Advanced registry optimizer reports many errors after Microsoft updates

I recently downloaded 22 this so-called upgrades and installed on a computer with zero (0) errors before downloads.  After the download and installation of my Registry Optimizer program advanced recorded 266 errors as follows.  Active X and com = 16 errors; Types of files = 12 errors; history = 1 error; software = 50 errors. and Deep Scan = 187 errors.  My computer would be difficult to restart and was so slow to respond that I couldn't believe it.  I managed to run the Advanced Registry Optimizer, which exposed the errors and he was able to fix everything, but 3.  Is this a result of sloppy programming or what? I don't know if I have to use microsoft update programs again. Any comments?

Moved from feedback

Original title: errors in the downloads and upgrades

Hello

http://answers.Yahoo.com/question/index?QID=20080531044554AA5HGCi

http://answers.Yahoo.com/question/index?QID=20100613185256AAPkQDN

There are some bad reviews about Advanced Registry Optimizer.

And a modern operating system does not need a cleaner registry to serve thereon.

These cleaners registry and TuneUp Utilities can do more harm than good as they claim to be able to make and they find errors in your operating system to justify their cost and their existence.

See you soon.

Tags: Windows

Similar Questions

  • Advance Registry Optimizer 2010 is installed but does not download it

    aro2010 appeared on my desk and has been downloaded not by me.  It is said that it is locked.  Can I use unlock?  It was created on 09/19/10.  This set for a week my computer is slow and my email one sort of spam or virus to many people in my repertoire.  All problems could be linked to this aro2010?

    Hello

    Advanced Registry Optimizer 2010 is itself probably malware, a program of poor quality if not
    an out right scam you to pay while it offers little or no benefits at all.

    ---------------------------------------------------------------------------------------------------------

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Impossible to uninstall Advanced Registry Optimizer as installation is corrupt

    Original title: I'm trying to uninstall a program that says installation is corrupted: Advanced Registry Optimizer

    The reason why I went to intall, it was because my computer settings changed suddenly and my computer says that I have a disconnected local connection: Realtek RTL8139/810 x Family Fast Eth. When I studied this program, I was prompted to install it - but it turned out to be the Advanced Registry Optimizer. First of all, I need this program? Second, how to uninstall an installer corrupt and three, why has it changed my settings? I guess the most pressing is to uninstall the program. But I'll take any help I can get.

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    See you soon.

    Mick Murphy - Microsoft partner

  • R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

    R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
    This message is pop:
    Microsoft Visual C++ Runtime library
    Runtime error!
    Program c:\windows\helppane.exe
    R6034
    A request made an attempt to load the wrong C runtime library
    Please contact the support team of the application for more details
    This message appears as soon as the machine restarts
    Happens if I try to run Skype
    There is no problems until the updates have been installed
    This problem is urgent that this computer is used for a company
    Thank you
    David Schlachter

    Hello

    In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

    Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

    Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

    Then uninstall and reinstall the software Skype and check.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR: NTVDM CPU has encountered an invalid statement." Close to terminate the program.

    I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!

    fl0bot,
    The message you are getting means that there is some corrupt system files that could not be fixed.  If you look in the CBS.log file , it should tell you which files.  When you do that, you can try to replace the corrupt files.  However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them.  Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Yahoo emails do not flow to Windown Live Mail after Microsoft Update

    Never had a problem with my account yahoo email to windows live mail, but after a Microsoft updated Jan. 1 it now no longer works. Get the following error message:

    Server: 'pop.mail.yahoo.co.uk '.

    Windows Live Mail error ID: 0x800CCC0E

    Protocol: POP3

    Port: 995

    Secure (SSL): Yes

    Socket error: 10060

    What do I need to do this job again?

    I don't think that this has nothing to do with Microsoft Update. Yahoo have recently updated their servers and you need to change your settings to match.

    Right-click on the account name in the folders pane, and then select Properties. On the servers tab, change the server addresses to match those listed on this page: the pop server settings While you're there, make sure that my server requires authentication is selected and that the ports are correctly selected on the tab Advanced , with this server requires a secure connection (SSL) selected for both.

    Click on work offline and delete all messages waiting for the Outbox (below the records of account in the folders pane), and then compose a new test message and send it to yourself. Send error messages in your response.

  • Vista system locked up after Microsoft Update

    Vista system crashed after installing Microsoft Update July 3, 2013 10:15.
    Went to safe mode and system restore went back to last night.
    Always locked.
    Do you have another restore to last Sunday - 30-06-13.
    Always absolutely locked.
    Do you have the last known good configuration.
    Always without success.
    Make me very worried at this point.
    I think it was an update for the dot net.

    Success!
    Method 2 - uncheck the Microsoft services, etc. - did the trick.
    Thanks a lot for your help.

  • Key of blackBerry Smartphones advanced ram optimizer-pro license error message

    Hi all

    After the purchase, I received an error message so I did not receive my license key and the application has not been installed.

    How can I get the license key now and install?

    Help please!
    App in question - Ram Optimizer-pro Advanced

    Hello

    If the application was not the AppWorld, then you must seek assistance from the place, you bought the app. But, if the application was purchased through AppWorld, then I suggest that you clear the cache of the AppWorld application:

    1. open the App World

    2. go to my world

    3. follow one (and only one!) of these steps:

    3. for the BB keyboard-oriented - hold down the ALT key and press on, in the sequence R, then S, then T

    3B. for touch screen only BBs - hold the num-lock (! 123 button) so that it hangs and then press on, in the sequence 3, then 4, then)

    3 c for the most recent (e, g., OS6 and 7) BB s, see this KB:

    • KB24714 How to clear the cache of BlackBerry App World

    4 AppWorld must close.

    5. If your BB locks after issuing clear cache, do a battery pull reboot

    6. return to AppWorld/MyWorld (it can be slow, while it re - sync).

    If (4) stage arrives not as described, then the empty the cache failed.

    The purchased app should now display as uninstalled, and you should be able to install it from there.

    • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

    For more information, registration keys, see this KB:

    • KB18646 How to locate and enter the license key for an app purchased through BlackBerry App World

    I hope it'll work for you! Good luck and let us know!

  • CAPI2 event ID 11 error after installing updates on Vista computer

    Updated Vista and question CAPI2
    After the automatic update this week, restarted machine, I logged normal, but the display is in classic mode instead of Vista Aero. I also got the message pop up on the no connection to Event Services and certificates third invalid.

    I have checked the event viewer and see the CAPI2 ID 11 errors. I have restored and the previous checkpoint and versions updated again several times with the same result.

    I've seen previous problems of CAPI2 asked on the forums, but none with the symptom of classic view.

    Any help appreciated.

    Hello

    Scan a file system (CFS) checker on your computer and check if it makes a difference. Scan SFC will Windows replace corrupted or missing system files
    on your computer.

    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow

    Refer to this article:
    http://support.Microsoft.com/kb/929833

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Blue screen after Microsoft Update

    Hi-
    On Tuesday morning, 25/08/09, Microsoft began offering the KB973879 update.
    It seems that some people get the bluescreens may be responsible for this update.
    While this issue is being developed on, you can run a system restore.
    Please read this document to learn how: http://support.hp.com/us-en/document/c00807369
    After doing a system restore, you don't want to reload the same update again, there are two ways to prevent reloading of this update.
    One: go to the Windows update configuration and change to automatically install to the "ask me" option. Now, you will get manually choose which updates to install. Quite simply, do not choose to reinstall the KB973879 update.
    Two: find the KB973879 update in the list. Right-click on it and choose 'Hide '.
    In any event, you should be able to get your other updates and keep the computer
    Remember that this is just a workaround.

    Message edited by Bookworm on 26/08/2009 11:02
    Message edited by Bookworm on 26/08/2009 11:03
    Message edited by Bookworm on 26/08/2009 11:15

    Another good suggestion, I had to post that timnovak is less, BTW, it seems that Ms have disabled the update so you should be good updates made after you run the system restore or remove the update.

    "I thank very you much for this information.  Saved to return the Pavilion dv7-2185dx that I bought yesterday.
    As soon as I turned on the machine, I did the updates of Windows, as I always do and then a blue screen.
    Spent many hours since last night trying to solve cela.
    However, you are proposing to do a system restore and then reapply the updates that will take an hour or two, perhaps. can I suggest that instead do the following:
    Click Control PanelClick on programs and FeaturesClick view installed updates on the left sideFind update you mentioned (just look at the article which was pointed out above).
    Click on uninstall
    Restart when prompted
    It is essentially the same thing that has been mentioned above, but saves a lot of time.
    Especially if it's a new computer and you have a lot of updates like me.
    Anyway, thanks again for the information display.  It was a huge help! »

  • SD card memory Slot is not working after Microsoft Update.

    Microsoft,

    I just downloaded and upgraded my system because I was working with a problem with the beta of Windows Live Writer w4 and after updating the SD memory on my computer no longer works.

    I just used it [Microsoft Director] to access the video/video editing before the update/reboot and now find confuse does not work. It does not even appear as an active device. The drive letter for the sd memory shows ever upward.

    I need to know how to solve this problem... Microsoft.

    My Machine features:
    Acer Aspire x 1200
    Dual Core 4850
    4 GB 6400 DDR Mem
    Integrated NVidia 8200 video card
    320 GB HD space
    Vista 64 Home Premium [all latest patches]

    Thanks in advance and I appreciate...

    Until next time,.
    LEHenryJr

     

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understand the Extras in Windows Vista and Windows Update info is at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon

    Mick Murphy - Microsoft partner

  • build 7601 error after automatic update of the software

    When I stopped my laptop I saw 6 Windows load updates automatically. Today, I get a message "Build 7601 this copy of Windows is not genuine". I have not recently installed new software. I tried to get the product key on the COA sticker on my laptop (title on the sticker - Windows 7 Home Prem OA) but who is rejected as not a valid Windows 7 key.

    Laptop is a Pavilion DV6 bought in March 2011, Windows SP1 version

    Update:

    After reading a lot of posts on many forums I tried to check the validity of my version of Windows with microsoft. Result is "thanks for trying the evaluation copy, buy the full version now!

    I clicked on the link that says something like, "purchased the software preinstalled by the vendor" and it recommended to go through the process of change product key. I already did, but this time I found that a character on the COA sticker was in fact a B when I had read previously as an 8. Problem seems to be resolved

  • Layout error after Windows Update.

    Original title: name of the event: AEAPPINVW8

    A few days ago I leave Widows Update install the latest Intel graphics HD on my laptop Compaq CQ58 drivers and now I continue to see this error, but I can't find a solution

    Log name: Application
    Source: Windows Error Reporting
    Date: 29/01/2013 19:30:20
    Event ID: 1001
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: JohnDavis
    Description:
    Bucket-1214533122 of error, type 5
    Name of the event: AEAPPINVW8
    Answer: No available
    Cabin ID: 0

    Signature of the problem:
    P1: 101
    P2: 2
    P3: 6.2.0.0
    P4: 2057
    P5: 84
    P6:
    P7:
    P8:
    P9:
    P10:

    Attached files:

    These files are available here:

    Symbol of the analysis:
    Recheck for solution: 0
    Report ID: 5081d6a7-6a4a-11e2-be9b-b4b52f374598
    State: 0
    Bucket Hashed: 328295ae9ddefe8d2e778532cda43422
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        1001
        4
        0
        0 x 80000000000000
       
        9718
        Application
        JohnDavis
       
     

     
        -1214533122
        5
        AEAPPINVW8
        Not available
        0
        101
        2
        6.2.0.0
        2057
        84
       
       

       
       

       
       

       
       

       
       

       
       

       
       

       
       

        0
        5081d6a7-6a4a-11E2-BE9B-b4b52f374598
        0
        328295ae9ddefe8d2e778532cda43422
     

    Get the AEAPPINVW8 error, it also comes with an update of windows WindowsUpdateFailure2 response: signature of the problem: P1: 7.8.9200.16465, these two errors that will eventually trigger this error error 51893170 bucket, type 5 name of the event: MemDiagV1

    These errors may not appear in a search on your computer, but will be visible in a DxDiag report. To run DxDiag, windows key + R, type dxdiag and save to the desktop. Read the text file on your desktop. Errors will be displayed at the bottom of the report under Diagnostics.

    What are these errors is to errors of memory. Windows 8/8.1 comes with virtual memory to factory default. If you have more ram than the settings factory you must change the virtual memory to match the ram in your computer.

    search for images on your computer, programs and you will find how to change the size of virtual memory

  • Graphics error after latest update

    Windows 8.1 970 GTX graphics card. I get an error message:

    "Illustrator has detected an error with your material or graphics processing software and went to the preview of the CPU."

    After the most recent Illustrator happned updated 18/07/15

    has worked well before.

    so boring.

    Hello

    I'm the technical team of the Illustrator.

    Starting 19.0.1 we implemented a back drop in CPU errors of OpenGL. There are various reasons why an OpenGL errors may arise from issues implemented in Illustrator, bug in the drivers, the lack of memory in the GPU to render the content, an error of computation on the GPU or even a bug in the OS etc...

    The reason why we have implemented a back fall with 19.0.1 is to prevent undesirable rendering problems when these errors occur. Please click on does not show them the check box and continue to work on Illustrator. Illustrator turn off automatically the GPU acceleration momentarily when it detects an error. This momentary exit ramp is applicable only for the current session. The next time you start Illustrator, we will try to reuse the GPU.

    With Apple and Microsoft we also work with different hardware vendors such as NVIDIA, AMD, and Intel is to get these issues resolved or to implement workaround in our own product.

    If you get a fallback error please let us know of your file by email at [email protected] . Please reference this thread in your communication. Get us this investigation and see how these situations can be handled better.

    Thank you.

    Kind regards

    Ashutosh chikh

  • dragnkl1.dll missing please reinstall error after CS5 update

    After the recent update to CS5, the next time that I started CS5 got me a cannot start... dragnkl1.dll... reinstall missing error.  I can roll back the update or is there a fix for this problem?  I really have time right now to do extensive troubleshooting as I am in the middle of a job.

    Thanks in advance for the help.

    There are two ways to fix it

    First of all:

    You need to copy:
    Dragnkl1.dll
    NSSLang4.dll
    StdFilters2.dll
    Strato3.dll
    From:
    Scan C:\Windows\twain_32\Nikon\Nikon 4.0
    TO:
    C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5

    Second:
    in the system of the advanced settings in Control Panel, you need to change the value in the environment variables for the variable 'Patch '.
    Add: «;» C:\Windows\twain_32\Nikon\Nikon Scan 4.0 ", at the end of the line.

Maybe you are looking for