 3 properties

    -multiple selection: a Boolean flag indicating if single or multiple selection is allowed

    -filepaths: a read only value that returns the list of files selected

    -Filters: a read/write value is where you can specify one or more filters to file (for example, ".doc", "*.jpg") etc.

    The next part is how you call the FileBrowseDialog through the QML. To do this, we must inform the QML of the FileBrowseDialog page. This is done in the App class via the qmlregistertype code.

    App.cpp

    #include 
    #include 
    #include 
    
    #include "app.hpp"
    #include "FileBrowseDialog.hpp"
    
    using namespace bb::cascades;
    
    App::App()
    {
        qmlRegisterType("Dialog.FileBrowse", 1, 0, "FileBrowseDialog");
        QmlDocument *qml = QmlDocument::create("main.qml");
        qml->setContextProperty("cs", this);
    
        AbstractPane *root = qml->createRootNode();
        Application::setScene(root);
    }
    

    The QML is now ready to be able to use the FileBrowseDialog. The example below is a page complete qml which has a button and a label. When we click on the FileBrowseDialog button is open, and all selected files will appear in the label.

    Main.QML

    import bb.cascades 1.0
    import Dialog.FileBrowse 1.0
    
    Page {
        content: Container {
            Label { id: filebrowseDialogLabel }
            Button {
                text : "File Browse Dialog"
                onClicked: {
                    filebrowseDialog.show();
                }
            }
            attachedObjects: [
                FileBrowseDialog {
                    id: filebrowseDialog
                    multiselect : true
                    filters : ["*.doc","*.jpg","*.txt"]
                    onSelectionCompleted: {
                        if(filebrowseDialog.filepaths.length>0)
                            filebrowseDialogLabel.text = filebrowseDialog.filepaths[0];
                        else
                            filebrowseDialogLabel.text = "no file selected";
                    }
                    onSelectionCancelled: {
                        filebrowseDialogLabel.text = "file browse dialog was cancelled";
                    }
                }
            ]
        }
    }
    

    And it's pretty much just invoke the native dialog file navigation in stunts. Please note save the file would follow a similar model, but I found that this dialog box was not particularly useful because it displays only a simple dialogbox with a text file name entry.

    See you soon

    Swann

Maybe you are looking for

  • import icloud drive to imovie

    I copied videos iCloud Drive on my iMac. When I try to import videos into iMovie I can´t find the ICloud drive on the list where to import them from.

  • Songs in the library, not the same indictment

    My laptop shows 177 songs but my new desktop computer only 60.  How can I get the rest of my songs on my desktop computer?

  • The problems of ios 9.3

    I have an iPhone 6 Plus and have experienced serious problems after the update my iOS to 9.3. These problems include: 1. when I click on a link in an email with the application "Mail" to Apple, iPhone freezes instead of on the web linked as he had be

  • excellent save as

    This is a 2 part question: 1. I have a VI that writes data to excel, but I want to touch my original file and save it under a different name, I get an error 2. for the new name, I want to add a timestamp but cannot find how to get the current time PC

  • Impossible to update error 52f code updates in security for Office 2003

    I can not install updates for: updating security for office 2003 KB2687323Update of security for office 2003 KB2687324Update for Outlook 2003 KB2687403 junk mail filter I get a code of error 52f. I woulb be more thankful for a solution to this dilemm