After an update of Window Vista Business, I lost the option of hibernation

After an update of Window Vista Business, I lost the option of hibernation

How can I solve this problem?
Thank you

Hey Joe,

What is the number of the Windows Update installed recently?

I suggest you to follow the steps from the link and check if it helps.

How can I enable hibernation on my Windows Vista computer?

I hope this helps.

Tags: Windows

Similar Questions

  • I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

    I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

    Thanks in advance...
    Joe

    Hello

    Try this link:
    http://support.Microsoft.com/default.aspx?kbid=929658
  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • White screen Windows Update in Windows Vista Business

    Dear Sir/Madam,
     
    I am writing to you on the white screen of Windows Update in Windows Vista professional.
     
    Description of the problem: our company PC using Windows Vista Business Service Pack 2. Some computers may not be updated. When I check the update of Windows on the PC, it shows the white yellow screen and there is a text: #elementModuleHeaderText #.
     
    On nearly 40 PCs have this problem. Here I show an example of a PC.
     
    OS: Windows Vista Business - Service Pack 2
    Product ID: 89576-355-6928971-71708
     
    The suggestions that I made:
    1. use the auditor of file system (CFS) to scan system files
    Please help me solve this problem.
    Looking forward to your support
     
    Thanks & best regards,
    At sang Phan Van / MR.
    COMPUTER service
    USOL'YE VIETNAM Co., Ltd.
    Address: 20th floor, Tower of Hoa Binh, 106 Hoang Quoc Viet Str, Cau Giay Dist., Ha noi, Viet Nam
    Phone: 84-906-665-115
    Office phone: 84-43-755-6500-Ext: 247
    Office Fax: 84-43-755-6501
    E-mail: * e-mail address is removed from the privacy *.

    Hi Mr sang,

    Systems on your network are joined to a domain?
    If so, they use Windows Server Update Services (WSUS) to get their updates?

    If you use WSUS, you should post your question in the forums found here WSUS:
    http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

    If you do not use WSUS, but your systems are on a domain, you should post your question in the forums Vista IT found here:
    http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

    If the above do not apply, you find the same update white screen when you run updates under a new profile?
    Also, if you connect to a user in safe mode account, you get the same results?

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

    update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

    Hollow salvation of the farm,

    Try these steps
    Method 4: Reset the contents of the Catroot2 folder
    go to start > all programs > Accessories > right click on command prompt > run as administrator
    Reset the contents of the Catroot2 folder. To do this, follow these steps:
    Type the following commands and press ENTER after each command:
    net stop cryptsvc
    MD %systemroot%\system32\catroot2.old
    xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

    output
    Restart the PC and then
    Method 8: Rename the folder C:\Windows\SoftwareDistribution
    Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:
    Open an administrative command prompt window.
    Run the following commands and press ENTER after each command:
    Net stop wuauserv
    CD %SystemRoot%\System32
    Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.

    also try to scan your computer
    Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

    To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

    http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

    To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

    To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

    Please come back if you need assistance
    Thank you
    Makoi
  • A security update for Windows Vista for failure of the 32 x-based systems (KB2585542) installation code 8024200d

    I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit.  Whenever I try to install it, I get one above mentioned the error code.  I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.

    Hello

    You are able to install all other updates of Windows without any problems?

    Follow these methods.

    Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.  After you run the analysis tool, try to install the update.

    You can download & run the system update readiness tool and check.
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Method 2:  If this does not help, you can temporarily disable antivirus software, and then try to install the update.
    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:  If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update.  Follow these steps.

    Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, place the computer back to normal following KB article.

    Step 2: Now, try to install the update manually.
    You can go to http://www.microsoft.com/download and use the number of the update to download and install it.

    Reference: the problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • After auto update installed, Windows Vista does not start

    Individuals:
    Windows Vista Home Premium w/Service Pack 1 installed
    Dell Studio 1737, 64-bit

    Problem:
    Earlier this week (I think it's the 16th), my computer has installed an automatic Windows Update and restarted.  When she came back to the top, it says Windows could not start and asked if I would so he can try to restore the operating system to a previous point in time or if I try to restart Windows.  I tried to start Windows again (this time with my fingers crossed), but got the same message.  So I went for the #1 option and after half an hour, or so, I got a new error.  To be honest with you, I have seen so many mistakes in the last week, I don't remember exactly what he said, but I wanted to go to the advanced options, where I could choose a restore point manually.  I have put back to point restoration 6/15 and had no problem getting Windows to start.  Unfortunately... Windows REALLY asks me to install this update so at 03:00, after spending at least an hour and a half on the issue, he did an update automatic, rebooted and Windows wouldn't start again.  So, again, I am through the whole process (it's the only way I found to manually choose a restore point) and me to start Windows.  Then I disabled the automatic update in the hope that I could skip this update.  However... Windows has put the updates to install every time I put it in mode 'sleep'.  You can see where I'm going with this.  Now, any time my computer stops for some reason, Windows refuses to restart.  To make matters worse, the last time I had to go through this process, for some reason any he would not support up to 15 and I had to try again and it backwards until the 13th.  Please help me!

    You did little to restore the system.

    Hide this particular update, if you do not need!

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    Mick Murphy - Microsoft partner

  • Capacity wireless suddenly stopped working after an update of Windows Vista.

    Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

    original title: can't find the wireless device

    Hello again, Kathy,

    More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
    Look for something listed as network radio or wireless card and make sure that it is set to enable.
    The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
    A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
    WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.
  • I got errors 0xC004D401 and MS10-070 and MS11-025 after doing updates in Windows Vista

    I have windows vista home... I had two 'holes' of security, and I was cleaning my computer a few nights ago and I'm awake and THE WHOLE THING WAS wiped OUT! Just before I fell asleep, I was reading it says updating security MS10-070 - 3.5 and Microsoft Visual C++ 2008 MS11-025 were 'holes' and if it is determined that someone could take over my whole system. Via: Advanced System Care 4.I pressed the fix but it would not download install it and kept saying that some problems could be corrected if I restarted my computer. That's when I fell asleep and I woke up to oh yes reboot and I login and wat the * GONE. I reinstalled windows and all was good for a day and then a mistake 0xC004D401 said that unauthorized changes were made for windows. About 5 x that day, so I thought to restore it right, then he said Can not backup error internal 0xC004F027... AND I STILL HAVE THE SECUIRITY HOLES ERRORS? THEN install windows comes a few hours later saying download SP2, so I did and so far everything LOOKS ok, there has only been one day... but Windows Defender won't turn on? And I had a lot of malware protection virus protectors, all that now I have different but her part THE STRANGEST was that I did Control Alt Delete to the Task Manager to check the USERS - and this lil tab disappeared I couldn't get into my control panal as who did not exist either, and I did something different , but stop it and a few hours ago I checked and was back to the USERS tab and now I can get in control pave-Im not waiting for something else - I think that I'm being watched for what I don't know - or it is an enemy that I hate and she hates me-not smart enough to do that but IT is. I'M trippen or what?

    Hello

    0XC004D401 error can occur for various reasons. I suggest you follow these steps:


    Step 1
    : perform a clean boot in order to check whether a third-party program is causing the problem.

    Visit this article for assistance:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    NOTE: Please ensure to start the computer in normal mode after a repair. Follow step 7 of the above article.


    Step 2
    : validate your copy of Windows Vista.

    Go to this link:
    http://www.Microsoft.com/genuine/default.aspx


    Step 3
    : scan Run SFC (System File Checker).

    Scan SFC will Windows replace corrupted or missing system files on your computer. Scan sfc enforcement procedure:

    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow

    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833

  • After recently updated to Windows 7, cannot connect with the Microsoft Bluetooth 6000 keyboard.

    Original title: Bluetooth Microsoft 6000 keyboard installation

    I recently updated my WIN 7 and since then I could not connect with the keyboard. I am able to recognize and enter the numeric code and the keyboard will appear on the list of devices in the control panel. After that, the Red/Green flashing on the remains of the keyboard and the device disappears from the control panel. Any suggestion would be appreciated!

    Hi CliveOshry,

    You can try the following steps and check if it helps:

    Method 1:

    You can try to download and install IntelliType Pro 7.0 depending on the version of Windows you are using.

    For the 32-bit version: Download IntelliType Pro 7.0

    For the 64-bit version: Download IntelliType Pro 7.0 for 64-bit

    Also check if there are optional updates available for the keyboard in the windows updates.

    For more information, see the articles:

    Automatically get recommended drivers and updates for your hardware

    Update drivers: recommended links

    Method 2:

    You can review the article and check if that helps:

    Resolve the failure of mouse or a Bluetooth keyboard to function

    Method 3:

    You can try to run the hardware troubleshooter and check if it helps

    Convenience hardware store

  • I have Windows Vista DVD but lost the product key, can I get a new key?

    Origianal title: lost cd key.

    Hello!

    I have Windows Vista dvd and reception, but I lost my cd key.

    I can again cd key?

    Hello

    This should help you.

    http://support.Microsoft.com/kb/811224?WA=wsignin1.0

    How to get a replacement product key

    If the software is preinstalled on your computer, contact your computer manufacturer to obtain a replacement product key.

    To replace a Microsoft product ke for a product you have purchased separately from your computer, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

    Contact Microsoft

    (http://support.microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS)

    Note When you contact the Customer Service of Microsoft and supported for a replacement product key, you may have to pay a fee. You may also provide information on your computer or from the product CD or DVD when you talk to the customer service representative.

    See you soon.

  • Reinstall Windows Vista, when I lost the CD

    Hello

    I bought my laptop about 18 months ago and it came with the OS CD. I recently moved and lost the CD in the gesture, but because of a few mistakes, I need to wipe my computer and reinstall Vista. Is it possible to do this without the CD?

    Thank you
    Suzanne

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    Or borrow a good DVD (not Dell, HP, etc.) Vista.
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • When i proform windows update on the "update for Windows Vista (KB972145)' I get the error code: 80070020 __what I can do to fix this? ____

    I did everything here
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/407b76bc-2BBA-42d4-9e9d-34dab373979c

    Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates:
    http://support.Microsoft.com/kb/883825

    Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2) when you post in a forum or a newsgroup. Please do it in your next reply.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    Have you met either of the two scenarios described in the Symptoms section of http://support.microsoft.com/kb/972145?

    Have you tried to install the update manually by using the link in KB972145 to download the installation program?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • In a x 64 VMware virtual Windows Vista Business Edition PC, the Windows experience index assessment "cannot be completed."

    I tried to rate of virtual Vista WEI... three times. All three times, the assessment completed, but I got an error message after he ended saying that WEI assessment cannot be completed. Here is what the error message says Word for Word:
    _____________________________________________________________________________________________________________________________
    Windows experience index...

    Cannot complete the assessment.

    The assessment or other operation did not completely succeed.   This is due to an error reported from the operating system, driver or other component.
    _____________________________________________________________________________________________________________________________
    These extra spaces have been in the error message - I DON'T work the SPACEBAR twice more by mistake. What should I do about it? But hey, at least I can use Windows Aero.

    Just checked the RAM card on the virtual machine, and it is 128 bytes. Not megabytes or kilobytes, a few bytes. I'll see if I can adjust the amount of video RAM in BIOS and see if that solves the problem.

    Hello droid,.

    Your question is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting in our virtualization Technet forum

  • security of dec 24 2009 updated for Windows vista (kb958690) failed. and the security update for windows vista December 24 2009 (kb960225) failed, (kb9772), December 24 2009 doesn't have all three update failed. I want to know a solution to these problems

    I tried three times to updaed with no sloution. I also need updated my browsers to internet explorer 8 with space for 32 bytes. need soultion to this problem too.

    loveforsasha,
    We need more detailed information.
    What version of level pack Windows\service are you?
    What is the error code that you found these updates?
    Other updates have been installed?

    Here is some information, you can begin.
    Solve Windows Update installation issues
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for