Similar Questions

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.

• Windows 7 update failed after freezing on farm and would not install through Windows Update or installation manual

  Hi, once windows 7 installed successfully 5 updates I tried to restart the computer, but it would not be closed after that some time I did a cold longer closed. After booting even once, Windows 7 does not recognize the updates, as it is installed and I tried to install them again through Windows Update, but also install the updates manually and they all fail to install.

  The error code given is 800F0900

  The updates are:

  • KB978601
  • KB979309
  • KB979683
  • KB981332
  • KB980232

  I use Windows 7 ProfessionalAny help would be much appreciated! Thanks in advance.

  Hi msbubu,

  Step 1: Run System File Checker (SFC) scan to repair corrupt system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: The clean boot computer and then try to install the update one at a time 

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to STEP7 followed normal startup in the link.

  Update security for Windows 7 (KB978601)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8d4a6c65-E171-4570-8F3F-118f06910baf

  Update security for Windows 7 (KB979309)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=f0dbac52-0f0e-40bc-9371-17fa594424d5

  Update security for Windows 7 (KB979683)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ff58d80c-33ce-4d9e-AAA5-0b1841458931

  Update security for Windows 7 (KB981332)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c3f76835-0053-4E53-A451-14255e7a4fc0

  Update security for Windows 7 (KB980232)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=389184c5-9001-497d-bdf4-81f97ecb617f

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After formatting hard drive and reload windows xp does not update some crashes

  Hello
  My friend has problems reloading windows xp after that she formatted his hard drive virus inprivate. It seems to install ok but then when you try to get the updates, it can do a little and then hang or just then find crash. then finally last night it wouldn't come back on just says installation is not complete. any ideas thanks everybody

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• users and internet accounts. -Account that a single user can connect to the Internet at the same time

  When I am connected to the computer, and I 'switch user' other user accounts, cannot connect to the internet, unless I have complelty "log off." How can I fix? I should be able to stay connected with the windows open, so I can continue when I get back.

  I should be able to stay connected with the windows open, so I can continue when I get back.

  It depends on your network, there'S no connection.  For example, it could certainly happen to a user who was logged only under that user.   However, in this case instead of completely disconnected the first account you could probably have the first account log out and hang up the connection.  Then the second account probably could dial and connect.  FWIW, I think a DSL PPPoE user might see similar symptoms.

  Robert Aldwinckle
  ---

• My CC app says that it is to install an update, not related to a product. It will not start and says it's installing an update. I can't sign in or use one of my apps or get my files

  Help

  Restart your computer and then try to open applications.

  I hope this helps.

  Concerning

  Megha Rawat

• HTTP session and app spring within the single instance of tcServer can connect to separate the GemFire instances?

  In a JVM tcServer, we use the session HTTP GemFire module and also have our own spring application using GemFire.

  Is it valid for the session module to connect to an instance of GemFire via cache.xml and have the Spring application context to connect to an instance of completely separate GemFire (different benchmarks & cache server)?

  To do this, you must ensure that the use of the application of your spring Gemfire is isolated from the session management. Essentially, all you need is to group the jar with your application of spring gemfire. Chargers classes separate webapp then takes care of separation Gemfire contexts.

  -Jens

• Screen sharing, FileVault, and reboot

  Hello. I have a Mac Mini that has active FileVault, and I control my laptop using screen sharing. The only problem I have is the very occasional time that the Mac Mini freezes or restarts. When this happens, there is no way to connect via screen sharing and I have to login on the machine itself (I don't keep the keyboard and monitor connected so it's a bit annoying). FileVault ask this question because it requires a pre-launch where screen sharing does not work. I could turn off FileVault, but would prefer not to if possible. Is it possible to get through pre-launch of FileVault remotely using my laptop?

  Is it possible to get through pre-launch of FileVault remotely using my laptop?

  N ° such a "pre screen sharing" is identical with the Option key button to get the Boot Manager. We can't screen hand when this happens.

  Your only options are to 'disable' FileVault or have always a practice keyboard/monitor/mouse to enter a password for FileVault to unlock the drive.

  I'm curious why you have FileVault enabled on a Mac Mini. Laptops I understand because they are mobile, but I'm not for desktop computers.

• 6s unlocked IPhone be locked after erase all content and settings

  6 s unlocked IPhone has been locked after erase all content and settings

  This statement should help you to disable find them my iPhone Activation Lock - Apple Support

• Messages.app and Facetime.app do not open after OSx updated 10.11.5 Mountain Lion

  Last night, I've updated my Macbook Pro in early 2011 at the El Capitan 10.11.5 Cougar (Yes, the leap). Open all apps to check out them, and Facetime.app and Messages.app are not open.

  FaceTime.app gives the message "an internal FaceTime error has occurred. There was a problem with Facetime. You must exit and reopen Facetime. "A few times. No change.

  Messages.app: Last night after update, I opened it and gives the message "Messages is updated... The database of Messages is in the process of modernization, please wait until it is finished or Messages Quit and restart it later. "Allowed to do that during the night (about 7 hours). App reopened this morning and nothing went up, no new window, no error message, no light 'walk' on the dock; but, if you click on it showed the "Application does not message." After a few re-openings, it's the message even 'Messages is updated"as above.

  I have not tried anything other than a restart.

  Any ideas on what to try? Thank you in advance!

  create a new administrative account, start to this account and see if open programs.

  otherwise, open the Console.app (from projector to type "console" without the quotation marks)

  clear the console log (clear view)

  Launch the application

  Paste the result to the console in this thread for analysis.

• After downloading an album and burn it to a CD, I click on "cover art" and receive nothing. Where is he? It is with a Windows PC.

  After downloading an album and burn it to a CD, I click on "cover art" and receive nothing. Where is he? It is with a Windows PC.

  Lenore,

  iTunes does not work to burn Add.  In fact, standard audio CD can not incorporate art;  It can be external, as printed on the drive or on an insert.  What exactly are you trying to do?

• How can I reactivate my iPhone after declaring, he lost and deleted from my ipad

  How can I reactivate my iPhone after declaring, he lost and deleted from my ipad?

  See "how to disable or cancel lost mode?  here:

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

  If erase you your device, which is different from the lost mode, and you must read and understand the information on having cleared your device in the same article.

• I did this after intro animation effects and it was made entirely from photoshop files and my comp settings in AE is HDV 1920 x 1080 25, then I was asked to the release of the film in 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  I did this after intro animation effects and it was made entirely from photoshop files and my comp in AE settings is HDV 1920 x 1080 square pixels 25,.

  Then they asked me out of the movie at 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  1. to adjust for NTSC composition without affecting the report l / h.

  2 - this film must be rendered in RGB + ALPHA, and yet the mpeg does not support this definition, it seems that the record will be in the video codec animation or other.

  I am bit confused if I need to adjust the model, or leave it and set the video codec only.

  Thank you

  If you have (or get) MPEG Streamclip, which is free, you can open the anamorphic clip and resize it to 1080 true. You will be able to choose H.264 as a codec. It will be if necessary deinterlacing. Suppose that the MPEG card is a MP4 container.

  Good luck.

  Russ

• Slow Mac Pro after that reset complete and SSD upgrade

  Hi all

  A few weeks ago, my Mac (mid-2012) began to slow down, finally I tok inside the store for some advice. The guy told me to run check disk, repair disk etc, I did, but it did not help. I then decided to collect the files that I wanted to keep and reset my mac, still no better. Then I tried to upgrade to El Capitan, which made things worse. After hours of fiddling and waiting I finally ended up back with somehow Mountain Lion.

  I went back to the store where he then said that my hard drive has failed and we must replace, so I've upgraded to a GB Samsung SSD 850 250 evo. This is a slight improvement that I managed to get to El Capitan on it now. However, the startup time is about 7-8 minutes and any task takes a ridiculous time amount, I get the Rainbow wheel very often - even though at this point, I have no software installed except that downloaded as a basis (other than Spotify) nor do I have all the files on my hard drive either - once again, other than those that come by default. I would say that the performance has not improved the outcome of this change of hard disk.

  I'm pretty stuck now, my CPU usage seems to go up in the pics, but there is no indication as to what is causing these spikes. I disabled the spotlight, but that did not help either.

  Help please?

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• After replacing the PSU and GPU in my HP Pavilion desktop computer, the wifi stopped working.

  I'm upgrading my pc, I plug a new PSU and video card.

  After successfully, I replaced and installed, I booted up my PC, but it showed that none of the networks or wifi connections are available.

  I read that maybe it's something to do with the antenni?, I noticed something that looked like antenni tangeled upward in the power supply cables, I did not use them. but I have no idea what could be the problem.

  Thank you for the information, @henry321.

  Yes, I suggest to leave the side panel on the computer and then move the led in the case and look at the signal.  You may need to route through an opening in the case is outside of the case.  I think I read that it is the best way to get a good signal.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.