Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

Similar Questions

• After the last update, everything has much too big for the screen

  After the update everything was too big for the screen. I can't have enough on the screen to play a game even. I revert to a previous version and it was ok, but once again when the update went thru it's still too big. I tried to check and he said: I'm always on the 96 dpi.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Can I see all my favorites in the Favorites bar, even if they are too many... I want to make additional lines and continue, instred of the arrow/list system.

  I would like to have instant access to all my favorites that I keep my RSS links and ongoing projects there. When they are too many to fit into a line across the screen firefox makes a small drop down menu at the end with everything else in. I find it really boring, it's just the same thing as the bookmarks menu normal; I find it really hard to keep things organized when I can't see all the time. I would like to make a second or even third place in the toolbar, so I still see all my current RSS feeds and Pages. Can I do this? If this does not work on firefox someone know another browser FS, BONES or FREE software that will be?

  Try this extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6937/

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

  I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

  If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

  I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

  At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

• It takes about 6 minutes for the computer to boot.

  * Original title: Windows 7 Starter

  It takes about 6 minutes for the computer to boot. I mounted early and disabled now needed to start programs.

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good program antivirus https://toolslib.net/downloads/viewdownload/1-adwcleaner/

  2. I would like to delete all programs that claim to make it work better, safer or faster computer.  The vast majority of them is actually malware

  3. I remove any "protection" software on your computer and let the only Antivirus product quality - more below...

  4. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure

  5. I would like to be sure that none of the drives are more than 75% in use

  6. I would check my memory using the auditor memory Windows 7

  7. I would like to install and run Autoruns to check what is in the startup process

  8. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.

  9. I would like to delete startup programs/applications, unless I really need to start

     Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Roxio anything
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer
  • Dropbox
  • OneNote
  • EverNote
  • All Apple products
  • QuickBooks
  • Spotify
  • Pandora
  • AOL desktop
  • Some games, especially online ones

  What Antivirus buy?

• Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

  Time to compress the video

  I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

  DVD-video is encoded more time-based
  as the size of the file. Compression is not necessary.

  A video file of 100 minutes should fit on a 4.7 GB DVD.

  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  The following freeware can also be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• While trying to look for something on my computer, it gives a blank screen and then start back on the desktop

  I use a laptop HP H250 running Windows 8.0. Since yesterday whenever I search something on the machine it gives a blank screen and then start back on the desktop. An analysis of the system and the registry has verified. Can anyone help?

  Hi Courtney,

  This issue may have caused due to some missing or corrupted files in the computer. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. are you referring to the Virus scan by "system scan"?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you find and fix common system issues on your computer.

  Follow the steps to run the Troubleshooter:

  (a) press Windows + Q together get the search option.
  (b) the type of Troubleshooting on the search option, and then select Troubleshooting.
  (c) click show all on the left side panel.
  (d) click on The Maintenance of the system and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This process will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• My Vista compupter is slow and I cannot open the control panel

  I need to know what to do the comp is so slow the last few days and I can not connect to the control panel

  Hi diannaRasmussen,

  You have made any changes to your computer recently?

  You get the error message while opening the control panel?

  I suggest you follow the given method and check if it helps.

  Method 1: Please follow the steps in the link below to optimize Windows Vista.

  Optimize Windows Vista for better performance

  Method 2: Alternatively, you can try to perform a clean boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 NOTE: Make sure that roll you back changes to Normal Mode after the clean boot troubleshooting

   

  Method 3:  You can perform an analysis of checker (SFC) to file system to check on the corrupted system files.

  Please follow the steps in the link below city to make the SFC scan;

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista is running extremely slow and will not open the Task Manager or connect to the internet

  I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.

  Hello
  Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• v3 takes about 5 minutes so that it starts after you disable all extensions, etc.

  Hi all
  
  I'm trying to understand why v3 SQL Developer takes so long to load up.
  I've searched the forums and made a few tweaks, but still takes forever (~ 5 minutes!)
  
  1 changed in appearance Windows
  2 disabled all extensions
  3. confirm that the "update automatically" is disabled
  
  Anything else I need to do? So most of the actions I take are really very slow.
  One thing I think that maybe that causes are that in TNS network file is huge... but I guess that it would be a success if I try to add a connection.
  
  Any help would be appreciated, because for now, it is not a usable software piece...

  Who thinks so.
  I make a set of those I really need (or even no) and place this file in a different directory, and then point to that one in preferences - - Advanced - Database Directory Tnsnames.

  Hope that helps,
  K.

• How to make Thunderbird out of 10 Windows on the desktop homepage

  My wife just upgraded to Windows 10 and Foxfire, and Thunderbird are absent from the Office home page. We rely on Thunderbird to our email, and I have no idea how to get the Thunderbird account on her computer now. He is hidden somewhere in this new Windows OS (I hate that already!)? Or do I have to go through the entire download and installation and configuration both programs all over again? My wife did not have backups of windows 7 as she should have, so it is not nothing saved which is useful for this purpose. What should I do BEFORE starting the process of upgrade on my PC (which I use now) or my laptop, which continue to run Windows 7? 75 I'm tired of all the current evolving, which none did calculation easier or faster, just more difficult. Give me Windows 98SE - was by far the easiest to use and easy to reinstall and not lose anything.

  Thanks for any help you can offer.

  Changes with the upgrade to Windows 10 depends on the base of Windows. If you have Windows 7/8/8.1, all your programs and files reside.

  For your wife's computer, maybe it's just that the shortcuts on the desktop were removed, but Firefox and Thunderbird are still installed. To check this, open Windows Explorer and access the C:\Program Files (x 86)folder. You can find"Mozilla Firefox and Mozilla Thunderbird folder.

  For your computer, if you want to be more careful, take a look at this support article: back up and restore the information contained in the profiles of Firefox.

  If necessary, download links:

  • Firefox
  • Thunderbird