After an indexer update of windows has stopped working

Hello

I received and installed the following microsoft updates: definition update for Windows Defender-KB915597 (definition 1.1251.173.0)

A security update for the Microsoft.NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2804580) Cumulative Security Update for Internet Explorer 9 for Windows Vista for x 64-systems (KB2829530) Cumulative for the stop bits X security update for Windows Vista for x 64-based Systems (KB2820197), a security update for Winsows Vista for x 64-systems (KB2829361) active Secureity update for Windows Vista for x 64-based Systems (KB2830290) and the tool REmoveal of malware Windows x 64-may 2013 (KB890830)

After that when I rebooted my computer... my computer is very slow and then I had a series of errors in Search Indexer has stopped working:

Product

Microsoft Windows Search index

Problem

Stopped working

Date

16/05/2013 10:12

Status

Report sent

Signature of the problem

Additional information about the problem

Product

Microsoft Windows Search index

Problem

Stopped working

Date

16/05/2013 10:17

Status

Report sent

Signature of the problem

Additional information about the problem

Product

Microsoft Windows Search index

Problem

Stopped working

Date

16/05/2013 10:22

Status

Report sent

Signature of the problem

Additional information about the problem

Therre are three more errors that I have will omit for bevity. I restarted my computer and it is lacking in the recommended disk check and delete several entries...

Now, I do a scan for malware.

The updates caused a questions? What could have triggered this?

May I take with these deleted entries that my computer is ok?

Thank you

Hi Alex,

This problem can occur if the update would have changed the parameters of indexation.

Try the following and see if it helps.

Method 1:

Check if the search Windows service is turned on.

a. Click Start, type services.msc and press ENTER.
b. double-click Windows Search.
c. set its startup type to automatic.
d. set the service state to started.
e. click OK. Check if it helps.

Method 2:

I suggest you to rebuild indexes and check if it helps

Rebuilding the index can take several hours, and searches may be incomplete until the index is completely rebuilt.

a. indexing by clicking the Start button, open the Options and then on Control Panel. In the search box, type indexing options, and then click Indexing Options.

b. click Advanced. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

(c) in the Advanced Options dialog box, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

Method 3:

I suggest you to scan Run System File Checker (SFC) tool and check if this may help.

The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

SFC Scan - http://support.microsoft.com/kb/929833

Keep us informed on the status of the issue.

Tags: Windows

Similar Questions

  • UPDATE for Windows has stopped working error 8007005

    Further to my previous question today: I have a Qestion previous Forum replied on this problem. I tried the instructions given on this occasion. Click on start / all the Programs/Accessories/click Run as administrator. Typed insfcdetails.txt I enclose the last lines of 20 or more for one of the Support M/S engineers to see, in the hope that a solution can be found.

    2010-09-01 18:30:23, CSI Info 000002b 7 transaction [SR] beginning verify and repair
    2010-09-01 18:30:27, 000002 b 9 CSI Info [SR] verification complete
    2010-09-01 18:30:27, 000002ba CSI Info [SR] components check 100 (0 x 0000000000000064)
    2010-09-01 18:30:27, 000002bb CSI Info transaction [SR] beginning verify and repair
    2010-09-01 18:30:29, 000002be CSI Info [SR] verification complete
    2010-09-01 18:30:30, 000002bf CSI Info [SR] components check 100 (0 x 0000000000000064)
    2010-09-01 18:30:30, CSI Info 000002 c 0 [SR] beginning operation check and repair
    2010-09-01 18:30:32, CSI Info 000002 c every 2 check [SR]
    2010-09-01 18:30:32, CSI Info 000002 c 3 [SR] components check 100 (0 x 0000000000000064)
    2010-09-01 18:30:32, CSI Info 000002 c 4 [SR] beginning operation check and repair
    2010-09-01 18:30:35, CSI Info 000002 c 6 [SR] check all the
    2010-09-01 18:30:35, CSI Info 000002 c 7 [SR] components check 100 (0 x 0000000000000064)
    2010-09-01 18:30:35, CSI Info 000002 c 8 [SR] beginning operation check and repair
    2010-09-01 18:30:37, 000002 ca CSI Info [SR] verification complete
    2010-09-01 18:30:37, 000002cb CSI Info [SR] components check 86 (0 x 0000000000000056)
    2010-09-01 18:30:37, CSI Info 000002cc transaction [SR] beginning verify and repair
    2010-09-01 18:30:40, 000002ce CSI Info [SR] verification complete
    2010-09-01 18:30:40, 000002cf CSI Info [SR] repair 0 components
    2010-09-01 18:30:40, CSI Info 000002 d 0 [SR] beginning operation check and repair
    2010-09-01 18:30:40, CSI Info 000002 d every 2 repair [SR]

    cordially Philip21

    Hi PA bear

    Thank you for your interest for my problem. Another long session of trial and error on this issue. I tried different solutions offer after having read a few other answers users forum, tried to find PowerShell in the M/S Download Center but failed in the present. At the end of the day, I gave up and disconnected.

    I started my PC this morning and found that M/S Windows 7 has set its self, so Windows Update now as it should. What was wrong with Windows for 24 hours? I got a popup saying there had been a failure, and a report was compiled and sent to M/S.

    I tried to reload the McAfee security software but failed, which resulted in an email exchange with a member of the McAfee technical support team that took control of my keyboard and mouse. I noticed that it resets the default values for the original settings and remove the history of Solution Explorer. After these adjustments, I was able to reload the McAfee security software and fortunately my PC is protected and that it works correctly.

    What was the problem with M/S Windows 7 on this occasion is a mystery to me, I thought for a moment that I had picked up a virus. I don't think that this report will be of value to other users?

    concerning

    Philip21

  • Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

    I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

    This happened to someone else? Is it I can do it fix it?

    Hello

    Since you get such a serious mistake, I would use the free incident reports.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows 7 Pro 64, windows update/Defender/firewall has stopped working. Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.

    Original title: Windows 7 Pro 64, windows update/Defender/firewall has stopped working.

    I have Windows 7 Professional 64 bit installed, after the time of my last updated 31/7, my windows update has stopped working, and no so Windows defender and firewall.  Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.  Update Windows to 7.31 was an update of the Defender, however, windows update will not give me the option to uninstall this update because the Defender has completely disappeared from the prompt that allows you to choose which puts up-to-date to uninstall. Is it possible to manually remove somewhere else?

    I ran SFC/scannow and I WAB32res.dll has been altered, so I copied the file on my windows 7 CD for 64 Professional (from program files/common files) and copied and replace my program.files/common files one.  I restarted the SFC and the same error occurred.  I had 5 errors like this:

    2012-08-03 19:15:59, 000002fb CSI Info [SR] cannot repair the military record [l:24 {12}] "wab32res.dll" Microsoft-Windows-WAB-Core, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch. "

    I also ran Microsoft Safety Scanner Scanner, he finds 16 errors and fixed them (I saved the names), but even after I reset the computer my Windows Update/Defender/firewall STILL does not work!

    Anyone have any ideas? Especially how to fix 'wab32res.dll"maybe that I recorded it in the wrong place?

    I noticed there is one in each 'program folder' folder (program files x 86 and regular for 64 bit).  Is also wab32res.dll somewhere in system32?

    Thank you!

    Hello
     
     
    Method 1: See the following steps:
     
    a. at a command prompt, type the following command and press ENTER:
    takeown /f Path_And_File_Name
    For example, type takeown /f E:\windows\system32\jscript.dll.
    b. type the following command and press ENTER to grant administrators full access to the file:
    ICACLS Path_And_File_Name/grant ADMINISTRATORS: F
    For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.
    c. type the following command to replace the file with a good copy of the file:
    Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination
    For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.
     
     
    Method 2: Since all this started after a Windows Update, restore the computer to a date where updates are not installed.
     
    Reference:

    System Restore: frequently asked questions:

    Method 3: After System Restore, windows updates are available again, put the computer into State of startup in minimum mode and then allow Windows Update and see if that helps.
     
    Reference:
     
    A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

     
    Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.
  • I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

    Original title: Win32/Small.CA

    I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

    Hello
    Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
    It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
    Brian
  • Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

    On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

    Hello

    1. have you made changes on the computer recently?

    Method 1.
    Let us scan SFC and check that it prevents this error to occur.
    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
    To do this, follow these steps:
    a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    b. type the following command and press ENTER:
    sfc/scannow
    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
     
    More information on SFC scan found in this document:
    http://support.Microsoft.com/kb/929833

    Method 2.
    a. also, you can try again user account if the problem is resolved.
    Create a user account
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
     
    b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
    Fix a corrupted user profile.
    http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
     
     
    Let us know if that helps.
  • Updates Windows has stopped working for months in a row

    For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).

    Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.

    Laptop HP 365

    Windows 7 Home premium

    I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)

  • Windows has stopped working. Window is to check a solution to the problem...

    I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

    Original title: Windows Vista 32-bit Edition home

    Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

    HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

    Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

    appreciated.

    Thank you

    EJ

    Hello

    1. you remember to make changes to the computer before this problem?

    Method 1:

    If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2:

    Put your computer in a clean boot state and then check if the problem persists

    Follow step 1 in the link.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

    Method 3:

    The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

  • When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

    twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

    I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

    Hi BetheForcia,

    Exactly when you receive this error message?

    Usually, this can happen due to data execution prevention.

    In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

    What are the information in event logs? (Event Viewer)

    You can try to add it in the exception for the prevention of execution of data and check that it works.

    a. go to Start, Control Panel and click on System.
    b. now, click on the Advanced tab, and under performance, click settings.
    c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
    d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
    e. click OK , and then click OK to exit

    Hope the helps of information.

    Please post back and we do know.

  • Aero in Windows has stopped working

    I am running Windows Vista Home Premium with Service Pack 2. Aero in Windows has stopped working. When this happened once before going to the control panel > change the color scheme and selected Windows Aero, but now this option is not listed. Checked the help and as advised checked my screen resolution and I saw 32-bit color, the verified value Advanced Configuration monitor and I saw this refresh rate is 60 Hz. Then forums got advice to run sfc/scannow and it came back and told me to Resource Protection Windows did not find any breach of integrity. Finally, taking advice to check that the graphics card by going to Device Manager but no device had anything by them which suggests that they do not work.

    Help the old windows look terrible after using Windows Aero

    Brett

    Hello

    Make sure that you are logged on as ADMINISTRATOR

    My Vista Aero Glass is turned off, how can I enable them again?
    http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/

    To the need to update or reinstall the video driver (it's a good idea in any case).

    Solve problems with Windows Aero
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

    How to enable or disable transparent Aero Glass on Vista
    http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html

    --------------------------------------------------------------------

    This utility, it is easy see which versions are loaded: (updated video/Display drivers and others)
    According to the needs.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My option "open in a new tab in the same window" has stopped working.

    After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

    As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

    Does anyone have a solution?

    Hello

    What version of Internet Explorer work?

    You can try the following steps and check:

    Method 1:

    You can reset Internet Explorer 9 settings and check

    http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

    Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Method 2:

    How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

    http://support.Microsoft.com/kb/318378

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Important note: ignore in place update from the above mentioned link.

  • UPDATE ~ 1.EXE has stopped working

    Thanks for any help on this;

    The error "UPDATE ~ 1.EXE has stopped working" arises for only 1 user on a server terminal server 2008 Enterprise 32-bit Edition. About 80 users connect to 4 servers on a cluster and present a single user is the lone wolf who gets the error message. He says it appears all about 30 minutes. I literally have no idea where to start.

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: UPDATE ~ 1.EXE

    Application version: 0.0.0.0

    Application timestamp: 2a425e19

    Fault Module name: KERNELBASE.dll

    Fault Module Version: 6.1.7600.16385

    Timestamp of Module error: 4a5bdbdf

    Exception code: 40010006

    Exception offset: 0000b 727

    OS version: 6.1.7600.2.0.0.16.7

    Locale ID: 1033

    Additional information 1: fc98

    More information 2: fc989e251a1dc78f16199b78d1e7814b

    3 more information: f3d0

    Additional information 4: f3d0eda1f28439ce691a4e21b0e9ba44

    If additional information is needed, please let me know. I'm happy to provide.

    Thank you all

    Hello

    Sorry for the delay in responding to this message.

    As you get this on the domain network, ask to view the query in the TechNet forum for better support.

    TechNet Forum

    Answer us if you need help with Windows problems and we will be happy to help.

  • Explorer Windows has stopped working when you click FLVfile

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

    Hello

    What version of the windows operating system is installed in the computer?

    I suggest you to see link and check. (That applies to windows vista and windows 7)?

    Error: Windows Explorer has stopped working

    http://support.Microsoft.com/kb/2694911

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  • My computer keep saying windows has stopped working

    My computer keep saying windows has stopped working. What can I do to solve the problem?

    Hello

    1. for how long are you facing this problem?

    2. did you of recent changes made to your computer?

    3. what operating system you run on your computer?

    I suggest that you perform a clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Explorer Windows stopped working

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

Maybe you are looking for

  • I can't open links in google search using Firefox.

    I can open the links when I search with Bing or Yahoo and Google looking for work when I use IE, so it's only when I use Google with Firefox. Also, if I try to open links in a new tab, I get error 404. For example, if I try to open bbc.co.uk/news fro

  • A60-392 keyboard - how to turn off the key near the space

    close to SPACE (right) key on the keyboard of my laptop is the key to bonus (black, no signs). When I hit it is written ' / '.on the screen. How to disable this button (or remap)? usually, I used in this place of key ALT (on a standard keyboard) and

  • Windows Vista - my worksheets had icons for word documents or installation of programs icons

    When starting my computer, why Office five of the six albums icons for spread sheet documents appear as icons for word documents and the icon for the sixth broadcast sheet paper appears as one of an executable program?  My computer is infected?

  • Unable to backup because of the volume shadow copy error 0 x 80042302

    Hi all I'm trying to backup to an external hard drive and I keep getting the error 0 x 80042302. It is said that "a volume shadow copy service has met an unexpected error.check the applications for more information event log" I did what the other thr

  • implement the local high scores

    I do this app and now I ran into a bottleneck. Theres this record I wish to implement, here where demand will only store a variable for its file system, access every time that the application starts and crush the variable when there is a higher score