Advantage of ink HP Deskjet 4645: printer does not print not my PC.

Similar Questions

• Advantage of ink HP Deskjet 1515: print but not scan

  Hello world

  I am using HP Deskjet Ink 1515 advantage and when I am trying to scan a page or a picture, shows the following error: the HP Deskjet series 1510 was not found. This is something that has happened today and never before.
  Although the error shows that the device is not found, I can normally print with it.

  I would appreciate all the advice really.

  Thanks in advance.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. start by dissconnecting the USB cable.
  2 remove the printer driver of "devices and printer" which is located in Control Panel.
  3. Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the solution complete for the HP Dj 1515 series.
  4. extract the contents of the file.
  5 open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.
  6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  7. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  8 follow the steps for you, and connect the USB cable when prompted to.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• advantage of ink HP deskjet 4645: noise of printer

  New printer, hp deskjet ink advantage 4645 has started making a strange noise. This noise changing field as he climbs and goes down swinging.
  When the printer is turned on, the noise becomes quite heavy and boring. The sound is still audible when the printer is in the position of however it is less strong. When the printer is connected to the power outlet but off the noise can still be heard if the room is silent. The only time where that noise disappears when the printer prints, it is just after printing finishes.
  Sine the printer is in my room, that I can't sleep without unpluging it every day. Very annoying. Many others reported the same problem on other models

  If its brand new you all just return it and get another new printer.

  If you wait too long you will eventually talk to HP support and they will probably send you a refurbished machine to replace.

  If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.

• Advantage of ink HP deskjet 1515: why does my printer print fonts that are so small even read?

  So I bought this printer about 3 months ago and everything went smoothly... But last night when I tried to print a slide power point, it prints all of a sudden the texts which are so small... In fact I put it for 4 days by sheet until I print it, but then when I print, everything was compressed into 1 A4 paper... As I can't do anything... I tried to print other documents from ms word, but also have the same problem.

  @Adeanna

  Welcome to the Community Forum of HP.

  If I understand the question, then the problem MIGHT be that "Scale to fit" may be active and should be DISABLED on preview before printing.

  Printing PowerPoint: slide c. size printer Page size

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• advantage of ink HP deskjet 2545: printing problem

  Sometimes when I print or copy, the result is correct, but sometimes it copies and prints only like 1/3 of the page. I tried to uninstall and reinstall, stopped, but the problem always arises. Is the quality of the influential paper on the print job? Sometimes, when I want to print something, pptx pdf or doc, it will print only 1 page then it stops, as he finished. But when I see the impression of doc, it is said made when in reality it is not

  Hi @maleyhalim

  paper and/or the quality of the paper can certainly affect print quality. Please use the following document to solve the problem; Fixing the problems of print quality for the printer HP Deskjet 2540 and Deskjet Ink Advantage 2545 all-in-One Printer Series.

  If the problem persists, I suggest that we call. Do not hesitate to call, even if the printer is out of warranty maybe, cartridges could be as collateral; so, it would probably be a fee for telephone assistance. We will, at our discretion, either replace products under warranty proved to be defective or refund the purchase price.

  We could even determine after the troubleshooting that it's a problem with the printer, in which case they may offer you a discount on a newer model.

  The number to call is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  To find the 'End of warranty' date, look in the following table for the location of the date on each product. The date follows the YYYY/MM/DD or YYYY/MM, where YYYY is the year, MM shows the month and DD specifies the day.

• HP Deskjet 2512 Director does not work on Windows 7? Is there a solution?

  HP Deskjet 2512 Director does not work on Windows 7? Is there a solution? Everything that happens is two pages of text, open, but no Director. I downloaded and installed the latest version of the software full version DJ2510_1313. No help for it?

  Hi DJ2512,

  I understand that you have a Deskjet 2512 which is not able to open the Printer Wizard, it opens to text pages. I'm sorry to hear that, but I'll certainly do my best to help you!

  From what you described, it seems that your printer wizard opens to a page of the Notepad. I suggest you follow this document Opens Assistant HP printer with an error in Script or in Notepad to get the problem resolved.

  Hope this helps, have a nice day!

• HP Deskjet Ink Advantage 4645: ePrint does not work

  I bought HP Deskjet Ink Advantage 4645. Start ePrint feature is impossible.

  I do the following:

  (1) press (ePrint) buttons at the front.

  ((2) I get a failure... as ' proxy or Internet to check connection settings).

  (3) given that I see the work perfect Internet connection, but on the settings, I found that there is no value of proxy and the port is 0.

  I live in Greece (maybe the functionality is supported by my country?)

  Thank you

  Hello

  I hope that you were trying to save the printer directly from the front of the printers, this is an additional method to enable the web service.

  Once you connect your printer with the cable network, let the printer get the IP address.

  Now plug your laptop or your PC in the same network.

  Type the IP address of your printer in the address bar of the browser and hit enter.

  Now, you will see the embedded Web Services Page.

  Access the Web Service tab and click Activate or click the eprint on the façade of the printers and proceed with the registration process.

  Now, the printer must be turned on and print a sheet with the claim code.

  NOTE: If you don't see the Embedded web services page, try unplugging all other devices out of the laptop and printer, then restart the wifi, the printer should pick up the IP address and connect to the internet.

  Your Internet service provider must be able to provide the settings of proxy for your network if its still does not.

  Kind regards

  Oliver

• Advantage of ink HP deskjet 5525: I can't find the ink cartridge for my printer

  I bought a printer HP deskjet ink advantage 5525 in Saudi Arabia, then I brought it to the Philippines, I found the same ink cartridge for the printer here (655 in Saudi Arabia, in the Philippines, it is 685) but the problem is my printer rpet ink, I bought is not compatible. What should I do? Thank you

  Hello

  You must contact HP Office in your country now and ask them how to reset the printer to allow to use inks in the new country. Please read:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• M2Q28A: Deskjet GT 5820 does not correctly print legal paper size.

  The printer does not print correctly if I change the legal paper size it says paper mismatch. a procedure that I didn't change default paper size. then I change th EWS configuration too but the problem is still there. Please help me.

  My operating system is windows 7 and 10 please help.

  Hi @S3dnnie,

  Thanks for getting back to me.

  I was looking at the specifications of the printer HP DeskJet GT 5820 User Guide and it doesn't list legal document as a support for a type of paper supported, but if it has legal papers for a paper Type in the menu drop down, it should be able to print.

  I download and run the HP print and Scan Doctor to check the printer software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes or if you need further assistance.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• my printer is a hp deskjet d1660 it does not print

  my printer does not work ive tried all, all troubleshooting sulotions and no luck.

  I think you need a printer, not a witch of the Printer Wizard.

  What happens when you try to print?  Paper through the printer? He worked previously but does not now?  The ink cartridges are blocked?

  If you go to the Windows Control Panel, then select printer properties and then click View devices and printers and then right-click on your printout, you can print a test page by clicking the button print a Page of text?

  -Hope this helps.

  Doug Robbins - Word MVP,
  DKR [atsymbol] MVP [dot] org
  Posted by the community bridge

  "elliebelly1" wrote in the new message: * e-mail address is removed from the privacy... *

  my printer does not work ive tried all, all troubleshooting sulotions and no luck.

  Doug Robbins - dkr [atsymbol] Word MVP MVP [dot] org

• DeskJet 612 c does not print all of a sudden

  Printer is used almost every day without any problem.  Now, when a document is sent (still a test page), the printer prepares and takes hold of the first sheet of paper, the transport of the cartridge moves all the way to the left and then it just hangs.  The abstract/paper LED button flashes.  Have clear tail print the document.  The only way to clear the flashing light is to turn the printer power off, then on again, maybe twice, for the return shipping and once more light to pass through.

  Similar to that, by lifting the lid of the printer, carriage moves to the Center as usual, the blinker lights up, but just close the lid does not send the return transport.  Crashes in a similar way, have to deactivate etc even once.  The cartridges are sitting very well, paper and the plateau on top are in place correctly.  I unplugged unit, watched inside the pieces of paper or anything which could be signaling a paper jam, but nothing.  Can you help me?  It has been a great printer so far.

  Doesn't seem to be a software problem.  It works on the computer Windows 7 emachines, running under AOL for years very well especially a parent, but my unbound print labels with a laptop computer.

  The solitons does not solve the problem. Replace old cable style printer with a USB port, is gone with a gun for the price on a HP and cartridges are cheap as well.

• HP 7260 do not print it has ink and paper test page does not print

  Page test print but usually works printer CPU does not communicate with the printer

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP Deskjet 2050 A does not print

  no error message

  test paper does not print

  printer is ready

  We port is used

  Hello

  1. What is the operating system installed on your computer?

  2. don't you make changes to the computer before the show?

  Please follow the steps mentioned in the links below

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• DeskJet 1050 J410 does not print.

  Hello. I am using Windows XP SP3, Firefox running. My printer does not print anything except the diagnostics page and the self-test. I deleted the printer and reloaded the software from the CD provided by HP. The printers and Faxes folder show the printer as loan. I restarted the PC, nothing helps. I hope someone can advise me. Thank you.

  Fixed a problem with the download of the software suite of HP rather than CD supplied with the printer. Thank you.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!