After a Windows Update, that the several apps shortcut does not work, I went back to the start screen.

Similar Questions

• Windows Update keeps up to date but does not work.

  Custody of update Windows saying he needs for the update (the Shut Down button has a shield with an exclamation point), but it doesn't seem to update.  When I click the button it goes through the normal shutdown procedures (he does not give notice of update and do not turn off the computer message) and when I turn back takes several minutes to load.

  When I checked the history of update, it shows my last update was updated on April 14, 2016.  Today's date is April 21, 2016.  There are several attempts to update from March 8 to March 11.  11, since there were three dates more updates successfully.

  I ran the troubleshooting on the Microsoft site and he claimed set the two elements.  It claims to solve "Problems of installation of the recent updates" and "registration for the Service is missing or damaged."

  I ran that it twice and still had the problem so I got it check "Background Intelligent Transfer Service".  Who sets only the "registration for the Service...". ».  Then I got it check "Microsoft Update" and now it's only the fixation 'Service record... '. ' but not '... installation problems. »

  I then tried Microsoft Fix It, but I don't see if she has nothing because he did not report.

  My computer is a Windows 7 Home Premium.  BTW, computer Windows 8 my wife has similar, but not exact problems.

  Any ideas out there?

  Make sure you are excluding the updates recommended to install important updates

  

• Thunderbird 31.5.0 does not work, I went back to 31.4.0 that works very well

  This morning 27/02/2015, Thunderbird automatically upgraded to 31.5.0. When I tried to download emails it stuck at "connecting to Server" and never went further. I have now done a system restore and went back to the 31.4.0 version and everything works fine. I have in the meantime disabled the automatic upgrade feature until I am assured that this problem won't happen.

  It seems that your firewall accepts even the old version and not the new updated version.

  Example: I use Norton Anti-anti-virus/firewall.
  Sometimes, after an update, Norton still thinks it can afford than the previous version, so that you get the kind of error that you are experiencing. I then close Thunderbird and go to Norton. Settings > network > Smart Firewall > program rules localize Thunderbird and position the 'allow' once, I had to block, ok then reset allow.

  If you are using another firewall/antivirus program, then there will be similar parameters. In order to check this first.

• ACTIVATING WINDOWS SAYS THAT MY EXISTING CODE NOW DOES NOT WORK AND ME LETS NOT TURN IT ON AGAIN?

  All of a sudden, I get a message saying to activate my windows vista premium, but this family edition has already been activated now he said that it is not and I can not re integrate it even though I know that it is valid?

  A list of Microsoft Knowledge Base articles is available to help you troubleshoot the error codes and error messages may be displayed when you try to activate Windows Vista
  http://support.Microsoft.com/kb/951287

  Error message when you start Windows Vista: "your activation period has expired".
  http://support.Microsoft.com/kb/925616

  Error message when you try to activate Windows Vista: "an error has occurred."
  http://support.Microsoft.com/kb/931276

  You may be prompted to activate Windows Vista on a computer on which Windows Vista activation was not previously required
  http://support.Microsoft.com/kb/931573

  TaurArian [MVP] 2005-2010 - Update Services

• After reinstalling Windows XP in Dell Dimension E310 sound does not work.

  Original title: help, my computer refuses to talk to me, I want someone to fix it just before I break it

  I have a dell dimension e310 that I eliminated once upon a time, I reinstalled windows, but in some sort I messed up the sound.  I have a magic Jack connected and speakers.  No sound at all comes from speakers or even the scren tv I hung as a monitor.  Under the audio portion in Control Panel, there is a device that will not start, I tried updating drivers allowing disabling unmuting inhibition etc... anyone on messenger who knows how to do this remotely? I'm a computer decoration and just want my returning speaker

  Hi Sandra,.

  How have you tried to install the drivers?

  You can check the Dell support link and try to install the update audio drivers.

  Drivers Dell & downloads.

  You can also read the following article and check if it helps.

  No sound in Windows

• Windows startup is not full, and then after a few seconds that the starting ends.

  windows startup is not full, and then after a few seconds that the starting ends.

  Original title: boot of win7

  Yes, it's the way it happens. All the other stuff are load - computer office, drivers, anti-virus, etc.
  It takes longer is that you have a lot of programs that load with Windows.
  and is faster if you have Windows on a SSD instead of a disk hard standard tray.
  Win7 also much faster than XP load, anything.

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.

  Help, please

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  I can not uninstall revel and reinstall it because I can not find it and because Windows store says it is already installed.

  Hoping someone can help.

  Hi JRSJS,

  Windows 8.1 makes it easy to find installed apps! Here is a link that can help you:

  Tip Windows 8.1: Find your installed applications. Windows 8 content SuperSite for Windows

  You can find this link also somewhat useful:

  http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-Windows-store-installed/

  I hope this helps!

  Glenyse

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• I got a notification of update for adobe CC but it does not work and now the Office does not

  I got a notification of update for adobe CC but it does not work and now the Office does not

  I actually just finished with support on a cat and it was corrected. Thank you.

• App Store does not work

  Dear Apple, personal,

  My App Store does not work. I'm not sure but I think since I upgraded my iOS version 9.3 the App Store has stopped working. I mean I tried to download several apps and their icons still display the word "pending"... It doesn't matter if I'm with a Wi - fi or cellular... It just doesn't... I have an iPhone 6 (bought on March 2016 in Houston - TX). Please, help me to solve this problem. Thank you very much. Paola Pereira.

  Have you ever tried to force restart the phone after the update into the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data, but force the reboot can cure some problems after installing new software or applications.

  Also try logging out of your account in the settings/iTunes and AppStore, reboot the phone and you log in again.

  In the event that you have implemented in settings/general/Restrictions of restrictions, turn them off and try again to update or download your applications.