After a crash, I can't send mail using windows mail. It's not the server, but a p [problem with windows mail. ICAN receive, but not send

I can receive mail using Windows Mail, but cannot send. I checked with the server, and they have determined that it is Aproblematique with Microsoft Windows Mail. This has happened after that my computer crashed and I was able to recover everything that has been saved, but apparently something wrong with Windows mail

I can receive mail using Windows Mail, but cannot send. I checked with the server, and they have determined that it is Aproblematique with Microsoft Windows Mail. This has happened after that my computer crashed and I was able to recover everything that has been saved, but apparently something wrong with Windows mail

When you try to use a Windows Live e-mail account or a different Web-based e-mail account in Windows Mail, you cannot send e-mail messages?

Windows Mail supports more HTTP servers that are used by Hotmail and other e-mail providers such as AOL mail, Google mail, Yahoo! mail Web.

To resolve your problem, use Windows Live Mail instead of Windows Mail.

Windows Live Mail works with popular Web-based e-mail services such as Hotmail, AOL mail, Google mail, and Yahoo! mail. Windows Live Mail is designed to configure automatically many popular e-mail services.

Windows Mail also supports the types of Server Simple Mail Transfer Protocol (SMTP), Post Office Protocol 3 (POP3) and Internet Message Access Protocol (IMAP).

Download of an update "Windows Live Mail" should solve your problem.

Tags: Windows

Similar Questions

  • After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

    After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

    You can not

  • When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

    When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

    After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

    gay

  • How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

    How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

    Hello

    an answer your other thread

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/why-do-i-keep-getting-your-Windows-Live-ID-cant-be/268ff99c-E459-E011-8dfc-68b599b31bf5?page=1&TM=1301396733390#footer

  • After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

    After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

    Seems to be counterfeit software.  Checked the site and has the wrong serial number.  Looking to show several spelling mistakes in the 'fine print' on the box.

  • The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

    The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

    Yes, copied files from Nikon NEF, DNG.

  • Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"

    I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?

    dw-conn-error-page1.jpg

    dw-conn-error-page2.jpg

    In the view of the file context menu, click Remote Server

  • Older versions of Windows: can we continue to use windows 7, 8.1 etc after Windows 10 is the standard?

    We can older versions of Windows, continue to use windows 7,8.1 ect. After the windows 10 is the standard?

    Of course :)

    Win - 7 is supported up to 2020

    I forget victory-8 because he bites, but it is supported any longer.

    Do not fear mongering all security updates generally applies to all versions of windows even to win-10: p

  • How can I create a filter to remove only "junk" from the server?

    One of my email accounts is an important customer. I manage their online customer service. Normally our protocol must always leave all messages on the server, so that one Thunderbird account, I never put delete messages on the server.

    But the account has recently started a lot of unwanted messages. Thunderbird is doing a remarkable job to those tagging and placing them in the folder junk e-mail for this account. I would like to create a filter that could remove them from the server, preferably more than "x" days old so I could monitor activity to ensure that no important messages are removed.

    I noticed that in "Filters" I can create a custom header of my choice filter, but am unable to create what I want which is:
    -After the mail is marked as junk by Thunderbird to delete messages from the server, if they are older than "X" days (my choice of 'X').
    -not to delete all messages in the server for this account

    Try:

    • Right-click the junk e-mail folder and select "Properties".
    • Click on ' retention policy tab
    • He chooses to "use my account settings."
    • Uncheck this option for other options.
    • Select: for example: delete messages more than x days.
    • Click OK to save the changes.
    • Close and then restart Thunderbird
  • How can I prevent users from Apple ID to connect to the server?

    We are a small company that uses a Mac Mini Server. We just clean installed 10.11.4 on new SSD, I installed.

    After you have configured the actions, anyone can connect even when they do not have a username or password and that's because they use the same account as the server iCloud (we do this to keep all calendars, reminders, mail, etc. in sync), but it is automatically all have their connect you to the same user for file shares. I didn't have this problem before. And I certainly don't want anyone logged in as the same user. The guest user is disabled.

    I searched and searched for the answer and found on previous operating system but not El Capitan.

    So, how to disable the connection with Apple ID?

    I found the solution, and I want to share it.

    If you server is under

    Users accounts:

    Then you right-click the user and select advanced options. If you have anything in the alias, which would cause if logging the user with an identifier to Apple. That might be true for all users, not just the one connected locally.

    If you do not have server and you share settings:

    System preferences, then users and groups. Then, you need to unlock downstairs. Then you right-click the user and choose advanced and you options if you have anything in the alias, they could connect without a username and password if they are connected to the appleID already.

    I hope this helps you.

  • When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

    Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

    See this support article - difficulty of problems connecting to websites after Firefox update

  • How can I back up/downgrade Firefox 5 for Firefox 4? I had nothing else problems with Firefox 5.

    I had any other problems with it. At least once a day, it crashes. It crashes even on mozilla.com with no other open tabs. Sites are slow. Much slower than they should be. Google takes a good minute to 2 minutes to load. It's a roll of the dice for me if I have any bookmarks when I load firefox.

    I did not have all these problems with Firefox 4.

    There could be a problem in your Firefox profile. For example, one of your modules may cause the problem. If you're ready to try some troubleshooting, you could test in Firefox Safe Mode, which temporarily disables your add-ons.

    I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

    On the Help menu, choose "restart with disabled modules. If you can't go to the Help menu until Firefox freezes or breaks down, hold down the SHIFT key when you restart Firefox. More information: Safe Mode.

    Firefox works normally with disabled modules?

    ---

    In response to your question, because security vulnerabilities, roll back to Firefox 4.0.1 is discouraged. 3.6.18 Firefox would be the safer choice.

    Here is the process to roll back:

    First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

    Then, download and save Firefox 3.6 on your desktop for later installation. http://www.Mozilla.com/Firefox/all-older

    Firefox is closed 5.

    You could install Firefox 3.6 on it (many have reported success) or you can uninstall Firefox first. If you uninstall, do not remove your personal data and settings, the entire program.

    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left. If there are serious questions, please post back with details.

  • How long can I continue to use Windows 7

    I don't find this answer online, not even on Microsoft.

    If I choose to keep windows 7 and not upgrade to Windows 10 before the end of July, how long Microsoft will continue to provide updates on it?

    Also, if I need to re - install Windows 7 after an accident or the replacement motherboard, can I do it and activate it and still get all the old updates for it?

    And how long can I still get questions answered here relating to Windows 7?

    I use Windows 7 Ultimate N on a computer desktop and Windows 7 64 bit on my laptop, which came from Toshiba.

    Extended support (and updates) for Win7 continues until January 14, 2020.

    If you need to reinstall Win7 for a reason, you should be able to activate using the original product key. We hope that the Win7 updates be available (i.e., through the Microsoft Update Catalog) several years after the end of Extended Support, but no one never really knows for sure.

    Similarly, Win7 specific forums is still available here well after January 2020.

  • Can access the shared folder by using the name of the server, but is unable to use the intellectual property

    Hi, I need help with a very strange problem.

    I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.

    So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.

    My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.

    I can using Ping IP or name of the computer for every user of AD.

    Please check the attached images.

    When I try to access it using IP, it gives me the following error:

    \\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.

    Currently, there are no available connection server to process the logon request.

    Hello

    You may need to ask the question on the TechNet Forums:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    Kind regards

  • How can HP LaserJet 3390 using Windows 7 - I scan several documents in individual files?

    Printer works fine, scanner works fine, using Windows Fax and Scan according to the HP website and all is well when I want to scan documents one at a time.

    However, when I put a stack of documents into the feeder and scan it turns into a single file of 10 pages instead of page files 10 1 as I need to.  It seems that there is an option in Windows Fax and Scan to do what I need (images to preview or scan as separate files under scan settings), but it is greyed out and I can't for the life of understand me how this box.

    Any help would be greatly appreciated.  Thanks in advance!

    The easy way to do this would be to scan to a single image as a GIF, JPG or PNG format.  These image formats are not able to form muliple page documents such as TIFF and PDF.

    If you want to create documents PDF or TIFF-single page then you will need to review advanced on this printer model analysis options.  Sometimes the printer will allow you to scan each page as an individual document by checking a box or by selecting a different profile from scan.

    If not, you can still scan pages from a single document, and then re - print the document in the form of individual pages of an image editing application.  Let us know which app you use to view your documents as well as the image format you want to publish in so we can give you specific steps.

Maybe you are looking for

  • Chat timestamp is originally 10 hours.

    Hello. I just got a new laptop and installed windows on this 10. After you have installed Skype, I noticed that the timestamp is set to US time 10 hours behind me. I'm on GMT + 2. No matter what I do I can't change it. I changed my profile to use the

  • Convert static Dispatch VI VI dynamic distribution

    I'm having a slow day, so I hope that someone else is working this Christmas and can answer this for me: I want to convert some of my class of LabVIEW static Dispatch screws of dynamic distribution. I thought it would be as simple as changing the typ

  • HP 6730 s broken screen

    Hello recently, my hp 6730 s was severely damaged - shot broke the screen. Eager to get a new layout, but I have now the display model and I have not been able to find online. Can anyone help on this? Thank you!

  • Windows 7 not updating some update

    Code 643 It keeps failing due to an unknown error KB2901983 23/08/15 I got this laptop for my sister and I have restored all Explain it like I'm five. Thank you

  • Problem after formatting flash wlc 2504

    Hi people! I have had problems with the update of the WLC 7,0 to 7,2 image and made a BIG mistake... I had formatted the flash. So now, I have not installed on my WLC RTOS. The only thing I have is the bootloader 1.0.16. Of course, I can not install