Administrator password problem

I have a HP Pavilion dv7 laptop running Windows 7.  I have problems with it starting and leaving me with a black screen with just my cursor showing.  I can't do anything with it.  I could get the command prompts at the start to where it gives me the opportunity to leave the computer to repair itself. However: when I click on it, it forces me to submit my local/admisnistrator username and password before it will enter the phase of repair.  I never put the password that I remember and we tried on every password that I can remember never use without result.  This is the first part...

I was able to get a screen that asks me to a self diagnostic run on the test at startup computer.  The result is:

Memory test: past

Smart Check: spent

DST short: failure failure ID: RU63NO - 58H & 4 s - XD002J - 60XR03 product ID: WA794UA #ABA

Can someone help me with this problem.  I don't know what to do, and can't afford to take it to a computer specialist.

Thank you



DST failed message indicates the hard disk has failed or is failing fast and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example, you have a HDD 500 GB so that you could use a 750 GB hard drive, but not a 320 GB hard drive.

Tags: Notebooks

Similar Questions

  • The BIOS administrator password problem

    Hello. Im having a problem with my computer Bios administrator password. I remember I put a password once, and then I removed the password once again, but now that I formatted my pc and returned to windows 7 ultimate, when I press F10 it asking me a password. I tried to put the same password I used the first time I tried, but it was not valid. I tried to put my user password is the administrator user, and it did not work... After 3 passwords, it shows me the numbers and I can't do nothing but put it off and on again.

    What seems to be the real problem? can someone help me? I need to make some changes in the video memory Bios.

    My laptop is a HP pavilion dv6-2150us, inter core i3

    Try the following

    Please don't forget to share your positive or negative result with the community.

  • HP Envy 3570nr: administrator password problems

    I have just returned from holiday and got the lock screen when I did research online I could not find a code for my code wrong password which is 54148215. Please help to add that I'm back to work tomorrow and use this laptop


    Enter: 41820831

    Regarding the other issue mentioned in your MP, try the following.

    Hold the ctrl and alt keys, then press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When system restore interface has loaded, select a restore point at least 48 hours before the problem arose first and then proceed with the restoration of the system.

    Kind regards

    DP - K

  • Logon administrator password problems

    I have 3 accounts of different profile on my computer.  I can't connect to one of the accounts which is be the administrator.  I get an error saying password failed.  I have not set up a password on any of the accounts, but all of a sudden it says I need to have a... I don't know if someone using my computer accidentally entered a password and I have no idea how to get around that!    I'll try to remove and to put in place another but I can't do because he will have the password of the administrator.

    Thank you!


    In this scenario, the only way to reset the password is to use the password reset disk. If you have created the disk of your computer, you can check out the article below to use.

    Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

    Hope this information was useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The HP Pavilion tx2500 zero administrator password problem

    My brother gave me his old laptop. When I turned there is a blue box asking me to "enter the password administrator or power on password." After that three bad tent the screen says 'disable system' key: 64233925. The laptop is a few years old, it is out of warranty, but I'd love to give it to my son as a laptop starter. Can someone help me?


    Restart and enter the code:


  • HP Pavilion: administrator password problem

    Everytime I turn on my hp Pavilion I get "Please enter the password administrator or power on password" I don't know either, and if I get the incorrect password three times he says "system disabled" and gives me the number '74734980' tha.
    someone please help.


    Please read the first post on the link below for what to do with the system off (halt) code given by the PC.


  • 2000-2202TU HP laptop: administrator password problem

    Mr President.

    Please provide the password for my laptop... disabled system code is 67889596


    Please try:


    Kind regards.

  • problem with my laptop asking for the administrator password or power on password

    I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586


    Try to enter: 40585508

    Kind regards

    DP - K

  • Administrator password not accepted in the login window. had a problem with rogue program. How can I reset the password or login?

    Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.)

    How can I connect?

    Hi Annaba-m,

    Try the following.

    Step 1: Try to start in safe mode. Check if you can login as administrator.

    Step 2: If you are able to connect then try to change the password. Restart the computer in normal mode to see if you can connect.

    Microsoft Windows XP - overview of user accounts

    Microsoft Windows XP - Types of user accounts

  • Problems with the Vista administrator password


    I am currently not able to download microsft update or some other program using vista, because I wonder an administrator password. I never set a password for it, but I enable usage on control panel account. Y at - it a default password or any other way to solve this problem?

    Thank you

    Hi Ry1981

    It seems that your user profile is damaged.

    1. we can attempt to activate the default Administrator profile and check.

    2. create a new user profile and check.

    3. If this new user works very well then screw your damaged user profile.

    Now connect to your new profile and check if you get the same error.  If this isn't the case, disable the default Administrator again. As it should be used only when nothing else works.

    And now to disable the default Administrator account again. Follow the steps in the Article and on this line at the command prompt, type net user administrator / active: No., then press on ENTER. (Yes No change)

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with customization specifications setting Administrator Password Manager

    I have two problems.

    I have a model R2 Windows Server 2012 in a vCenter 5.1 (Build 1123961) environment. I created a vSphere Client Windows customization feedback, however, (and the main issue) I notice that it does not have the administrator password to what I entered after it don't this is sysprep deployment of a model.

    I've created a script around to do this, which works very well, unless I experience my second question. When customization is started, it creates the event "vim.event.Customization.StartedEvent". He is then supposed to create the 'vim.event.CustomizationSucceeded' event once it has successfully managed the customization, including the command sysprep (and setting the password). Occasionally, but does not trigger the event "vim.even.CustomizationSucceeded" until the days or weeks after the initial event of beginning of customization, which will cause the sysprep crush my difficulty scripts and not allow me to log in under the administrator because of the question first, main account.

    Any thought to why sysprep does not have the administrator password to what I specified in the customization of the OS? Or why the successful event of customization does not always raise after it was launched (in minutes and not days/weeks)?

    I ask just once more: the administrator password model guest empty OS?

    vSphere 5.5 Documentation Centre : you can change the administrator password if the password for administrator on the Windows virtual machine is empty. If the model or the Windows virtual machine already has a password, the administrator password does not change.

  • I lost my administrator password and now have problems with unwanted programs running at startup.

    I don't remember my password and now cannot make changes to my computer - specifically I want to stop

    unwanted running programs to the start.  It takes 13 minutes to start my computer.


    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    In your case, the advice of Microsoft are re - install the operating system.

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log in to Windows and you will need to re - install Windows. »


    This is how you would normally change programs start and some programs under Tools > Options give you the ability to start when Windows starts, or not...

    "How to use MSCONFIG in Windows Vista"

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    See you soon.

  • Windows 7 Administrator password change problem

    I have Windows 7 Home premium installed. Recently, strange thing happens on the local administrator account. When I change the admin password, it is accepted and when I log off and try to connect again, the new password does not work. He returned to the former.

    Can I use an another user account with administrator right to change the administrator password, it works once with the new password. After I logout of the administrator account and try to connect again, he returned again to the old password.

    Any help please.

    I am referring to the 'Local Administrator' or "built-in Administrator" account, deleting, so it is not possible.

    I tried using another admin account to change it, as stated in my previous post, it worked only once. After that, I have to use the old password to connect!

    In Windows 7, all admin level accounts have the same privileges. If the built-in Administrator account is corrupted, then you can use any other admin account.

    Is it was my machine then I ran this test:

    1 log in under an administrator account.
    2. click on the start planet.
    3. type cmd.exe in the search box.
    4. press on Ctrl + Shift + Enter
    5. click on "run as Administrator".
    6. type the following commands and press ENTER after each:
    NET user administrator 123456

    (to change the password)

    NET user Administrator

    (see when the password was changed)

    7 restart, and then run the command net user Administrator again and check the date again.

  • I have a problem with the connection to the computer after you forget the administrator password.

    Original title: Windows administrator password

    I forgot my password for windows 7 on a HP Pavilion laptop. I use the fingerprint reader to log on now (Administrator). I do not have the password reset disk also. What should I do to reset the password?

    Thank you...

    Here you go:

    1. Start the computer with your CD to repair Windows.
    2. Select "Repair Mode".
    3. To set Windows to a point before you changed the password, use "System Restore".
    4. Sign in with your old password.
    5. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

    It is available, you have an installation CD or created a CD to repair.

  • I have a problem with the connection to the computer by using the administrator password.


    I read a LOT of reviews Q & A on this website that attempt to explain how to change a password administration windows 7, but none have helped. I wanted to put parental controls on my account initially in order to avoid the display of some sites on my browser. Of course, I didn't understand that this control is defined in the internet options. In my ignorance, I went for the parental controls in Control Panel but found that I couldn't put parental controls on my account because it was the only account and, therefore, the administrator. To set up parental controls, I created a new account. Later, I changed the settings of the account on both accounts. I changed the new administrator account and changed the original account (use the Everyone account) to a standard user. Therefore, I have contiunued to try to put in place controls, but I was interrupted by a completely random computer restart! I DID NOT HAVE IT! I was pretty confused, but I decided that I would forget the reboot and connect to my new administrator account to continue with the configuration of the parental control. Do not forget that I have not set a password for this new account yet, so I wasn't surprised when he asked for a new password. So I typed in my old password from my previous account, (who had been the administrator password), typed the password twice and you press on enter. He said it was the wrong password. I typed in every password I've ever had in and since then I have not had administrative access to my own computer. I tried to access the cmd and as an administrator, but it NEED THE ADMINISTRATOR PASSWORD! PLEASE HELP ME!

    Here you go:

    1. keep tapping F8 during the first phase of startup.
    2. select Repair from the menu.
    3. Select an administrator account, and then enter its password.
    4. When you are prompted, select System Restore.
    5. set Windows to a point before changed your account details.
    6. plan in advance and create, test and document a spare, even admin account that you have a spare House key. Have a single administrator account is taking a huge risk.

Maybe you are looking for