After an automatic update of Windows and stop, Firefox does not remember my tabs open at startup. Better Privacy does interfere with Crash Recovery somehow?

Similar Questions

• How to disable the automatic updates of windows and to update on demand

  At the same time, I had disabled the automatic updates of windows and updated on demand by opening windows update.  Where is the place to activate and deactivate the automatic updates of windows.

  It worked.  Thank you!

  I wasn't able to get automatic updates to download a microsoft windows update.  The fix for microsoft in default mode indicated that he needed to be repaired and that fixed it.  When windows update was used again the update has failed once again.  The fix even that it was then run in aggressive mode and with a recheck has failed to correct the problem.  At each restart, automatic updates took the time to start producing a yellow shield and then pop-up reminders.  So thank you to help us with these questions to disable the automatic updates of windows.

  Thanks for posting the results of your efforts, I don't know they will be read and appreciated.

  UTC/GMT is 15:27 on Thursday, October 6, 2011

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• After an indexer update of windows has stopped working

  Hello

  I received and installed the following microsoft updates: definition update for Windows Defender-KB915597 (definition 1.1251.173.0)

  A security update for the Microsoft.NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2804580) Cumulative Security Update for Internet Explorer 9 for Windows Vista for x 64-systems (KB2829530) Cumulative for the stop bits X security update for Windows Vista for x 64-based Systems (KB2820197), a security update for Winsows Vista for x 64-systems (KB2829361) active Secureity update for Windows Vista for x 64-based Systems (KB2830290) and the tool REmoveal of malware Windows x 64-may 2013 (KB890830)

  After that when I rebooted my computer... my computer is very slow and then I had a series of errors in Search Indexer has stopped working:

  Product

  Microsoft Windows Search index

  Problem

  Stopped working

  Date

  16/05/2013 10:12

  Status

  Report sent

  Signature of the problem

  Additional information about the problem

  Product

  Microsoft Windows Search index

  Problem

  Stopped working

  Date

  16/05/2013 10:17

  Status

  Report sent

  Signature of the problem

  Additional information about the problem

  Product

  Microsoft Windows Search index

  Problem

  Stopped working

  Date

  16/05/2013 10:22

  Status

  Report sent

  Signature of the problem

  Additional information about the problem

  Therre are three more errors that I have will omit for bevity. I restarted my computer and it is lacking in the recommended disk check and delete several entries...

  Now, I do a scan for malware.

  The updates caused a questions? What could have triggered this?

  May I take with these deleted entries that my computer is ok?

  Thank you

  Hi Alex,

  This problem can occur if the update would have changed the parameters of indexation.

  Try the following and see if it helps.

  Method 1:

  Check if the search Windows service is turned on.

  a. Click Start, type services.msc and press ENTER.
  b. double-click Windows Search.
  c. set its startup type to automatic.
  d. set the service state to started.
  e. click OK. Check if it helps.

  Method 2:

  I suggest you to rebuild indexes and check if it helps

  Rebuilding the index can take several hours, and searches may be incomplete until the index is completely rebuilt.

  a. indexing by clicking the Start button, open the Options and then on Control Panel. In the search box, type indexing options, and then click Indexing Options.

  b. click Advanced. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Advanced Options dialog box, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3:

  I suggest you to scan Run System File Checker (SFC) tool and check if this may help.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  SFC Scan - http://support.microsoft.com/kb/929833

  Keep us informed on the status of the issue.

• Unable to connect after the automatic updates of Windows.

  I have two computers on my network, one with 7 and one with vista.  (US) both for automatic Windows update and yesterday, after both received updates, I couldn't go online.  Restored both and that solved.  Today it's the same thing.  I restored both and Windows updated together on manual.  Problem is I want to install updates, but you need to know what is happening.   Thank you

  Many other people have the same problem after the recent update of Win7.  A thread said that the culprit is update KB2705219 and you'll be OK if remove you it.  There is no other additional information that the user in question has done so successfully [I can't find the link, I checked both of these threads today].

  I have not tried to uninstall it I like my PC to install with a decent connection the last hours [no idea why].  I also have McAfee.

  - - - - - - - - - - - - - - -

  In addition, you should never uninstall McAfee or any other AV application unless you have a copy of the relevant utility uninstall application.  Results to omit this step can be severe and cause quite disconcerting & apparently unrelated symptoms.  I do not recommend this as a step for the problem today, but keep this link for when / if you decide to replace McAfee - McAfee Consumer products removal tool.  For other AV applications, see list of anti-malware cleaning - program uninstall tools

• After the automatic update of Windows 7 - Manager of tasks does not work

  Automatic update has occurred.  Now the Task Manager does not come with window with tabs upward.  Only a window with two columns ('Mission' and 'Status') and three option buttons ("end task", go to "and new task" ").  Even not a 'close button' - may not only close to the taskbar.

  Hi rw9683,

  ·         Have updates you installed?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2: Follow the steps in the article.

  Using the Task Manager: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/using-Task-Manager-frequently-asked-questions

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I recently got an automatic update of Windows and now my iTunes does not... and neither is NO sound at all. Help, please!

  Windows automatic updates from time to time, and since the last of them, not only my iTunes plays not anything... my sound on my computer does not work for anything.  I can't watch any videos/tv shows/listening to music... NOTHING.  Help, please

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Blue screen after the automatic updates in Windows Vista

  Automatic updates caused a blue screen that says STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, missing, or not accessible in writing.

  Ideas: I don't know what happened when it restarted it started this

  • will simply not get to start it to connect screen or system repair
  • Error messages: STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, absent, or not writable. :
  • Recent changes made to your computer: just the updates that was supposed to be important
  • What you have already tried to solve the problem: System repair, restoration of the system or safe mode do not work

  in this case, restore your netbook factory settings. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• My laptop took more than 12 hours to install an update from windows and is still doing, and will not be closed.

  I use Vista and an HP Pavilion laptop. I noticed the closing down and install updates logo was so I used it and my laptop started to install 2 updates (June 18, 2011). Finished the first, it was install the 2nd for more than 12 hours. The screen tells me not power off or unplug the machine.  The drive light flashes occasionally, it can come entirely for a second or two. What can I do? Surely it's far from since long to be normal and something went wrong.  The laptop keys are unresponsive. The cursor has changed to the blue circle by day and cycles but will not move with the mouse or key.  In the past, some updates took 3-4 hours, they have been great with more than a dozen of components, but never anywhere as long as it. I opened and closed the DVD several times, that works and is empty, just to see if anything's happening. What should I do? Should I continue to wait? If so how long? Can I really just ignore the warnings and turn it off and restart it?

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what anti-virus software is installed on your computer?

  I suggest to shut down your computer and try to install the updates manually.

  Method 1

  You can temporarily disable antivirus.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: after troubleshooting activate the anti-virus software

  Method 2

  You can download and install the update manually failed in a clean boot state.

  Step 1

  Put your computer in a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2

  Download and install the KB from the link below.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Check whether the problem is resolved.

• Set to automatic update ran CHKDSK and my computer will not connect

  Is there an automatic update on demand. When I turned on my computer, it ran a CHKDSK. I saw that he has deleted a file named $I381. When he started to update and got to step 3 of 3, he keeps trying to update. It restarts automatically and goes back to step 3 of 3 screen continuously. I tried closing down and turning them back, but not luck. Me should not be in a journal or anything. It just keeps trying to complete step 3 of 3.  Does anyone have an idea of what past? And how to fix it?

  See if this sugesstion can help you:- http://support.microsoft.com/kb/949358>

• Until about 1 month ago, I was able to sync my Blackberry with my office. He suddenly stopped my calendar synchronization, but synchronize my addresses. no doubt he stopped after an automatic update of Windows that nothing had changed.

  Version 4.6 of Blackberry. Windows Vista

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Goggle Chrome stopped working after an automatic update of Windows

  Hello

  I have WIN7 Home Premium upgrade of VISTA. Goggle Chrome had been working great, until a updated Automatic sneaked in this morning and updated on its own.

  I have uninstalled and reinstalled google chrome several times and did a scan full antivirus and no viruses were found. Chrome is currently at the

  computer... it opens a blank page and that's it.

  Some time ago I had this problem and I wish that I got my notes because an analyst suggested to remove a particular service with a 'C' early and as soon as

  as it has been deleted, chrome worked.

  Can someone advise how to correct my problem and google chrome issue.

  Thank you.

  Havanese

  Hi, this is really a problem for the next forum: https://support.google.com/chrome/table/3097302?hl=en&ref_topic=3421642

• 6.3 Lightroom refuses to open after an automatic update Windows 10 Pro

  My computer refuses to open Lightroom 6.3 after my software has been updated automatically by SM.  When I try to open Lightroom, I get a message dialog informing me that Lightroom has been checking the integrity of the Lightroom Catalog.  After 20 seconds of audit, the dialog box disappears and the Lightroom program does not open.

  When this error occurred initially, after the automatic updates of Windows Pro 10, I tried to fix the problem with Lightroom 6.2.1 opting for Lightroom 6.3.  After the Lightroom 6.3 upgrade, I am unable to open my Lightroom program and edit images.

  Hi Robert_Crawford,

  Could you please check the event viewer and let me know for the path of the defective module.

  How to check the event viewer: Photoshop Elements Editor Help. How to find the crash logs on to Windows

  Kind regards

  Tanuj

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer