After 8.1 Upgrade Windows, Lenovo Yoga 13 blocks when I close the lid and reopen
After I opened the lid and the Tablet starts to come out of standby mode, the blue screen appears with the following error message:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLES (rtwlanu.sys)
Any ideas what is the cause and how to fix?
Tags: Lenovo Notebooks
Similar Questions
-
Windows 8 do not sleep when I close the lid
I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.
What can I do else?
Edit:
I tried changing the settings to hibernate instead, and what he gave me was a BSOD. Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?
is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now
-
I have a Toshiba laptop Windows Vista Home. Recently, every time I close my laptop lid, and try to turn it on a few minutes later, the wireless devices were disabled. When I try to reactivate it from ConfigFree on wireless network connection to activate, it said everything was active except for wireless devices. The only way I can turn it back on is by restarting my computer. It only started happening recently and for first of all, I would stay on. No idea what's wrong?
Hello
Maybe this can help.
Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).
Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).
There may be some variations on where is the energy saving setting.
Here are a few examples, YMMV, look around your systems.
Example, http://www.ezlan.net/example/powersave.jpg
Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg
Example, http://www.ezlan.net/Win7/power_save_win7.jpg
Example, http://www.ezlan.net/Win7/adv_power-sav.jpg
----------------------------
Still a problem?
Check support for the router and make sure that your using the latest firmware for the router.
Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.
If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
-
Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.
Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.
A few other basic problems you can try things is the following:
Run all Windows updates, install all required service packs, etc.Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.
Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
-
When a close the lid of my computer laptop wmp stops and when I open it, it resumes. This only happens on the battery. I have it set to not sleep, and there is no screen saver. I want to use my cell phone as an mp3 player without having to leave the lid open. is there anyway to prevent a break?
original title: WMP stops when the lid is closed
Open Power Options - you can do it from the control panel by typing Power Options in the start menu, or by right click on the battery icon in your system tray (right end of the taskbar.)
Click on "change plan settings" for your current power management. On the next page, click "Change advanced power settings". On the box that opens, expand 'Power buttons and lid', then 'action close cover.' Change the selection to "on battery" to the 'status quo', and then click OK. Close the power Plan window.HTH,
ChrisMS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
When I upgraded my MacBook Pro to El Capitan, the F4 key that allows to display the date, time and calendar has stopped working. Anyone know if this is not supposed to want to work more? Or how I can quickly display the date and time as I'm used to using the F4 function key?
On my Mac running 10.11.2 which brings to the top of the dashboard. I think that there are now three different ways to make in the face of dashboard elements, which seem completely obscure to me. I just set mine to do what he did originally come in an overlay with the widgets running.
Look in System Preferences > Mission Control...
to halfway to the bottom of the box:
Dashboard: {as overlay, like space, Off}
-
Windows Mail has stopped working when I close the program
After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working. How can I prevent the box "Windows has stopped working' appearing and restart the program?
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I suggest you to try the steps in the following Microsoft article and check if this may help.
Solve problems with Windows Mail:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
Hope the information is useful.
-
Windows 7 Sp3. using Firefox 7.01
Non admin users.
Home page change to what they want and it can work.
BUT when they close firefox and open it again the home page goes back to the default settingYou have a (security) installed software that can restore files when starting?
See:
-
Its Lenovo Yoga 2 1050F when he slide the lock screen
Whenever I have unlock the lock screen there is a sound, like a rattle. It doesn't seem like the noise of reports, and I don't see any setting for it. I'd like to eliminate and stop the sound if possible, but I have checked all the settings I can think (Sound & Notification, security) but could not find this particular sound. It's not a big deal, but I wish I could turn off if possible. Thank you. This forum has been very useful.
Sounds and notifications in settings, select other sounds.
-
Satellite A200-27U not wakes up after hibernation when you open the lid
I just bought a new Satellite A200 27U which goes a lot so far.
However, I have configured in hibernation mode when I close the lid.I can't resume automatically hibernate when I open the lid.
I have to press the power button.
Is this normal, should resume automatically?If yes how to do it do?
It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
But it is not so problematic. What do you think?You use Windows XP Home or Vista edition?
-
When I close the lid of my laptop, I have it set to sleep and put into hibernation, but whenever I'm took over in the last logged-on user account. I use Windows 7 and I would like to know how to configure settings to direct me to the user login screen when I open it again the lid of my laptop after the '.
I read elsewhere that the power settings changing standby and Hibernate should do the trick, but so far they have failed.
Any suggestions?Thank you
Most laptops will give you the option to do nothing, sleep, Hibernate or stopping when you close the lid. End the session is not normally available. However, you can select the option that requires the user to enter a password when the machine is awake.
-
Upgrade in an incorrect language window
I am trying to upgrade Windows Vista Home Premium. When I click on the UPGRADE button then it will display a window in Turkish. I need the window in English. Can you please help?
Thank you!!
Hello
- You bought a Turkish version of upgrade CD?
- How you are trying to upgrade? (To CD using, every time that the update)
- What version you are trying to upgrade? Is - this Windows 7?
Make sure you have the operating system to install a correct language.
You can visit these links and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/products/anytime-upgrade
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files
Response so that we can better help you.
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
Since I upgraded to firefox 2 days ago, there a reboot problem. When I close the firefox window, it closes as it normally does, but whenever I try to restart firefox it shows the notification that firefox still works and I first need to stop the previous process before you can start a new one. Finally after I manually stop the firefox process it restarts again.
What fixed it for me, but I am running v.15 because of other problems. I have to say I tried a hundred things and nothing works. I made the note never stop, even hours later, if I forgot to go to the Task Manager to end the process. It seems not important to know if I had extensions or modules running or not. I tried this before today. My graphics driver updated a couple of months. In any case, THANK YOU for this, finally something is going right.
-
After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available
It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80
Maybe you are looking for
-
Hi I have a pavillion g6 2244 and 8 g of ram with radeon hd graphics card E2-1800 amd 1.70 Ghz 64-bit and I down classified Windows 8.1 for windows 7 due to extreemly high now computer CPU usage is very great, but im Miss sm bus controller and bus US
-
Pavilion 15-p168ca: slow need to RAM?
I am under Lightroom 5 but its so slow, I think I need more Ram. Can I add to the product J9M62UAA ABL
-
When I turn on my comp. after that a few minutes of the Tower starts to groan and moan until it stops completely. I have free disk space. went to a restore point everything I can think of. I have a HP COMP and maybe 3 years. I'm really at the point
-
Need help in activating the copy of Windows XP
Original title: legal Options I have found several years after having my computer up to date, that my software for Office 2003 and Windows XP are not legal. My Windows Media Player does not work either. I have the disk for Windows 98, which would h
-
Files duplicated on MS Word 2010 document
How, for does not orginate duplicated file / with signs ~ $/ after creation/editing of Word 2010 files? Is - this temporary file?