Adobe InDesign is unable to start because you don't have sufficient rights to folders preference

Similar Questions

• Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

  I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

  • Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  • Trash the current demand for Firefox to do a cleanup (re) install.
  • Install the new version you downloaded.

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Can not open CD player - you don't have sufficient rights to perform this operation Vista Business

  I put a CD or DVD in the drive and double-click it (it can be either a blank disc or an already burned disc just try to see what is on the disk) and every time we get

  "You don't have sufficient rights to perform this operation.

  I'm lost,

  Windows Vista Business

  Hello

  ·        Are you connected the computer as an administrator?

  Method 1:

  You can try running the fix in the below article data and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  You can check if the third-party application is causing the problem. To determine which application is causing the problem, you can configure the computer to clean the start State and check if that helps. To configure the startup mode minimum State follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "The operation cannot be performed because you don't have sufficient privileges for some of the elements" is the message I get when you drag the icon of firefox to application icon?

  This is my laptop and I know my password install but do not understand why it gives me this message when you try to copy the new Firefox on the old Firefox application I currently have (to. 3.0.3).

  Any suggestions? I am also concerned about all my favorites organized, would be completely lost in the replacement of the software?

  If you have problems with the update or the permissions then more simple is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Error "You do not have sufficient rights to perform this operation" while trying to format the hard drive.

  Title: insufficient rights to the HD format

  I have Admin rights on my new laptop Dell E-6520, Win7 running.

  When I try to format my modular HD, I get the following message:

  "You don't have sufficient rights to perform this operation.

  Any suggestions would be greatly appreciated.

  THX,

  SB

  Hello

  I am happy to know that the problem is solved. Do not hesitate to contact us, in the case where you face other problems in the future.

• Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

  Separated from this thread.

  I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

  The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

  Hi Bruce,.

  You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

  You did changes to photo viewer settings prior to this problem?

  I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  Let us know the status of the issue.

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• Download videos from Sony Handycam; error: do not import because you don't have access privileges for the file to import

  Original title: Downloadinf videos from Sony Handycam

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  It is probably a permissions problem.

  Appropriating a file or a folder
  Add 'Ownership' in the context Menu for files, folders, and drives

• I can't play a Webinar because I don't have the right codec?

  I can't play a Webinar because I don't have the right codec?

  Hello

  1 did you change on your computer before this problem?

  2. which web browser is running on your computer?

  3. what webinar application is installed on your computer?

  4. you receive an error message and prompt to install the codecs?

  You can read the article and check if it helps.

  NOTE: WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. :

  For more information follow the link below:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Response with more information to help you further on this topic

• Could not open a file to VMDK using SAN transport using Netbackup 7.1 "you don't have access rights to this file.

  Hello

  I'm trying to backup VMware clients using Netbackup for VMWare 7.1 using the type of transfer to san, and the forum NBU told me that my vm-admin user has no right of access to the VMDK file. However, I checked and I can download the backup host VMDK files and take and remove snapshots as vm-admin user.

  The servers are configured as follows:

  vc01 is a Win2008R2 vSphere 5.1 Server

  ENC1-bl09 by enc1-bl12 are blades running ESXi 5.1

  VM-bak01 is a Win2008R2 NBU media server 7.1 server and is defined in NBU as backup VMWare host

  Data warehouses that contain the VMDK files for the guests are all about EMC and HDS storage accessible via the San by the NBU Media Server and ESXi servers (although mapped through different areas)

  ESXi servers have access to local data and NFS storage warehouses too, but none of these warehouses are used by clients.

  I could save a few guests we via NDB, but they finish in time because the network is not fast enough. Estimated time of 8 days for nightly backup!

  So I have to use a SAN to back up the guests, but he keeps fails with the error below...

  09/01/2014 10:25:16.0745: g_vdInterfaceLogger:.\libvix.cpp:1683 < INFO >: SAN: cannot access a SAN/iSCSI LUN support this virtual disk. (Tip: If you use vcbMounter, you can use the option "nbd m" to move to disk-based network access if that's what you want.) If you were trying to access at the file level, stop the vmount Service by typing "net stop vmount2" in a command prompt to force vmount to re-scan for the SAN LUNS and try the command again.

  09/01/2014 10:25:16.0745: g_vdInterfaceLogger:.\libvix.cpp:1683 < INFO >: DISKLIB-LINK: 'san://snapshot-1968 [WAS-B-DS01] FTL-PROD-SOAHTP02/FTL-PROD-SOAHTP02.vmdk@MAL-VC01?vm-admin/XXX': cannot open (you don't have access rights to this file).

  09/01/2014 10:25:16.0745: g_vdInterfaceLogger:.\libvix.cpp:1683 < INFO >: DISKLIB-STRING: 'san://snapshot-1968 [WAS-B-DS01] FTL-PROD-SOAHTP02/FTL-PROD-SOAHTP02.vmdk@MAL-VC01?vm-admin/XXX': cannot open (you don't have access rights to this file).

  09/01/2014 10:25:16.0745: g_vdInterfaceLogger:.\libvix.cpp:1683 < INFO >: DISKLIB-LIB: can't open 'san://snapshot-1968 [WAS-B-DS01] FTL-PROD-SOAHTP02/FTL-PROD-SOAHTP02.vmdk@MAL-VC01?vm-admin/XXX' with flags 0x1e, you have no rights to this file (3390).

  09/01/2014 10:25:16.0745: vdOpen:.\VixInterface.cpp:196 < ERROR >: VixDiskLib_Open() error. You leave

  09/01/2014 10:25:16.0745: openLeafSnapshotDisks:.\VixGuest.cpp:452 < ERROR >: vdOpen() error = 13. Call of closeLeafSnapshotDisks()

  09/01/2014 10:25:16.0745: openLeafSnapshotDisks:.\VixGuest.cpp:555 < ERROR >: you quit with failure

  09/01/2014 10:25:16.0745: vixMapObjCtl:.\VixCoordinator.cpp:904 < ERROR >: you leave with 23

  09/01/2014 10:25:16.0745: < ERROR > vix_map_objctl:.\libvix.cpp:1138: error 23

  Please someone on this forum explaining why VMWare is denied access to the VMDK file?

  The problem was solved by upgrading to 7.1.0.4

  http://www.Symantec.com/business/support/index?page=content&ID=TECH174128

  Thanks to Philippe of the Symantec Connect forum for the answer

• You don't have access rights to this file

  Hello again everyone.

  I get an error using the example of application the VDDK (vix-disklib-sample).  I am using the SAN mode for the information on the disks, but I get this error message:

  Error: [vixDiskLibSample.cpp:599] d you don't have access rights to this file

  I am using the same machine that I used in my previous post: 1730997.  I will repeat them here:

  The command I used:

  LD_LIBRARY_PATH = / usr/lib/vmware-vix-disklib/lib64. / vix-disklib-sample - info.
  initex - /root/.vmware/vix-disklib.conf - libdir/usr/lib/vmware-vix-disklib.
  -mode 'san' - 'moref = vm-13141' vm - ssmoref ' snapshot-13314' \ '.
  -welcomed the vcenter.company.com - user "administrator@company" - password "xxxxxx".
  "[VM-devices] vMA/vMA - 000001.vmdk'."

  I checked using MoB that those are references to managed object appropriate for the virtual machine and the snapshot (see my previous post).

  This is the machine I use it on:

  Processor: 2 x Xeon of Intel (r) CPU 5150 @ 2 .66GHz
  Memory: 3924MB (3331 MB used)
  Operating system: Ubuntu LTS 10.04.2

  Kernel: Linux 2.6.38.2 - candela (x86_64)
  Compiled: #1 SMP kills Mar 29 16:52:38 CDT 2011
  C Library: Library GNU C version 2.11.1 (stable)
  Default C compiler: compiler GNU C version 4.4.3 (Ubuntu 4.4.3 - 4ubuntu5)

  Version VDDK: VMware-vix-disklib - 1.2.1 - 323406.x86_64.tar.gz

  Think otherwise says may be something to do with the SAN mode, I ran vmware-mount to check that I could actually mount the drive in question.  I managed to mount the drive with the following command:

  LD_LIBRARY_PATH = / usr/lib/vmware-vix-disklib/lib64 vmware-mount.
  v 'KS-PROD-data center/vm/vMA' h vcenter.company.com u 'administrator@company '.
  F /root/.password f ' [VM-devices] vMA/vMA - 000001.vmdk "/ mnt/test /.

  Anyone has any ideas of what this could be?  The error is a little vague...

  I've also attached the log output

  One thing you should be aware of: you will not be able to access a drive that is currently in use by the virtual machine.  If you have created a snapshot on a virtual computer running, you'll be able to get access to the base vmdk, but not for the instant vmdk.  This is because the instant vmdk - is in use, but the base is not the disc.

• TIFF-&gt; PDF "you don't have sufficient permissions to perform this task.

  With Adobe Acrobat Pro 10, do the following

  File-> save as-> PDF size...

  Download dialogue to add files.

  I drag a bunch of files TIFF and click on 'OK '.

  I get the error above 'conversion '.

  "you don't have sufficient permissions to perform this task.

  I can make them individually, but I have files of TIFF files I want to convert to PDF

  Any help appreciated.

  Concerning

  Adam

  p.s. - I can change my nickname - was tired of searching for unused names, therefore entered a string of digits... uh...

  In Adobe Acrobat format, use an Action to do this.

• Error - you don't have sufficient access to remove this program. Cannot uninstall McAfee security software.

  Original title: trying to uninstalled McAfee Security Center provided by AOL.

  When you attempt to uninstall the program I get the message "you don't have sufficient access to remove this program. See your system administrator. I'm listed as the administrator and the only user on this computer. I would like to uninstall and reinstall the program not working due to a missing or damaged file.

  Hi Diana,

  You are able to install/uninstall other applications of the machine?

  I suggest you to follow the link given by McAfee to uninstall and reinstall McAfee consumer products.
  How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OLAP_error (1020043): you don't have sufficient access - HsSetValue question

  Hello

  I use version 11.1.1.3 Hyperion Essbase BSO applications and get the error message below when I tried to present data using smart view. The cells contains HsSetValue formula and able to present data without the function of this formula. Please could you help me solve this problem.

  OLAP_error (1020043): you don't have sufficient access to perform a lock on this database

  Note:

  I passed the Planning application data.

  Thank you

  Michel K

  Take a look at this Smart View error 1020043 doc - you don't have sufficient access to perform a lock on this data base (Doc ID 1591024.1)

  Kind regards

  Deker P.

• Error 1925 you don't have sufficient privileges to perform this installation...

  I created an IE7 thinapp msi some of our users need to use a particular web application. From the test to the deployment, the following error message appears: Error 1925: you don't have sufficient privileges to complete this installation for all users of the machine. Log in as administrator and then try to install again. I have the MSIRequireElevatedPrivileges set to 0. Is there anything else I need to set to allow anyone to install this application? Thank you.

  Can you check by setting = 0 MSIDefaultInstallAllUsers? Make sure that you rebuild the package using build.bat