Adobe Reader error: this application has failed to start because AGM.dll is not found,

Original title:

Adobe Reader

When I try to open a PDF file I get this message: this application has failed to start because AGM.dll is not found, re-installing the application may fix this problem. "When I click OK, it says"Acrobat failed to load its core DLL.

(I reinstalled Adobe 9.3)

If you have Adobe 10 complete and install adobe reader 11 you get the same error "agm.dll not found."  Reader adobe 11 delete and you should be good to go.  You may need to do a repair of Adobe 10 so he can make the updates.

Tags: Windows

Similar Questions

  • Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

    Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

    Hello

    I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

    Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

    See how it works for you:

    If you see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    It is in the case Log:

    Event type: Information
    Event source: Application Popup
    Event category: no
    Event ID: 26
    Description:

    Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

    You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

    If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

    You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

    The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

    Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

    You also will be able to properly run a browser on the system afflicted to go on Internet download one.

    There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

    You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

    If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

    When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

    Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

    If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

    TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

    If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

    Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

    That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  • Error "this application has failed to start because iertutil.dll was not found" on startup

    original title: iertutil.dll problem

    I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after you start windows xp. It is constantly after I have trying to login or close. Shortcut buttons, start menu, everything on my desktop disappeared. I tried to open the box of the Task Manager by pressing Ctrl-alt-delete, but this is as far as going to my knowledge. Can someone help me solve the problem please? did askme to download any kind of things because I don't have any access at all.

    Thank you.

    Quimbee

    Hello quimbee,.

    In addition to the response of Naman R, please consult the link below if you are still having problems.  Please follow the steps to Joselbarra and let us know the status.

    When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/system-has-failed-because-iertutildll-was-not/6dd913ba-cc0f-4828-a55a-477771d25b66

    Thank you

  • error"this application has failed to start because GD132.dll was not found.

    If I try to open all the files or download anything I get this message: could not locate component this application could not start because GD132.dll was not found, reinstalling the application may fix the problem. Ive done a scan and have no viruses, but I can't open anything my system restore does not work just intern it

    Hello mwbug,

    Would you like to take a look at this link: http://pcsupport.about.com/od/findbyerrormessage/a/gdi32-dll-not-found-missing-error.htm

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

    Original title: this application has failed to start because apphelp.dll was not found.

    A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

    "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

    that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

    I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

    AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

    AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

    I tried Recuva, but he could not find the file.

    How to re - install a such apphelp.dll suggested by the pop - up error message window?

    Thank you

    I thought it would be something that began with "A".

    For low overhead and free, think of Microsoft Security Essentials (MSE).

    MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

  • I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

    I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

    Hello
    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    Methods of resolution:
     
    I suggest you to download windows desktop search for additional and install.

     
  • message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

    I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

    Hi vlademer,

    D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

    Follow these methods.

    Method 1: Follow the steps in the article.

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

    This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

    The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

    Hi Kathy,

    1 have you made changes to your computer recently?

    2. When you get this error message?

    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    I suggest you to follow the steps and check if it helps.

    Method 1: Uninstall and reinstall Windows Desktop Search

    The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

    To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

    Step 1: Remove Windows Desktop Search from the boot sequence

    To do this, follow the steps below:

    a. click on the start menu, click Run.

    (b) in the Open box, type msconfig and press ENTER.

    c. in the System Configuration Utility dialog box, click the Startup tab.

    d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

    e. restart your computer.

    Step 2: Uninstall Windows Desktop Search applications

    To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

    a. click the start menu and select Control Panel utility.

    b. double-click the icon Add / Remove programs.

    c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

    d. press the button Delete.

    e. restart your computer.

    Method 2: I suggest do you an online scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • "This application has failed to start because iertutil.dll was not found.

    Whenever I try to open any application that is installed on my laptop, a message appears saying that "this application has failed to start because iertutil.dll was not found. He said little other than those.

    This started after I tried to solve another problem on my laptop. Last night, I installed updates, before turning off my computer. This morning, my computer freezes completely after I turned it on. Finally, he stopped long enough to get a screen with the message of freezing "configuration of updates: stage 3 0f 3-0% complete, etc.» I tried to work around this problem by using a solution when searching online, I found the problem. The solution had me select 'repair your computer' when the laptop has been turned on. He had me open a command prompt and rename a file called pending.xml. Thereafter, I could connect fine, but then the problem iertutil.ll is born.

    Almost everywhere I looked, I found only users of Windows XP with this problem and most of th proposed solutions require windows Explorer to work (which is between th many applications on my computer which is adamently refused to work). If you can help me, so I canassure you it will be greatly appreciated.

    Hello

    ·        What are the updates that you tried to install on the system?

    Let us know the number of KB updates. Follow the steps mentioned in the link given below to check updates are installed on the system.

    Install Windows updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Iertutil.dll errors are caused by situations that lead to the removal or corruption of the iertutil DLL file.

    Apart from this, follow the steps mentioned below.

     

    Method 1:

    I suggest make a SFC (System File Checker) scan on the system and check if the problem is resolved.

    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    b. click on continue or provide administrator credentials if prompted.

    c. in the type in the following command prompt window and press ENTER:

    d. sfc/scannow

    e. you should see the following message on the screen:

    § Begin the analysis of the system. This process will take time.

    § Beginning verification phase of system scan.

    f. % verification complete.

    g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article mentioned below.

    http://support.Microsoft.com/kb/929833

    Method 2:

    I suggest you do a clean boot and see if the problem still occurs in clean boot mode.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: when you have completed the installation, follow step 7 to start the computer in normal startup.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

    If your computer does NOT connect to a corporate network:

    • What changes have been made recently to your network hardware/software?
    • You have a home network? Wired or wireless?
    • How is your computer connected to the Internet?
  • "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Original title: SiSUSBrg.exe

    "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Hope that this is not a virus!  Help?

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353
    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • applesyncnotifer has stopped working unable to locate the component that this application has failed to start because corefoundation.dll was not found. Re-install the app

    Original title: applesyncnotifer has stopped working

    pop-up that said, apple syncnotifer.exe cannot locate the component.  This application has failed to start because corefoundation.dll was not found. Re - install the app may fix the problem.

    Hello

    It's all part of itunes

    Uninstall and reinstall itunes

    Follow the information from apple to the link below

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    and or ask for their support of itunes

    http://www.Apple.com/support/iTunes/

    Also try the discussions of apple itunes

    http://discussions.Apple.com/category.jspa?categoryID=149

  • Error when you try to start MSN Messenger: this application has failed to start because d3dx10_41.dll was not found.

    When I try to run MSN Messenger I get the following message is displayed:

    "THIS APPLICATION has no PU START BECAUSE d3dx10_41.dll was NOT FOUND".

    What should I do to fix this?

    Hello

    they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

    http://windowslivehelp.com/product.aspx?ProductID=2

  • Can not download the game, Grand Chase downloaded ACE fails with the error, the application has failed to start because nspr4.dll is not found

    I am trying to download the great chase game fails the low loader & I get this message... This application has failed to start because nspr4.dll wasn't found.re - installing the application may fix this problem... I have installed lotsa things to try & take... but have no idea what to do... my friend lent this PC... it worked great before that... but I guess that one of the idiots that we after it went out of this House missed something in place.. Please... How can I get that file back...

    Hello

    What was the changes made prior to this issue?

    I you suggest to put the computer in a clean boot state and then try to donload and see if it works.

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    I also suggest you to reinstall the program/game and check if that helps.

  • "This application has failed to start because 3ivx.dll is not found." is the error message I get.

    How can I get my file 3ivx.dll to work, or how to download a new one?  I couldn't find programs that I need to buy to fix this, and I'm not willing to pay for something that should already be there.  Can someone give me a simple and direct answer to this frustrating problem?

    I was wondering... did you already install the 3IVX decoder?
    If_Yes_it may have been a 30 days trial version which has now expired.

    Or... it could be a trial version included in your OEM software package.

    It was not included with the Windows XP operating system and where
    I know... is not free.

    The following links may be worth a visit:

    Unable to locate component
    http://www.Google.com/support/forum/p/Picasa/thread?TID=2a7b50206721f0ff&hl=en3ivx.dll not found error resolution
    http://pcsupport.about.com/od/findbyerrormessage/a/3ivx-DLL-not-found-missing-error.htm

Maybe you are looking for

  • HP officejet d155xi - need driver for windows 2003

    Hi all I need your help. I have a hp printer officejet d155xi and need to install it in the Windows 2003 operating system but, unfortunately, theres no driver available for Win 2003. Are you able to provide me with that. Your help is really appreciat

  • Can be hacked through network?

    I did not allow for location information, which is very typical of a person like me, private I bought what I pad in New York and the United States used, connected only in front. but. I started using this in my country, YouTube, yahoo then shows my lo

  • Skype crashing whenever I start it.

    After that I updated to Skype to the newest one, it crashes whenever I start it. I tried to look for further discussions on this forum and tried like 50 different things (IE cleaning, decommissioning, IE, etc etc) now the problem is, Skype 6.14 works

  • How can I change explore the way Vista...

    1. How can I change the way to Vista Explorer (NOT Internet Explorer) highlights a selected item or folder?  At the moment it is transparent and not discernible from the background.2. is it possible to have Vista's Explorer expand a folder with a sin

  • Share photos in a network - error code is 0x80070005 'Windows cannot access the named computer.

    Implement the new network with router, I share files, but when I have a computer to share with the list, it does not recognize the network!  I have been online with Linksys for 2 days now, please notify