After a small power surge (I installed a surge protector) my printer and his new cartridge dating back to one week only prints blank pages when I click on 'print '.

Similar Questions

• Why, after the publication of my site, I see blank pages when you click on the button back on my browser?

  This is the Web site www.vuzetasrl.com
  Sometimes on my mac and even in my mobile.

  PS It is actually happening to the client and to everyone except me. I can go back even on my phone and I have a samsung. Tried on my iphone of bf and he doesn't either.

  Happened to someone?

  I can reproduce the problem, but only with safari on Mac, put it works in browsers.

  To isolate the problem, can you please post the site in British Colombia as a trial site.

  Thank you

  Sanjit

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• Only a blank page shows when you open Internet Explorer after the start.

  I'm starting to feel like an annoying uncle who comes to dinner too often, but I had another problem for you guys. Start goes normally, but when I click on the icon to start Internet Explorer, a blank page is displayed. At the top reads: "Documents and settings-all users.» "------Windows start menu-programs------startup------start" I ex it out, that is to say then returns.  When I left IE and it starts later, the page does not reappear. As I said, it seems that when I start the computer, and then open IE.  It is not in all programs - Start Menu.  I'm fresh out of virgins to sacrifice to the God of Microsoft, so what do I do?  I have a Dell Dimension 9150, with Windows XP, Service Pack 3.

  Daniel Shouse

  I uninstalled the drivers, but the download and installation of the new are a huge problem for me. I know that pilots are Radon X 800 series.  Devices are 554F for the video card and 556F for the secondary graphics card. I visited the ADM/ATI website and tried to use the upload feature and automatic installation, but it did not show any available driver. I have spent more than two hours trying to understand how to find and download drivers, but not luck. Can you help me? I have a Dell Dimension 9150, running Windows XP, 32-bit with Service Pack 3.

  Daniel Shouse

  The fact of this game:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?DriverID=R118970&FILEID=2731111469&ProductCode=dimension-9150&urlProductCode=false

• EPUB contains only a blank page after export

  I have created a book from several .indd documents. I also have a table of contents. I exported the file to cretae an EPUB. When it opens in Adobe Digital Edition, it shows the metadata, the editor and just the table of contents with no content. The EPUB says that it contains only a single page, and it is empty.  I think I have put all my info correctly in export and I am at a loss to why it produces no content.

  Thanks in advance.

  If you can successfully export ePub files and a book compiled from these files, there is nothing wrong with your copy of InDesign.

  It could be a subtle corruption in the problem or files. One of the standard methods of troubleshooting is to export files IDML (InDesign Markup) of one of your problem files, and then reopen the IDML in InDesign to recreate the file. Then the ePub export. If it works, you know that there is corruption which was fixed.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Problem intermittent boot Tecra S2 after pressing the power button

  Hi all
  I have a Tecra S2 with the 6600go GFX card.
  The machine is large but presents the following problem.

  After that the machine was interrupted for a while it will start not reliable.
  You press the power button. Either as soon as you release the power button or a second later (changes every time) the green power light comes on. The fan spins at high speed then slows down to a crawl a few seconds later (as usual) but LCD does not illuminate.
  Also when it does not start USB devices are not initialized (I have a product key dongle which will flash if it is not initialized - when you start the laptop properly this dongle on continuous - a normal start, it is initialized before the ramtest BIOS)

  I've updated the bios a couple of times - it is now 2.4 (I noticed the power button timings were changed in the V1.9) but this has not solved the problem.

  I tried to start on the current with battery removed, ca battery & battery only - the result is the same.

  I can start later button power until the laptop off, wait a few seconds and then try to get back to work.
  After several of these cycles, it will begin eventually to the top. Recently, it seems that it took several attempts before start-up.

  If I have used the laptop for an hour or two and then turn it off it will start almost always a first time.

  If I put the laptop to sleep (orange slow flashing power LED) then half the time that it will continue when you press the power button - the other half of the power LED will switch to the green but the LCD display remains inactive & I switch the power button.

  Any help or advice would be welcome.

  Thanks in advance,
  Robin

  Hello

  This seems very odd.
  First of all: you can boot from USB only if the floppy drive is attached.
  You can boot from these devices USB-drive floppy/disk HARD/ODD/LAN.

  In my opinion the other unit starts the sound not as issues not a software problem.
  I think there could be something wrong with the hardware. But it is not easy to say what it could be exactly.
  You know, the look on the material is necessary.
  I recommend you contact Toshiba service partner in your country.
  They have much more experience in such cases. Guys can run tests and then can give you correct information about the failure.

• surge in the House and now the pc does not start

  Despite beinbg plugged into a surge protector, it seems as if the power went out while I was away from home and this caused a wave (a conclusion). I guess it was a wave because now my HP 7250n media center pc will not start. Do not nothing fans. Just completely dead.

  What did I try? The light on the back of the computer remains turned on, so I followed the steps I have read on HP forum as an advisor help what to what power is out and the light stays on (as opposed to Flash, which it is not). I held the power button down while the system was disconnected. No power. I then tried to move the tension and then again, although the system was disconnected. It did not return the power. I opened the side panel and confirmed that the sons were running to the motherboard and have been connected correctly.

  Of course, I tried the machine on several different points of sale, and it is not a function of a defective surge protector or the decision-making.

  I have read one or two related forums which involved a debate between whether a PSU or of the motherboard problem. But I am pretty illiterate about these issues and don't know how to test or change a PSU. And the motherboard, I won't try to play with that. One of the messages, said if the light remained on was probably the case that the power supply was still OK, but this did not mean he would be able to power your computer (and did not say what to do if the light remains on, but rather continued to discuss what to do if the light flashes... that's not my situation). I guess I'm willing to try things if anyone has any suggestions, but I did the basic things that are offered at the beginning already. Are there next steps that someone can suggest?

  Thank you.

  Gordon, here is the information on the Belkin surge protector that I use:

  Model: BE112234-10
  Belkin 12-Outlet Surge coaxial Protection

  There are 3960 joules (prn. jewellery) of surge protection.  I don't understand the terminology entirely, but my son is an electrician and specialist in security system (low voltage) and he said it's a lot.  At least, for our part of the country.  It has also 12 points of sale with several outlets for small transformers that lift so much space.

  Replace a power supply is not so difficult.  The key is to watch where the wires are connected when you delete them.  You can take a photo before you start.  This will give you an idea of the area where they are going.  Most of the news of the PSU have the wires marked clearly as to where they connect.  The motherboard connectors are also marked clearly.  The hardest part is to get all the cables that are placed so that they don't block air to one of the components.  Need me normally up to an hour to do it correctly.  Sometimes, you need to get inventive with bigger cables.

  If you need assistance with the project, let us know.

  Message edited by old_geekster on 06/10/2009 16:46

• After a disk crash and a new motherboard, how can I turn off to allow a reinstall

  I have Photoshop Elements first migrated form a disc crushed second installation worked) and now from a PC AMD for a new motherboard and a new hard drive.

  I have only a single computer case and only I use the PC.

  When I try to charge my serial number Photoshop elements 14 inot he complains at the start it is already activated on the two PC.

  I can't go back to either facilities previously enabled to log.

  So, how rebook the two licenses that are glued on the former and today destroyed the material?

  Contact Adobe technical support and ask them to reset your activations.  She will probably wait until after the holiday weekend passes.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• computer does not start after power surge get to message x 300 128 MB BIOS

  I had a power surge of the House with the computer when I restarted I got a black screen with a 300 x is 128 MB bios p/n 113-a33406-100

  under that top left, a blinking cursor try don't reboot with pf8 no help

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the last splash screen that is displayed, until you get the error message?

  ·         Were there recent changes made on the computer before the show?

  Please give us more information on this. Also, disconnect any external devices (printers, USB Hub, drives external, etc.) and try to start.

  Error-PC x 300 and 128 MB BIOS p/n 113-A33406-100 is linked to the Dell computer. If so, I suggest you to contact the Support Dell about this issue and check. You may experience this problem if the BIOS is damaged.

• PC in a cycle of restarting after power surge

  Win XP SP 2
  NVIDIA 8800 GTS
  2 gig Ram
  P5N32 SLI
  Hi guys,.
  I hope someone can throw me a BONE here, because I don't know which way to go with this.
  Basically, power surge last night, my PC will now in a cycle of infinite when turned on reboot.
  I can't start in safe mode, as it hangs on the list of files. Cannot start last well-known, cannot start from the CD, at the risk of going as far as "Checking hardware" and restart.
  So, essentially I can't anything. I guess it's obvious that some hardware is fried, but I can't afford to replace things to chance - any suggestions on probable causes, or ways I can limit?
  Thank you
  KeV

  Hi KevTM,

  Method 1:

  I suggest to disable automatic system error reboot and check the error message.

  Prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  To do this, follow the steps below.

  To start Windows in safe mode, follow these steps:

  a. click on the electric start button
  b. to enter the Windows xp advanced startup option.
  c. when the computer starts up press and hold your "F8 key" who should bring up the "Menu Options advances of Windows". "»
  d. use your arrow to switch to "disable automatic system failure reboot" and press your enter key.

  Here, you will need to check the error message or you receive an error code.
  
  Method 2:

  Try to disconnect all the external devices connected to the computer except the mouse and keyboard and try to start the computer and check.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Pavilion dv7 - no wireless or bluetooth after power surge?

  Hi all

  I'm trying to diagnose a failure on a Pavilion dv7-4130sa running Windows 7.

  The WiFi was working fine until yesterday afternoon when I think he cut a power surge or a very brief power. It was not enough to reset clocks or turn off the TV, cable box, etc, but I had to reset the wireless router.

  Central heating also stopped working, due to a fuse and the defective pump - but maybe it's just a coincidence.

  Now, the wireless in the system tray icon shows a red cross with Windows indicating an error message...

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing.

  I know this isn't the router as my phone and netbook both work more wireless. I was thinking of doing a system restore, but I was wondering that if bluetooth and wireless cards are defective, this does not solve the problem.

  Any help or advice would be much appreciated.

  

  

  try to reinstall these network adapters in Device Manager or recovery manager

• After installation of the operating system 7, Photoshop CS does not work and is called a power PC program. It is an Intel machine and Photoshop has worked well with OS 10.6.

  After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.

  The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.

  You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.

  Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.

  Your have several options.

  (1) buy a new version of Photoshop that runs natively under Leo.

  2) back to Snow Leopard.

  (3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.

• Satellite P775-program of power surge on USB error message

  My P775 program is a month old.
  In the last two days, randomly when I plug in my iPhone I get the message "Power Surge on USB... ».
  If plugged into USB 3.0 Port, iTunes does not load, nothing happens.

  If plugged into the other Ports USB 2.0 on the right side, same as above, PLUS, my wireless mouse that is connected to another USB 2.0 Port on the same side has been rendered as well. Until the reboot.

  There seems to be no logic, that sometimes I have no problem, but rarely.
  Does anyone have a solution for this?

  I tried to uninstall all the USB USB and re start (so re - install), but I do not uninstall the software via the checkbox.

  Your help would be greatly appreciated.

  Try to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:
  Go to the Device Manager
  Expand Bus USB controllers.
  Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  Restart the computer and reinstall the USB controllers.

  Also check the Microsoft KB817900
  http://support.Microsoft.com/kb/817900

• Satellite A100-998: continue Error Message «Power surge on USB hub»

  Hello world.

  I am the new owner of a Satellite A100 laptop that has a little problem.

  When the laptop goes into mode and the monitor shutsdown, energy saving when I turn on the computer again, I always get an error message will appear in the system tray. The message says: peripheral USB A "Power surge on Hub Port" exceeded the limits of its hub port power. To solve the problem, click this message.

  First of all, I have 4 USB ports, but NONE of them are used. There's nothing attached to the laptop at all.
  Secondly, when I click on the box, I get 5 unknown USB devices shown with the yellow question mark next to them in the list and 3 unused ports, which seem to be ok, with no yellow question mark.

  Why is happening, with no device attached, or even installed on the laptop.

  Your help to solve this problem will be more appreciated.

  Rgds
  Neil.

  Hello, Neil

  What model of laptop you have exactly (A100-xxx)?