Adobe Acrobat does not see the PC even after Windows Update 10?

Similar Questions

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• Microsoft Update does not work the said tool fixit windows update component needs repair

  Just realize a long week of windows XP pro repair installation, overcome all sorts of problems with curtain at 34 minutes, motherboard drivers do not install it, do not read the files compressed on the CD XP Pro, then suspended from the activation screen (let me not log in or access the acvtivation screen), I bypassed it drank install IE8 then used the phone to activate XP Pro. Currently have Avira AV just rid of Avast and newly installed because it is not quite as good the latest VB100 test report.

  Anyway jumped along to get the updates of security (116) and all have failed. Microsoft fixit tool allowed to have a look at the problem and it failed. He said that the Windows component update should fix it.

  I am currently in safe mode with network.

  Very well.

  At this point, we'll keep the first rule of computers in mind (i.e., If it isn't broken, don't fix it) & leave well enough alone--at least for now. Good luck in the future.

• Mac does not accept the password - even after changing

  My friend uses a macbook air, I'm pretty sure OSX Yosemite running.

  Suddenly her pimp would not accept his password more.

  We tried to reset the password via his apple ID, but even with the new password it told us that the password is not correct.

  Any ideas how we can solve this problem?

  Thank you!

  Hello

  Try to 'Reset' the admin password > change or reset the password of a user account from OS X - Apple support

• BlackBerry smartphones can not see the music even after slipping / move

  Because I had the same problems with MM and MS, I tried the solution that I've seen several people post here and have done the following:

  On my BB Pearl

  Options > media card

  media card support: on

  encryption mode: no

  mass storage mode: on

  auto enable mass storage mode when connected: Yes

  Connected the phone to the pc using cable then slipped and dropped music to music for drive E: folder.

  Phone removed from the pc but the music, files are not always displayed to the top.

  If you have your connected device and browser, you can with Windows Explorer,
  Remove all bbthumb.dat files in the folder Music\.

  Unplug, then open the media application. And wait.

• Built with CCP by the package Adobe Acrobat does not completely settle

  Built with CCP by the package Adobe Acrobat does not completely settle.  It starts as if it's installing just fine then suddenly disappears without error.   I'm installing under the local administrator account and simply double-click on setup.exe created in the build folder.  Am I missing something?

  Hi rivera2u & TRU Software,.

  I think you're just double click on the deployer of Exception and not running the same command prompt. Below is the syntax that we use everything using the deployer of Exception on your machine (s).

  ExceptionDeployer    --workflow=install    --mode=pre|post    --INSTALLDIR=    --installLanguage=forAcrobat>    --abortOnFail    --help

  The same is mentioned in the link shared by Abhijit earlier.

  Please let us know if it works for you or not.

  See you soon,.

  Michael Sharma

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

• Adobe InDesign does not recognize the fonts or characters in the character Panel Manager

  Hello

  I have Adobe Indesign CC (9.1.0.33) installed on my Mac Book Pro 2010, OSX10.8.4, with two user accounts in my main account ID (admin) works fine, no problem at all, if I connect to my account (not admin) second ID embarks, he posts two errors

  Adobe InDesign does not recognize fonts as a plug-in Manager.InDesignPlugin

  Adobe InDesign does not recognize the Panel.InDesignPlugin character as a plug-in

  I, repaired permissions, reinstalled ID, tried an admin disconnecting and logging in the second account, but the problem persists.

  could someone who has the slightest idea of what is happening maybe please notify.

  see you soon

  Kevin

  Hey Kevin,

  You can uninstall InDesign and you can check non installed in the Applications folder if a file for Adobe InDesign CC still exists. If so delete this folder manually and remove the trash.

  Install CC InDesign again. Do it from your administrator account.

  Thanks and greetings

  Javed

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument