Adobe PDF printer crashes when you paste into the file name field

Similar Questions

• I just bought an iMac running 10.11.2 so bought a full subscription to Adobe Photoshop CC crashes when you open an illustrator file, when I stick a layer copied, etc.. I have for that to be resolved. All software are up to date.

  I need assistance with PS CC 2015. It continues to crash when you open an Illustrator file, paste a new layer, etc.

  All software are up to date. I'm running an IMAC with OS X 10.11.2.

  Please fix!

  Thank you.

  Please see the problems of fonts in Adobe applications. Mac OS X

  It seems Photoshop crashes because of corrupt fonts in your system folder / I

  Kind regards

  Assani

• Nobody knows... including Adobe why Photoshop crashes when you try to print. I had Adobe take on my computer, they put it is good, and then as soon as I download an update off he goes again. ADOBE when are you going to address this problem there I

  Nobody knows... including Adobe why Photoshop crashes when you try to print. I had Adobe take on my computer, they put it is good, and then as soon as I download an update off he goes again. ADOBE when are you going to fix this problem it is we makes everyone crazy.

  I'm willing to take to social media, this problem will just on and so forth. Someone has found a permanent solution, if so can you let me know the answer.

  Hey Abram,

  What version of Photoshop are you using?

  What operating system do you use?

  ~ UL

• Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  No one can tell you anything without the proper system or other technical details info. The standard answer with all the problems of text is quite simply, you have a "bad policy" on your system and need to get rid of him.

  Mylenium

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• InDesign crashes when I click on the file tab

  InDesign crashes when I click on the file tab. I can open and save files by using shortcuts, but it is not possible to create a PDF or a package. So, I have to use the file tab. And then, InDesign stops, I need to force it to stop. I've already deleted InDesign from my computer and reinstalled, but I had the same problem. Can someone help me?

  Try to set the number of recent files to display 0

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explore Windows 7 crashes when you try to copy files, pictures, etc.

  I have Windows 7 and since a few weeks ago, every time I try to copy files, documents, photos from one folder to another or photos from my SD card to my computer, or unzip compressed files, when I try to paste, explore Windows crashes and closes.

  Can someone help me please.

  Thank you.

  If you mean that you see something like this:

  

  If this is the case, read this:

  Maybe you have a distressed Explorer Shell Extension.

  Several recent systems of the incidents involving Acer and MyWinLocker of EgisTec (which is already known to include some suspicious Explorer shell extensions) that could come preinstalled on your system.

  Even if your system is not at Acer there installed MyWinLocker and since there were many reports indicate that it contributes to crashes explore it seems a good place to start looking.

  If you look in your installed programs and find MyWinLocker or whatever it is of EgisTec and you don't know what that is, or why it is there consider just uninstall, restart, and then see how things work.

  If you have determined that MyWinLocker or any other program EgisTec intervene follow GP below, so you will be able to see all Explorer shell extensions.

  If you see all the extensions of EgisTec, software security PSD, eDataSecurity, DragDropProtect (they will be some of pink extensions) start with these first.

  If none of these things exist, continue:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display, choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  A user reported that it was necessary to restart the browser after each adjustment to do that press Ctrl-E since in ShellExView.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Illustrater crashes when you try to save files

  Hey guys,.

  We have big problems with our illustrator cs5.1 on windows 7 since today.

  For some reason, it started crashing when you want to record new and existing files...

  If we open a document existing in cmyk color mode and just text or shapes etc. in the file it will record it as normal, but it will break trying to save if we whatever it is placed in the file as a jpeg file, and it will also crash if we changed the mode to RGB color.

  We have tried everything we can think OFF... remove configuration illustrator files... Uninstall and reinstall... even with the cleanup tool on adobe...

  any ideas?

  Thanks in advance.

  Tom

  You possibly updated your graphics driver or Adobe AIR / Flash Player and is playing with the sincxe of things UI components are related to this... In addition, since file dialog boxes are involved in the present, it is possible quitre, you have changed a Windows Explorer folder view option and the program bombs now using this new default. Reset to one of the non-thumbnail view as list types then.

  Mylenium

• Merge to Adobe PDF does not when you click on

  I need to do a mail merge and send PDF files.  I've done several times, but "merge it to Adobe PDF" does nothing now.  I called about this before and someone fixed it for me.  Hoping you can help! :))

  Acrobat DC will give you the same functionality as you have in Acrobat 9, but are compatible with the Win10 and office 2013. You can download a free trial version and check if it works for you before you buy/index. Do not install on a system eval version with existing Acrobat is installed (unless you are ready to reinstall, which may not work in your situation).

• Contacts crashes when you write in the company field

  In recent weeks, whenever I have add a new contact, or modify an existing one, contact crashes when I try to write something in the area of the company. When I paste something in this area that I had already written elsewhere, it does not crash...

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Acrobat Adobe 8 automatically closes when you look at the pages

  I use Adobe Acrobat Pro 10 Windows.  When I open a pdf file and start the pagefile automatically closes.  Any ideas as to what is the cause.  Previously, it was working fine.

  Hello

  Acrobat 8 is an older version and not supported.

  Also, it is not a version compatible with the latest version 10 of Windows.

  The problem you are experiencing may be due to the incompatibility of Acrobat 8 with 10 Windows.

  I recommend you opt for the last DC of Acrobat.

  Concerning

  Sukrit diallo

• Adobe Reader 'Adobe PDF Reader"Addon when not install using the MSI installer.

  I'm trying to do a silent install Adobe Reader - and I noticed that when I use the installer EXE, with no manual configuration, I have the "Adobe PDF Reader" Addon in Internet Explorer (IE11).

  When you install the MSI file - with or without transformation, I don't get the addon. I get a "PDF link Helper" but no PDF Reader addon. If anyone has experienced this?

  Hi geoffubazi,

  The "Adobe PDF Reader" Addon should install even if you run the .msi file.

  Check under the add on-"run without authorization" option, as shown in the screenshot below and it will list the "Adobe PDF Reader" Add on

  

  Kind regards

  Rave

• AfterEffects crash when you click with the eyedropper

  

  Hello world

  I am trying to learn through step-by-step to a youtube tutorial that follows.

  My legacy crashed whenever I click the pipette.

  I followed the procedure to change the color of the massif of the same color of the text.

  I clicked on the pipette and a crash log command prompt saying the project is saved in my repertoire.

  Then my program crashed.

  The same thing happens to someone else?

  How can I choose the color even if I can't use the pipette then?

  

  That brings another question, sequelae as unstable as flash? In terms of program crash.

  CS5 is not supported on modern operating systems. This means that you will occasionally receive weird bugs. This is one of them. It is usually fixed when entering your AE preferences and change the option use System Color Picker (or something like that).

• Project crashes when you open a HTM file

  It's certainly a Monday. I encountered a new problem. I tried to add a new topic in a folder to a project of sub-project manager and then add a chart about it. When I tried to do, I got an error message saying that RoboHelp had met a probem and needs to close. I clicked on close, but instead of just close, RoboHelp locked up and I had to use the Windows XP Task Manager to close the application.
  
  All other projects work well, but whenever I try to open an htm file in a project now, I get the same error message and everything crashes. The error message refers to the following:
  
  AppName: robohtml.exe
  ModName: iwysiwyg.dll
  
  He also says that the error is written in C:\\windows\Temp\52d9_appcompat.txt but when I open the Temp folder, the text file does not exist. No idea of what is happening and how to fix it? There is a lot of content in this subproject and I can't afford to lose. Thank you.
  
  EDIT: Just to let you know... the CHM file seems fine. When I open the file directly, everything works. When I open the project and try to open any topic to edit it, RoboHelp shuts.
  
  -Travel

  In fact, everything gets backed up to the server every night so if push comes to shove, I can bug people IT, if I can't fix something myself.

  Problem solved, apparently. I tried closing and reopening RoboHelp with no luck, but after that I restarted my PC, everything was fine. I could open individual topics, make changes, and everything worked as expected.

  Thank you for responding so quickly, Peter. I'm two for two, but the day is young (at least on this side of the pond). Thanks again.