Aero Peek Thunbnails appears not.

Similar Questions

• The Aero Peek feature does not work on my computer that I've recently upgraded to the version of Win 7 Home Premium 32 bit.

  After you have installed Windows 7 Home premium, I noticed that the aero peek feature does not systematically after a fresh reboot upward. Sometimes when I turn on my computer the aero peek feature turns on immediately and works well. On other occasions when I turn it on it just does not come to the top. I had the box customize and found the checked enable aero peek. Still aero peek doesn't work. So to summarize if aero peek turns on it works fine. However, it does not illuminate whenever I boot my machine eventhough that the box is checked. Please notify.

  Try this: launch REGEDIT, navigate to HKEY_CURRENT_USER and make sure that EnableAeroPeek is set to 1, rather than 0.
  It can help.

• More than 1 file open Excel, Aero Peek will show not miniature, only circles

  Since the critical update from Microsoft last week (26/02/13), when I have more than one file opened in Excel, all I get in the vignettes are circles.  I restored in time before the update and the Aero Peek normally carried out with more than one Excel file is open.  The feature works with more open file in Word, MapPoint and Outlook (all open at the same time).  If there is only a single Excel file open, the Aero Peek thumbnail runs as it should.  The file names appear again, but only spinning circles on the tile.

  Hello

  Thanks for the reply.

  I would like to create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Thank you.

• Aero Peek feature not available

  I have two monitors and for some reason any when I upgraded to Windows 7 I lost the Aero Peek feature, that I really like.

  Based on some excellent suggestions that I did the following:

  1. ran the Aero Troubleshooter and found the Advanced link and the box to the left in the 'ask repairs automatically '.

  Result: He came back with a problem found "Desktop Window Manager is disabled".

  2 I did the following:

  Locate the Desktop Window Manager Session Manager and double click on this service.

  In the Startup Type drop-down, select the Automatic option.

  In Service status , select the Start button.

  Press Apply/OK .

  Exit and restart the computer.

  (I also tried to "Restart" the service)

  Result: Aero Peek still does not work.

  _________________________________

  New information (Finally, reorganized at least)

  I had Aero Peek to work when I disable the driver for my other one.  I have my 2nd monitor hooked up with a USB to VGA and this is the origin of the problem.  My question is, can I buy another video card to get a 2nd monitor port or what I need to buy a video card with support for dual monitors and disable the built in video card?  OR is there an adapter that may make the Aero Peek feature back?

  I downloaded the latest Windows 7 driver for the adapter, but it doesn't always.  The only way to get Aero Peek to work is to disable the driver for the second monitor.
  

  If I go in Panel > appearance and personalization > display > screen resolution I see only a monitor (Samsung SyncMaster 933SNPlus) in the "View" drop-down menu does not show the other monitor.

  I have the other monitor (Dell E176FP) is working on a driver that I got online.  If I in Conrol Panel > hardware and sound > devices and printers it displays an icon for the SyncMaster monitor but it shows TWO additional monitor icons.  They are the same and say 'Generic Non - pnp monitor'.

  If I go into Device Manager and in the "Cards" section, it shows a "NVIDIA GeForce 6150SE nForce 430' and a ' trigger USB Graphics Chipset Family (1 P -E ) and a trigger USB Graphics Chipset Family (1 P -M ).

  I don't know if this helps, but I'd like to get Aero Peek working again if possible.  Windows 7 is the best OS I have used and I can tell that a lot of hard work and great ideas will in it.

  I tried all these things and more, WITHOUT success. HP help line didn't know how. Finally, on another chat site, I found the news that worked!  Go to the adapter in the Control Panel, Device Manager, display. I had 2 mirror drivers listed (the two HP RC - remote control, I suppose).  I uninstalled a (mirror driver right click, left click on uninstall), then restarted.  I got my Aero!  Yay!

• Taskbar does not appear Aero peek, or overview of windows!

  I just installed windows 7 Home Premium and I can't seem to get the aero peek and the preview of the windows in the bar to work...

  Any suggestions?

  (I tried all the settings, but in the taskbar properties, [desktop preview with aero peek] is represented in grey so I can't change the options, and when I put the cursor on IE, it shows just lists of IE Windows opened not previews)

  Control Panel/troubleshooting/appearance/Aero

  Run this will maybe tell you why it's a failure.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Windows 7 - Aero Peek window previews flicker when displayed not allowing not the window selection.

  When I move my mouse over one of the icons in the taskbar much of the time it will not display the Aero peek for windows previews. When he does it usually blinks for a few seconds then does not appear. The odd time, keep it visible it will allow me to get an overview of the windows by bringing to the forefront through one of miniature windows flying over my mouse but when I click to select a window it goes back to what I was on earlier. In the case of multiple windows of the same type, for example to say Firefox and download manager in firefox by clicking on the firefox icon in the taskbar is nothing, until I navigate to and close one of the two windows manually. It became a major problem with my daily use of my computer so much so, in fact, that I returned to the use of Linux Mint during the bulk of my computer daily as it does not take me an excessive amount of time to navigate between windows. If anyone has suggestions as to how this can be fixed it would be much apreciated and would allow me to start using Windows 7 even more.

  I tried to run the troubleshooter several times with no results yet. The driver is up to date and working properly, I tried unintsalling, restart and reinstall the driver 64-bit Windows 7, with no change in the problem. I can try a reinstall of Windows 7 because it won't cause a lot of data loss with separate OS and partitions of data.

• Aero Peek, Aero preview thumbnails do not disappear

  Titles are always difficult, especially in this case.

  The icons on the taskbar - when I hover over them, they pop up displaying the list of windows related to this icon.

  

  Well, after that installation of Windows since long several updates, the list of "pop-up" doesn't go away when I stop hovering over him.

  It's driving me crazy. I need actually to click on something in the list that appears before he goes. If I accidentally go over it while moving the cursor, then he overcome everything that I do until I get out of my way to select an item in the list. The list does not disappear when I click on a window, when I click on an item in the list.

  To look into this further, I think that this only happens when I have enough windows open, but it could be that some windows that cause it to happen. I use these programs for a long time however, and they have never caused-for most things like Sublime text and Visual Studio 2013 Communityand a game or two. I'm sure this is a result of the update of Windows.

  George,

  The term you want, it's Aero Peek [people often refer to it as Aero Preview as well].

  I think that you will have more good users write down your question if you are using the question title - Aero Peek, Aero preview thumbnails do not disappear [just click on the link change under your question and it allows you to change the title].

  Additional: You mentioned the updates, I think you should check for any updates for your display driver, as it seems a likely candidate for such a problem of display.

• Aero Peek doesn't work now does not

  Here's all the sordid details.  Mobile workstation HP 8760w with Nvidia Quadro 3000 M GPU, 8 GB of RAM, Windows 7 64-bit, 128 GB SSD,... etc. 18 months of use, has been remarkable.  Last week, Aero Peek suddenly stopped working. I tried all sorts of things, including the following, without result;

  (1) restoration of the system of at least three different times, earlier (no updates were applied before failing Aero).

  (2) deleted the cache of WIndows Experience Index and re-reun coast at least a dozen times (it must be deleted or it crashes) (result of-7, 1-7.5)

  (3) personalization troubleshooting Aero reports without errors or questions.

  (4) Microsoft FIxIt Aero Troubleshooter says my video can't run Aero (though again, it has 18 months).

  (5) deleted, updated, modified, deleted, updated, changed... For the Quadro 3000 M NVIDIA drivers (even to aid version of HP on their Web site).

  (6) update of the BIOS and other firmware/drivers from HP on this laptop.

  7) opened a case with Nvidia (still in the wait - they ask me if I have uninstalled and reinstalled it, even though I told them that I have 10 times).

  (8) tried to run without Nvidia software installed at all.

  (9) checked for EnableAeroPeek registry entry by many other suggestions and articles. Even some added and then removed the other.

  (10) created a new Admin profile locally on the laptop.

  (11) run a SFCScan and it came back fine.

  Aero options do not appear in the Visual effects and the opton use Aero Peek in the properties of the Start Menu is grayed out.  It sent me down a lot, a lot of articles.  No resolution.  Everyone has been through this pain?

  I'll put my SSD in another laptop as she (we bought 4 of them at the same time) to see if it's related material... but nothing else that seems the Aero affected, so I'm skeptical, it's going to do anything.  I'm just * hope * Miss me something.

  If you have updated your Windows then uninstall the update of platform for Windows 7 (KB2670838) and your problem should be solved.

  Before I updated my Windows this month I just checked if Microsoft still offer this update. This is in the optional list. I installed so I thought to manually upgrade to IE10 because he wasn't in the IE9 update list. So I did manually and after that check updates again and to my surprise this update has disappeared completely. I have an old PC as well, and after installing all the updates I still have no problems so far. I recommend that you upgrade to IE10 after uninstalling this update (if you updated with that and faced the problem) to get rid of the update forever. But do it at your own risk, because I never updated my machine with this defective update and see if that caused any problems with my machine.

• Aero peek doesn't work do not

  Aero peek doesn't work! When I put my mouse on the taskbar at the bottom of my computer, it shows just the words and not the smaller window icon. When I go to the properties of the taskbar, it is gray and I can't enable or disable it. I read some of the other issues people here and I didn't know that Office 2007 can be part of the problem. I have Office 2010 could this be the problem? This air look was one of the features that Windows boasted of and now it does not work? I'm not happy about it and nobody seems to have a solution for it! Why not??? I want answers please.

  You must have the Aero Glass theme enabled to use Aero Peek. Right-click on your desktop, click Customize > select Windows Aero under Aero themes.

  Please see the following thread for additional solutions:

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/39108d91-B455-472c-B144-3e9138e196a7

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• "Aero Peek" selects windows on top, but after a second selected window is coming back, behind other windows. __

  When I use Aero Peek and select 1 window to bring it over the top, he goes there, but after a second, he goes back and hides. Sometimes it is on top a little longer, sometimes it's on the top of page continuous, but especially it goes back bihind other windows. If, during the selection, I press the right button of pouts and use 'move' for selected window-, it helps. This problem mostly appears when I try to select the window which is not maximasied, while the other window/s are maximased.

  I use Windows 7 proffessional with 2 monitors.

  All solutions?

  Concerning

  Jerzy

  Here is an article on how to fix problems with Aero Peek in Windows 7: http://support.microsoft.com/kb/976170.

  If this does not help, please repost in the Windows7 forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why don't my Aero Peek standing?

  I fly over an open program on the taskbar, and the glance stands for a fraction of a second, then goes.  Subsequently, if I right-click a calendar entry in Outlook preview appears and disappears after a fraction of a second.  I think they are related...

  Any ideas?  Its very frustrating...

  Hello

  My first thought is there is a pilot number use this troubleshooting. At the end are methods to check if something interferes with Aero - look if necessary after the use of other methods. Check with the support of the Maker (manufacturer of motherboard for customized systems) system, online documentation and drivers, diagnostics and ask in their forums about known issues (those who are for embedded charts).

  Also check the same resources for video device manufacturer, and if a there is a separate card, such as ATI, Nvidia, ASUS and other OEMs.

  Visit this link:
  
  Visual effects Aero Glass in Windows are not working or displayed
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  How to enable Aero Peek or disable in Windows 7
  http://www.SevenForums.com/tutorials/838-Aero-peek-turn-off.html

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  Also put update or re - install the latest video drivers.
  
  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  =======================================================

  After above, if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work

  I just upgraded a fairly new computer of mine from Vista to Windows 7 Professional.  The upgarde went well however the AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work.  I tried to make the show thumbnails of running programs to display in the taskbar with no luck.  Any suggestions?

  Hi Lisa52465,

  (Already responded to dadams26 in a separate thread and it fixed the problem beautifully).

  Have you tried to run the Aero Troubleshooter? If this is not the case, try this:

  1. open the control panel

  2. go in the system and security category

  3. go to the Center of the Action

  4. click on the link to solve common computer problems

  5. click on appearance and personalization

  6. Select Aero

  He must either correct the errors problem or the State to determine the cause.

  If the Aero Troubleshooter is not the thing, maybe it's just that the Aero feature has been disabled by the update. Try this:

  1. right click on the desktop

  2 select Customize

  3. Select an Aero theme

  4 see if previews back

  Just for the record, could you let us know if any of the suggested fixes works (and which). If you still have problems after trying the above, could you please come back with more details (if possible).

  > This answer help?  If so, would you please click the green button to Vote as helpful to help future visitors encounter the same problem.

  All the best,

  Sharon

  Sharon Roffey
  Queensland, Australia

• option button Aero peek is inexcessable in menu taskbar properties and departure

  This option box is already checked, but it is inexcessable to change.  It is a light shade of gray and cannot be changed.  I tried to enable desktop overview

  with aero peek, as recently, my task bar disappeared after the installation of google chrome. She has been activated and does not.  After you have uninstalled chrome, I learned to use F11; which allowed the taskbar online, but with it among other limitations.

  ANY medium that inf will be appreciated.

  Click the Start button or windows key.

  The rating of ie9, preferably one that says not 64 bit, right click, click on all programs

  Select properties,

  Article make sure Normal execution window appears.

  You can also right click on the shortcut on the desktop you use.

  

• HP Pavilion 15n - upgrade issues lower windows 7 (FN, aero peek and sleep keys)

  Hello

  I recently bought a HP Pavilion 15 (n097), which is pre-installed with windows 8... naturally I went down to Windows 7 and installed as a good number of pilots required system I could get my hands - everything seems to have worked pretty well, the only problem now is that:

  (1) I have no option "sleep" in the start menu, it is grayed out (only to stop, restart and hibernate are available)

  (2) making the skimming between surprisingly heavy programs is not supported by aero peek

  (3) none of the function buttons work

  I would be VERY grateful if anyone knew where I might be able to install the necessary drivers so that I can fix these problems were.

  Thanks in advance.

  tassilov

  You are the very welcome.

  Sorry the quick launch of the software did not work.  Unfortunately, I won't be able to provide additional assistance to this issue because I don't know any other software that you can use for this purpose.

  Here is the link for the graphics drivers that you need.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23405&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  If you have not installed the Chipset Intel driver, I highly recommend you first install and reboot the computer before installing the graphics driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• Windows 7 - Aero Peek doesn't work

  Hello!

  Well, it looks like Aero peek working at all. It is activated in the task bar, and in the task 'Visual effects', everything is selected. I am also unable to flip flop.

  I use Windows vista edition Home premium that I just bought.
  Any advice?

  Hello Nico884,

  With all the steps that have been taken to solve the problem, it is rather likely, not a setting, but a corrupt user profile. You will not lose any software that you have installed by using a new user profile. You can easily transfer your data to the new profile so, take a look at the difficulty of a user profile is corrupted.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.