Advised that PC does not reconise the USB hard drive or extertnal

Similar Questions

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• My computer does not recognize the external hard drive that my virtual machine is stored (continuous thread solved problem)...

  A new problem arises.  After I crossed the wire attached and mounted my VM on the external hard drive, I can access is no longer my hard drive.  Y at - it a trick to recognize again?

  http://communities.VMware.com/message/1166805#1166805

  Ben, well talk to you again and let me know what external drive you eventually buy and if it was the controller or the drive in the other external drive.

  Woody

• Windows 8 does not recognize my USB hard drive after an unsuccessful backup.

  Separated from this thread.

  tried both methods. Unfortunately does not work...

  Hi Roby,

  Thank you for the update on the related question.

  This issue may be caused if one of the many reasons as USB driver are corrupt or unstable PC requires an update for problems that could conflict with an external USB hard disk, Windows may be missing other problems hardware or software updates.

  Try these methods and check.

  Method 1: Uninstall and reinstall the USB controllers.

  Try reinstalling the Device Manager USB controllers and check.

  Uninstall and reinstall the USB controllers will not affect the USB port, as when restarting the computer/laptop as it gets reinstalled automatically.

  1. Press key Windows + X on the keyboard.
  2. Go to device Manager.
  3. Expand the Controllers USB, click drivers.
  4. Click Properties, click the Uninstall tab.
  5. Click OK.

  If the problem persists, follow method 2.

  Method 2:

  See the Microsoft support article and follow the steps.

  Install USB 3.0 and other USB devices

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Satellite L305D-S5881 does not recognize the new HARD drive

  Ok. I've had this laptop for a while now.
  It crashed recently. So, I tried to start it up.
  I got "Winload.exe missing or damaged".

  Fortunately, I found an answer to this!
  I got the Vista installation disc and inserted.
  I had this "PAGE_ERROR_IN_NONPAGED_AREA". I fixed too. Stick of 1 GB of RAM to my computer was bad.

  So I replaced it. And during the installation, it hangs. And beeps and undesirable.
  So I thought it was my hard drive. I have a new. (http://www.toshibadirect.com/td/b2c/adet.to?poid=431567 please TAKE a LOOK BEFORE RESPONDING).

  I (try) to install and it does nothing.
  I turn it on and it goes to this page with as my enthernet info. Then I go into the BIOS and it appears. I think I could install it wrong.

  Any help?

  Hello

  I think that the new HARD drive is not recognized, because you have not installed the SATA drivers!
  The new mobile phones support the new SATA controller and especially the drivers are not included in the Windows operating system.

  So, you must first include the SATA drivers before install you the operating system.
  AFAIK the L305D supports an AMD and ATI chipset and SATA drivers must be placed in the ATI graphics driver package.

  On the other hand, you could install the operating system without the use of SATA drivers.
  I think that the BIOS must contain the SATA mode option. Usually it s set to AHCI. Pass this option in compatibility mode and you should be able to install the operating system.

  Cheers mate

• Windows 7 does not recognize the external hard drive

  A WD My Book external hard drive of 2 TB, Windows 7 Pro icon does not appear in the computer but saw the external hard drive
  in devices and printers. Right-click on the icon, no data on the volume, indicates that it works correctly. How can I access and recover
  the data on this external hard drive?

  Someone ran Testdisk and it couldn't find a partition. It might spoil the hard disk being the day the Date 07/07/2013
  Testidisk was executed.

  Any advice would be greatly appreciated! The data is lost forever? Thank you.

  There is no partition inside?

  You can create partitions on the disk management
  type of handle on the search box to the start menu, open the computer management go to disk management
  You should see your disk and associated empty data and you can create a partition for it

• Lightroom does not recognize the external hard drive?

  When I try to import files from anywhere - my office, or a SD - card in Lightroom 4 or now 6 (updated just to see if it would help), Lightroom is the photo file in what I would call an external hard drive of ghost. It creates a second external hard drive file that seems to be a copy of the original. A few weeks ago, the name of external hard drives has been accidentally changed or partially erased when I backup my hard drive without supervision in Time Machine. I'm working on an iMac with OS 10.11.4. At that time there Lightroom could not find any of my files of course! So, I renamed with much attention the hard drive exactly the same original name and Lightroom everything very well - recognized except, I started having this problem of import. When I import a file of the photo, he put it in an external hard drive of Ghost with the same name, size and number of files. If I try to move the file to the real external hard drive where it is supposed to go, Lightroom told me that the file already exists in Lightroom. If I look in my external drive outside of Lightroom, the file is where it is supposed to be. I tried just 'Add' the file to Lightroom, rather than copy or move, and that's okay. I tried to re-pointing Lightroom on your drive. Does not work. The only way I can get the files to go where I want they is to import, then highlight the recently imported file and move it to the folder of the mother. So, I have to move the file into the folder of the mother in the subfolder and then delete the now empty ghost the disk folder manually hard phantom. Help! Is there a way to merge the external hard drive with his ghost (or duplicate)? I can't find anything in the forums or documentation, and when I tried to call tech support, I came across a brick wall which is very frustrating. They said I couldn't get help by phone, I have to use the forums. So, please, let me know what I can try.

  Hello Deborah

  Seems to me this is probably a problem of conflict with the readers in your catalog and LR is confusing where to put images and creates a clone instead. You have to work smart to get rid of the clone disk keeping the images with the same folder structure. If it's a long process, however, I'll try to be as simple as I could.

  To do a test at White folder on the drive itself out of Lightroom that must be maintained at the same place where the main images folder (main folder means - the very first folder under your player in your catalogue which should include all subfolders on the disc itself), then put a picture in the test folder and import it. the test folder will be part of the new drive of clone in catalog you would then move the main folder of the Original disc to the Clone drive in your catalog. Once you are done with the displacement of all the structures of folders in the test under drive clone folder. The original drive that was not identified by Lightroom would be gone if this isn't the case you can remove it manually and this is how you would leave with single drive with all your files/images existing and if you try to import the images now. They would go directly in the same destination folder that you choose on the screen to import instead of going in any drive clone/ghost.

  Thanks Deborah for bringing This issue to our view. And I amso glad I was able to solve this problem for you on call.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

  Hello

  I bought a new USB (attachment 4 GB) Flash drive.
  And I had a problem installing it.
  The same drive Flash was wel work with my friends laptop that has windows XP only.

  Someone of you can give me a solution for this problem.

  Concerning

  François kervevan

  Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
  Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

  Good luck

  By the way; If you use Vista on your laptop, please update the last State and also install this patch:
  http://support.Microsoft.com/kb/941600/en-us

  Good bye