Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

Similar Questions

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Works very well with the iPad, stutters badly with Macbook Pro

  Work fine with the iPad but stutters badly when using Macbook Pro OSX Version 10.11.4 El Capitan

  We need more in detail here, please.

  I'm assuming that you are referring to AirPlay of these devices. You are AirPlaying video, music or using mirroring of the screen?

  If you are mirrored, others may comment on OS X settings to make this work.

• When I click on an RSS feed, I get this message. XML file does not appear to be any information of style associated with it... It works very well with Internet explore

  When I click on an RSS feed, I get this message. XML file does not appear to have any information of style associated with it. The same RSS feed works fine with internet explorer, any information would be helpful.
  Here are the first 3 lines from what I get

  < rss version = "2.0" >
  < String >
  < title >

  You open a new empty tab?

  Don't you see the text 'Click on the RSS buttonin the toolbar of navigation on this page?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Lightroom does not recognize the external hard drive used with your old computer.  gives it a new drive letter.  How can I do understand that it is the same as that?

  Bought a new computer.  Lightroom cannot find the photos that have been saved on external hard drive because lightroom gave a different drive letter.  How (H) instead of (E).  How can I merge them without doing a full import?

  In Windows, you can change the drive letter e (Besides, isn't Lightroom, in doing so, is Windows)

  Change, add, or remove a drive letter - Windows help

• The conversion. MOV to work with Adobe Premiere Pro files

  Hello

  I write a question on behalf of the client. The customer needs to convert MOV files that play in Windows Media for files that are compatible with Adobe Premiere. Any suggestions?

  Hello
   
  I suggest you to see link and check if it helps.
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  If the problem persists, contact Adobe and check if that helps.
  http://www.Adobe.com/support/premiere/

• I benefit from Adobe Premiere Pro compared to 12 items

  My girlfriend wants to do some consumer level video editing on my computer, which has a processor i7 - 4770K and a GTX780 graphics card.

  The question is, will be able to take advantage of the GTX780 to speed up the rendering, Adobe Premiere elements 12 etc, or will we have a pro edition to do?

  On my old computer, she thought it took a lot of time to make videos (rendering I guess?), but it was with an i5-2500, then perhaps the best CPU will be sufficient to speed things up?

  In addition, since it is relatively new to video editing all she does is at a level of consumption, if those applications never will use the same gpu so we have the foot to a pro edition?

  I have no experience with video editing so I don't know where the gpu can be used to speed things up, so if someone could develop on this it would be greate.

  Thank you!

  Your graphics card has nothing to do with the rendering speed. It is entirely a function of processor.

  The real question is which model of camcorder is your coming video? First 12 items work very well on formats such as miniDV, HDV and AVCHD.

  You can see how easy this program is to work with checking my basic training tutorials 8 free share on Muvipix.com.

  http://forums.Adobe.com/thread/537685?TSTART=30

• Adobe Premiere Pro does support the rendered assisted GPU on NVIDIA GeForce GTX 960 M?

  I am planing on buying a laptop Asus Rog G551VW-Fl052T containing an NVIDIA GeForce 960 M GTX and video editing with it using first pro and the gpu to help rendered. After searching trough the requirements here I couldn't find it. Then I saw this video on a similar laptop computer with a gpu are not not in the requirements works very well with gpu assisted rendering. Now I don't know if it works or not?

  I expect an answer, thank you!

  They do not have a list within the PrPro of video cards 'supported' as they did... so... your job is to make sure that the video card in use is at least to the standards. IF the map these standards... very well. Someone asked why PrPro has not choose to use its old GPU... that had only 512 MB of vRAM. He used this card with previous versions of PrPro, thought that it should always work. Nope... the minimum usable is now 1 GB of vRAM. It. you're fine... the list gives a choice of 2/4 GB of vRAM.

  In addition, for a cut card from nVidia, something above 1000 hearts CUDA is as important. This is a problem with the map you speak... support nVidia it lists to 640 carrots. It is quite low.

  I suggest you check during the Hardware forum... There are a lot of discussions on laptops as well as desktop computers.

  https://forums.Adobe.com/community/premiere/hardware_forum

  Neil

• DSLR images are more recognized? Adobe Premiere Pro 8.2.0, OSX 10.10.2

  A few months ago, I upgraded my mac to Yosemite and around the same time updated first.

  First CC 2014 now has major problems with DSLR images.

  First of all, I could get some DSLR footage in, but every time that I rubbed through it in the timeline panel or monitor the image source would freeze, then the software would be locked up.

  The film worked well on a PC running the latest version of first, and there is nothing unusual about this film-. MOV, .h263, same type of material that I work usually with,

  I tried to open several other projects (mainly in the non-DSLR images, but.) Vom exported by other sources) and CC 2014 works very well with it, so I think it's just something specific to this sequence.

  Today I try to do a few different sequences of DSLR first CS 2014 and it won't even find themselves in Media Browser. I try to drag the. MOV file and I get an error that the file is not recognized. I tried dragging a file from my internal drive, same problem.

  I still have installed 7.2.2 (finally the complete liberation of Adobe CC before it was a new wording 2014). Who takes the fine images in Media Browser and rub through it, as I expect.

  What is going on? What is Yosemite? Is this first 8.2.0? Adobe dropped suddenly supported native DSLR files and now expect us to transcode everything?

  Help, please.

  -Brian

  Yes, I'm not sure why Vinay response was an agreement policy: it would have been useful to show publicly.  I didn't uninstall Premiere Pro CC 2014, you click Yes to delete the preferences also, then immediately re - install.

  Here is the message from Vinay:

  Hi Brian,.

  We noticed this problem recently on 10.10.2 and we are trying to find the possible cause and according to the information I have this problem could occur due to licensing issues. So, it might be in the process of upgrading OS license files are corrupt but right now I can't comment on that. Please follow the instructions to clean uninstall Adobe products and the re - install again.

  Please uninstall all Adobe applications manually in the Applications folder one by one. Once pass below places and delete specific files.

  ~ Files / folders ~ click on the menu go to in the finder, then select go to folder option type these location and click go to navigate

  / tmp

  / Applications/Adobe *.

  / Applications /. AdobePatchFiles (hidden, use Go > order of the folder)

  / Applications/utilities/Adobe *.

  / [Startup disk] / Library/Application Support / Adobe *.

  / [Startup disk]/Library/Preferences/com.adobe*

  /Users/ [user] / Library/Application Support / Adobe *.

  /Users/ [user] / Library/Caches/Adobe *.

  /Users/ [user] / Library/caches/com. Adobe *.

  /Users/ [user] / Library/Preferences/Adobe *.

  /Users/ [user] / Library/Preferences/com. Adobe *.

  Once the premises are cleaned. Please reinstall first Pro CC 2014 just to check if it works very well. Once activated you can reinstall all applications.

  Please PM me once it is resolved.

  Vinay

• One of my computers works very well to display my beneficiaries of my bank online and the other computer says that I don't have any beneficiary, worm 35 on both.

  Everything on my online banking Web site works fine except the display of my beneficiaries. It does not, he tells me that I don't have any beneficiary. This function works very well on my backup computer with 16, 32, and 35 versions.

  That's what my Bank said:
  There was some problems with the compatibility of Firefox to view online recipients. Please, try the following steps to clear the cache and delete cookies. If there is still a problem, start Firefox in Mode safe. While you are in safe mode, press the < Alt > or < F10 > to display the toolbar. Then select Tools > Options > advanced > general. Find and stop using hardware acceleration.

  Boot in safe mode to fix the problem, but it's a bit of a pain. A refreshment or a reset seems a little drastic and I would like to know what exactly is the problem before using the shotgun approach.

  Thank you

  Thanks for the replies. I have try to disable hardware acceleration, but probably no connect fees. My only add-on is edge of adblock and I disabled it for the site. The thing is, I don't want to disable either of these elements. I'll just start firefox in safe mode, if I need to access my beneficiaries. I was hoping that someone may know something that is bad in my profile that has carried over from previous versions or another kind of corruption. It seems strange that an entire site could work very well with hardware acceleration, but not to this one point.

• I installed 20 GB memory - only 16 13 GB / showing in Premiere Pro - any help?  (Care and pictures below)

  I installed 20 GB memory - only 13 GB showing in Premiere Pro - any help?

  

  (Windows 7 64 bit - map Quadro 4000 - 20 gb DDR3 RAM PNY) I doubled checked with SPECCY that something was wrong

  

  Upgrade to Windows 8, 8.1, or Windows 7 Professional.

  In this case I suggest you install 6 x 4 GB sticks to bring the total up to 24 GB, instead of 4 x 4 GB more 2 x 2 GB you have now. Mixture of different sticks (2 and 4 GB) in the same bank of memory is not optimal. Also take a good look at your cooling. 60 degrees for a CPU under heavy load is ok, but if it was inactive, it is very high. The Quadro is also quite warm, especially if shooting Speccy was made so that almost inactive.

• Hello, I'm testing cc2015 Adobe Premiere Pro, I use it for my videos, but now it has stopped working. When I start it, it says ´´Premiere Pro could not find any video game capable modules´´

  Hello, I'm testing cc2015 Adobe Premiere Pro, I use it for my videos, but now it has stopped working. When I start it, it says ´´Premiere Pro could not find any video game capable of modules´´ and I don't know what to do, I saw a cople of solutions for mac, but not for windows ;( My PC: Intel core i5-4460 3.2 GHz, Nvidia GTX 760 2 GB, 16 GB of RAM, Windows 8.1 thank you for your attention and please help me!

  Hi PepeF,

  You have AVG installed anti-virus software? If so, disable or uninstall.

  Thank you
  Kevin

• Audio missing part of the element in Adobe Premiere Pro CS6, don't know what the problem is. Help?

  I use Adobe Premiere Pro CS6 on a MacBook Air. (I use an external hard drive for files and the project, don't worry). I'm editing an average movie film I already filmed and stored on my hard drive, however the audio is missing part of a clip when I open it in the program. When I play the original video in QuickTime format, the sound is fine. In Premiere Pro, the audio works at the beginning of the clip, then it just suddenly stops at a certain point and does not return. It stops at the same place everytime I play it. I tried to open Bars and tones, and I hear the tone very well. I tried to look at the audio mixer Panel, and nothing is cut or a smaller volume. I double checked to see if the clip is on and it is indeed turned on. As far as I know, there is no other clips blocking audio somehow. I tried to cut the video with the razor tool to see if he wanted to kickstart audio feedback, still nothing. I tried to change the name of the video. MTS of. AVI (tip, I found online), no change. I have really no idea what is the problem, or why the audio is missing. And I don't understand why it affects only part of the clip. The clip is around 10 - ish minutes and audio works for about the first ten seconds, then stops. He's a longer video which is about 20 minutes in the length, clip, that I'm getting is the last half of the video.

  If someone could help me with this, I would really appreciate it. It's for my graduation project and it is due in like a month, so I'm a bit required for the moment. If you have any other questions, please send them!

  I can't really give you a reason happens, but I can offer you some options to work around him.

  Open the item in Adobe Media Encoder and export it as a WAV file. See if the Audio is finished. If so, put that in first and make a subelement with the original video file.

  Again, NO idea why this might happen, but rather that why worry... Let's see if we can get your finished project.

  Good luck!

• I have the creative cloud for $60 or anything like that, and I just want to downgrade using Adobe Premiere Pro.  I don't use any other programs and I don't want to pay for it

  I have the creative cloud for $60 or anything like that, and I just want to downgrade using Adobe Premiere Pro.  I don't use any other programs and I don't want to pay for it

  Please refer to:

  FAQ: How can I change to a different plan of the creative cloud?