After a reset of vista, it was impossible to install SP1 SP2 so

as stated above - sorry, 1st time here

After a reset of vista, it was impossible to install SP1 SP2 so. Finally, it was done via remote control by m/s. If I restore to new testament, I have the same problem? (looks and deliver it with the "build" number)

I don't know because I don't know what was the problem in the installation of SP1 and SP2.  It is possible that the same issue may occur again.  I don't know any specific build of Vista which has particular problems associated with MS, but I'm not a expert on the Windows updates - if Microsoft Support tells you that it is possible that this is the case.  It may very well work the next time, or you may encounter the same problems again - who knows.  In any case, it is really not that you can do about it, unless you want to buy another copy of Vista with a different "build number" so that you can improve the chances that the upgrades will work without any problem (but do you really want to spend the money on that when all it takes) (, it's a lttle help to get install them again the situation would occur again?).

I hope this helps.  If you have any other questions regarding updates Windows, including Service Packs, please post in the Windows Update Forum at: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the updates, including service packs experts will be more than happy to help you with your questions or problems.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Vista updates not defective to install SP1 & SP2

    original title: Vista will be not updated

    I help my neighbor with his laptop Dell 1520 running Vista. She had some problems with IE-7 and I noticed that the laptop has not had a successful Windows at a time update long (do not have SP1 or SP2). I tried several attempts to get the updates to work and finally reloaded the operating system software Windows Vista to factory state - first of the recovery on the HARD drive partition, then a second time since the recovery disks provided by Dell. In both cases, the subsequent updates refused to stick. The first batch of 107 updates downloaded and installed, but then to restart something goes wrong and the system goes into Startup Repair which ends with a system restore. The end result is that many updates end in failure. Never can get past this, even by trying all the updated Microsoft suggested tips (mode boot, security turned off, audit, FixIt, clear temporary files, etc. of disk errors). When I run Windows updates again, I selected 107 updates to be installed again.

    I suspect that I have a HDD laminated, but thought that I would like to ask for help. Any suggestions on next steps?

    Mike T in Virginia

    Hey forum: Got it for update.  Pilots were not common.  Updated drivers and updates started flowing!  Thx for the help,

    Mike T IS

  • I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

    I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

    1. Learn how to install Windows Vista Service Pack 1 (SP1)
      http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
    2. Learn how to install Windows Vista Service Pack 2 (SP2)
      http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    Manually install the SP1 and SP2 then.

    The links above will advise you where to get the standalone etc versions.

  • No sound on Vista after installing SP1/SP2 with Realtek

    Hello.

    I encountered a strange problem on the computer of my parents-in-law office. After an installation of SP1 (and later SP2) no sound stereo speakers that is connected to the computer to an outlet.

    The computer is an Acer Aspire T180 with a built-in audio device Realtek HD (5.1, but the connected speakers are two standard PC speakers), and the operating system is Vista. Before installing SP1, the sound was working properly, and absolutely no software or hardware changes have been completed.

    My troubleshooting so far include:

    -Tested with a helmet and another pair of speakers that I know works

    -I have obviously checked that nothing is cut in all available parameters, or speakers

    -Tried each input/output on the back of the computer, as well as on the front

    -Checked in "output devices" that the speakers are connected and checked by default device

    -Tried the two codecs/drivers available here: http://support.acer-euro.com/drivers/desktop/aspire_t180.html

    -Tried the drivers of avaiable supplied directly from Realtek: http://www.realtek.com.tw/downloads/

    -Uninstalled Realtek everything (both in the Device Manager and programs) and let Vista automatically install the original drivers

    -Disabled the 'digital output device (s/PDIF)"which is in the list of devices in output/game

    -Unchecked the 'detect connection on the front"in Realtek audio manager program

    -In addition, SP2 has been installed, which did not help. In addition, I tried every setting available, uninstalled/installed and so on. During music playback (or test tones Realtek or Windows sounds) all is apparently looking for OK with indicators of volume, jumping up and down, but everything is quiet.

    So I'm out of ideas and cannot understand this. I am very grateful for any help and advice. Thank you!

    Hello

    Make a Restore Point to be sure it works manually. The below indicates how to use VSSadmin to put in place
    and control if necessary.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    How to turn System Restore on or off in Vista
    http://www.Vistax64.com/tutorials/66971-system-restore.html

    Adjustment of the amount of disk space, System Restore uses for restore points
    http://bertk.MVPs.org/html/diskspacev.html
    How to change how much Space System Restore can use
    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
    http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

    ShadowStorage vssadmin commands
    http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
    http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

    Guide to Windows Vista system restore
    http://www.bleepingcomputer.com/tutorials/tutorial143.html

    Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
    backup and at the time when there are high levels of input/output
    http://support.Microsoft.com/?ID=826936

    A good utility:

    Explorer of the shadow - free
    http://www.ShadowExplorer.com/

    ================================

    After doing your restore point.

    Go to Device Manager - click anywhere in the blank area - then click on VIEW - show hidden devices

    Look around your Sound Device - If found click right on - UNINSTALL and when the box appears
    -REMOVE the pilot - REBOOT - reinstall your latest driver - do not forget to check the version of the Device Manager
    that they could rollback and you will need to install the driver - reboot - check until the correct version shows
    upward.

    Also the sound driver in previous posts.

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    No sound in Windows - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Vista - Error Code: 80070002 (cannot install SP1)

    Hello

    I was wondering if someone could help me please?

    I tried to update my Vista Edition Windows Home Premium,

    Processor: AMD Turion (TM) 64 x 2 Mobile Technology TL-50 1.60 GHz

    Memory (RAM): 958 MB

    System type: 32-bit operating system

    and keep facing the same problem over and over again! I followed all the instructions, help and support, and blogs on the internet and nothing!

    Can someone please please help me? I'm desperate!

    Kind regards

    Ed

    - How to obtain the latest Windows Vista service pack

    Please read this first -
    Method 3: Get the latest Windows Vista service pack from Microsoft Download Center

    Download link for Windows Vista Service Pack 1 five language standalone (KB936330) 32-bit

    Once the download is complete, create a folder on the root drive (the drive where Windows is installed on, usually C:\) and name SP1.
    Now move the downloaded, saved, on this file standalone installation package.

    Configure the system to boot
    Now, install SP1 by the right by clicking on the file. Windows6 0-KB936330 - X 86 - wave0.exe (Vista SP1 - 32-bit) and choosing "run as administrator".
    Accept the UAC prompt.
    After the required reboot and installation of SP, Cancel the Clean boot steps and restart in normal Windows mode.

    If you still need assistance in obtaining of Vista SP1 installed - free support for Windows Vista service pack problems

    MowGreen
    Expert in Windows IT Pro - consumer safety

  • Vista - Error Code: 80070005 (cannot install SP1 KB936330)

    I get an error code 80070005 whenever I try to install Windows Vista Pack 1 (KB936330) why that I get this message and how do I solve the problem?

    I get an error code 80070005 whenever I try to install Windows Vista Pack 1 (KB936330) why that I get this message and how do I solve the problem?

    80070005 means "access denied", you do not have the right to not want you wanted.

    So were you connected to your administrator account when you try to install SP1? You must.

    Here is an answer from another forum of Microsoft:
    Response of NeilBooth has been marked as answer.
    Fold another suggested dsiabling the anti-virus program

    Title: Vista SP1 installation fails with error code 0x80070005
    http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/cf2c57e8-AED5-4C71-b58d-499cc901d796 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • After the reset of all plug-ins has recently installed the plugin no longer works and will not reinstall. It will not be displayed in the modules arrived saying that he installed

    I recently had to reset my plugins by using 12 Firefox in safe mode to get rid an extension/add-on causes a redirection problem. All was well, except for a plugin I need is no longer works. It is called 'missing-e' and is for Tumblr.

    I tried put it back at least 5 times, according to their instructions and am now here, after they said it was a browser issue. I do I get invited to install on firefox, I install, I get the message that it has been installed correctly - but then it never appears in the Extensions or Plugins area under modules area (even if nothing never appears in the Extensions). And the features, it allows tumblr are not enabled.

    The 'missing-e' people sent me here say they believe that it is a browser problem.

    -> Create a new profile to check if your profile is causing problems, as described in this article-> Basic - a new profile troubleshooting

    • Now, launch Firefox with the new profile.

    -> IF this new profile works, then you can retrieve your history, passwords, bookmarks, etc. from the old profile, as described in this article-> recovery of data from an old profile

    Check and tell if its working.

  • After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

    I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

    I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

    I am at a loss.

    This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

    You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

  • After the upgrade from vista to win 7 can install vista on another system?

    I have an older system which will be an upgrade of vista, can I use my vista software and the key for the upgrade of the old system because I upgraded vista to win 7?

    If you have used the license system / operating of Vista as part of the Windows 7 upgrade process: No.

    You cannot use your Vista license anywhere else if it is part of the Windows 7 upgrade process.

    See you soon...

    .

    Mick Murphy - Microsoft partner

  • Status bar indicates that I have an update. During the treatment he said that it was impossible to install the update

    The icon appears: you have installed updates.  I support on installing the update.  He tries and the answer that comes back: cannot install the update.  The next day, he says I have an update again.

    Hi JIMPAVIS,
     
    -Do you remember the number of the Knowledge Base (KB) of the update that you receive as an alert to install?
     
    See the installation history for the error code or error for the failed update.
     
    To view the history of installation, follow these steps:

    a. click Start, point to all programsand then click Windows Update or Microsoft Update.

    b. on the Web site, click view update history.

    c. find the latest entry for the specific update.

    d. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed. It shows the status as being down.

    e. click on the red X icon to get the error code or the error message for the update has failed.

    For more information, see:

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    Keep me updated on the status of the issue.

    In the meantime, try the steps in this link and check if this may help you:

    Cannot install Windows updates

  • Impossible to install sp1

    Hi all the iv been trying to install win7 installed iv Windows6 sp1. 1-KB947821-v8 - x 64 and watched in CheckSUR and got this (quote)
    =================================
    Preparation of control system was updated.
    Binary version 6.1.7600.20822
    Package, Version 10.0
    2011-01-20 16:14

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages

    Control components store
    (f) CSI shows missing 0 x 00000002 amd64_atiilhag.inf - languagepack_31bf3856ad364e35_6.1.7600.16385_en - us_a1c3301f2f8c823c.manifest amd64_atiilhag.inf - languagepack_31bf3856ad364e35_6.1.7600.16385_en - us_a1c3301f2f8c823c
    (fix)    CSI CSI of Missing clear replaced file file: amd64_atiilhag.inf - languagepack_31bf3856ad364e35_6.1.7600.16385_en - us_a1c3301f2f8c823c.manifest to: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-enus-amd64.cab
    (f) CSI shows missing 0 x 00000002 amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb.manifest amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb
    (fix)    CSI CSI of Missing clear replaced file file: amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb.manifest to: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-enus-amd64.cab
    (f) CSI Payload file missing 0 x 00000000 atiilhag.inf_loc amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb
    (f) CSI Store Directory missing 0 x 00000002 winsxs\amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en-us_a84b3670179ab5eb\ amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb
    (fix)    Store of CSI lack created CSI C:\Windows\winsxs\amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en-us_a84b3670179ab5eb\ store Directory directory
    (f) CSI Payload file missing 0 x 00000000 atikmdag.sys.mui amd64_atiilhag.inf.resources_31bf3856ad364e35_6.1.7600.16385_en - us_a84b3670179ab5eb
    (f) CSI shows missing 0 x 00000002 amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63.manifest amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (fix)    CSI CSI of Missing clear replaced file file: amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63.manifest in: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-enus-amd64.cab
    (f) CSI Payload file missing 0 x 00000000 ativvpxx.vp amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Store Directory missing 0 x 00000002 winsxs\amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63\ amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (fix)    Store of CSI lack created CSI C:\Windows\winsxs\amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63\ store Directory directory
    (f) CSI Payload file missing 0 x 00000000 ativpkxx.vp amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 ativokxx.vp amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atidxx64.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atidxx32.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 ativcaxx.vp amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 ativdkxx.vp amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atikmdag.sys amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiilhag.inf amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumdva.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumdva.cap amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumdag.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumd64.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumd6a.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 atiumd6a.cap amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 ativcaxx.cpa amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 amdpcom64.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI Payload file missing 0 x 00000000 amdpcom32.dll amd64_atiilhag.inf_31bf3856ad364e35_6.1.7600.16385_none_019357585ef99a63
    (f) CSI shows missing 0 x 00000002 amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0.manifest amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0
    (fix)    CSI CSI of Missing clear replaced file file: amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0.manifest in: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-enus-amd64.cab
    (f) CSI Payload file missing 0x00000000 CTRL.s3 amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0
    (f) CSI Store Directory missing 0 x 00000002 winsxs\amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0\ amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0
    (fix)    Store of CSI lack created CSI C:\Windows\winsxs\amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0\ store Directory directory
    (f) CSI Payload file missing 0 x 00000000 atiriol6.inf amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0
    (f) CSI Payload file missing 0 x 00000000 atinavrr.sys amd64_atiriol6.inf_31bf3856ad364e35_6.1.7600.16385_none_a909ad21d26d5bd0

    Summary:
    Seconds executed: 93
    Found 30 errors
    Fixed 7 errors
    CSI shows lack Total count: 4
    Fixed: Missing manifest CSI.  Total: 4
    County of CSI Payload file missing Total: 23
    CSI store directory lack Total count: 3
    Correction: CSI Store Directory missing.  Total: 3

    (/ quote)

    Please help ty

    In this forum, you will find support for Win7 SP1 Release Candidate (Beta): http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update SP1 installed more than 10 times however, it continues to appear in "WINDOWS UPDATE" and impossible to install the SP2 or upgrade to Internet Explorer 9...

    I tried continually to upgrade Internet Explorer 8 for Internet Explorer 9 without success. When I do so it stops the installation and sent me to the site of installation of SP1. My system is Vista Home Premium, 32-bit, so I try to install this download required and received a message (I'm under frustrated memory) "not for your system" - something like that... The SP1 update is not successfully installed, I cannot update IE8 and do not have the slightest idea what to do...

    Why has not been installed SP2 years?

  • Error code: 800736B 3 (impossible to install SP1)

    cannot install service Pack 1 with windows update fails will be 800736b 3 error

    Give it a try and see if it solves the problem...

    Download and run the system update tool

    http://support.Microsoft.com/kb/947821>

    `~`

    03/14 / 1106:15: 22:00

  • Window vista business 32 bit auto update not install SP1

    I have Window vista business 32 bit on Sony Vaio laptop. My automatic update of the window is on, a lot of updates were installed, I can't find the SP1.  I checked the updates, saw "the view update history" but can't find SP1.  Basic information system shows no service pack. 'Winver' shows Version 6.0 (6000 building). All other window updates have been installed except "Microsoft SQL Server 2005 Express edition service pack 3 (KB955706) who is still unable to install, do not know for what reason." I guess that there is no link between the failed SQL and SP1. It is after a complete reinstall of Vista 3-4 days back.

    Prior to the relocation is in that the original version, Vista SP1 was installed automatically by the Update window.
    I wonder if SP1 is already installed, but is not displayed or should I download and install it manually.

    goyalvimal

    Thank you. I was able to install SP1 and SP2 after the changes and the process you described.
    Thank you very much. goyalvimal

  • Vista do not install SP1 by using Windows Update (do it manually)

    Hello

    Revised.

    If you have a Vista without SP1 and 2, DO NOT listen to Microsoft technicians and use auto update / windows update / microsoft update (until after you have installed SP1 & SP2).

    My recent experience and other posts, it won't work.  Manually download Vista SP1 and SP2 for Vista and install manually (SP1 first).  I lost hours with updates auto that I didn't need and made a mess.

    Vista SP1

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

    Vista SP2

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

    You must both SP1 first

    Read below if you want the details.  Thank you

    I just made a custom cleaning of a perfectly fine using a DVD of Vista Utilmate XP machine.

    After installation, he made the automatic updates ~ 106 and is now stuck on Vista SP1.

    Updates keep offering it, downloading, but I can not install.  About 5 or 6 times now.  It will take me to the user agreement, and after that I agree that it is said installation will take some time, but it never loads.  I had once an error message indicating I needed IE 8, but when I downloaded for XP/Vista, I got the error that IE 8 does not work on my system.

    I have just downloaded maually SP1 and SP2 machine, try to install, but MS it not recommended to some BS something and I would give them $189.  I was hoping someone might have an idea on how to get the auto update function to work to see if my manual Visat SP1 and SP2 (extract from the official MS site) may work 1.  MS supports was no other real help that they suggested to purchase Windows 7 at Wal-Mart, but I don't think that the old machine is worth 86 dollars.  They shouldn't tell you online they will be support for vista until 2017, then try to charge you once you've invested time in it.  They can even do it on purpose (not technicians, but the management).

    If you are reading this, thank you for your support.

    Response by number:

    1 KB2957689, KB2957503, KB2957509, KB2939576, KB2957189, and/or KB2926765 listed in installed updates (not update history)? [1]

    2. How about KB2893294, KB2892075, KB2901674, KB2887069 or KB971029?

    3. assuming that Java is installed, is 55 update Java Version 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

    4 Adobe Flash Player v14.0.0.125 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

    5 IE7, IE8 or IE9 is installed?

    6. is Firefox, Chrome or any other alternative browser installed?

    ==================================================
    [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

    [2] no need to install Java if it isn't already installed.

Maybe you are looking for

  • Password protect Pages in document does not work

    I set a password for an important page document (file > Set Password...) and so I tested it by stopping the program, and then reopen the document - now with a padlock on the front - but he did not request my password at all and could open immediately

  • No sound on Vista on satellite U300 - warranty issue?

    Hello I have big problems with the sound. I tried many solution, but nothing. So, here's the problem... I have no sound on Vista. 1. the (volume) icon showing, that "no audio output device is installed".2. I checked tolls-system information from the

  • What keyboard?

    Attached a photo of my newly acquired t420.I looked at all the options setting win10 and did not find.Please help and refer me to the correct driver.Thank youLaksi

  • Does anyone know if you can order as a T450s with Windows professional 10 easily instaled?

    I wondered about the laptop T450s-can buy you one that is installed with Windows 10 professional?

  • Test sequence

    Hello world I do a test configuration for my PCB. My project is to make a sequence of Test in Labview to test, measure and perform computations for devices on PCB. I want to do as 'HIT' start and the test sequence begins one by one. I can't afford Te