After auto-update to 38.01 - Firefox barely works.

Similar Questions

• XP crashed after auto update

  XP crashed after auto update on asus netbook. No recovery method does work it IE safe mode, last known config, bootlogging etc. Systems freezes at \drivers\mup.sys

  
  «.. . We have revised the installation packages for MS10-015 with new logic that prevents installation on systems if there is certain abnormal conditions of the security update. These conditions may be the result of an infection by a computer such as the Alureon rootkit virus. If these conditions are detected, the update will not install, and the result will be a standard Windows Update error. If a user receives this error, they should go to the following landing page for additional help:

  http://www.Microsoft.com/Security/Updates/015 "

  Source & more: http://blogs.technet.com/msrc/archive/2010/03/02/update-ms10-015-security-update-re-released-with-new-detection-logic.aspx
  

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• What should I do if after an update is installed something no longer works?

  What should I do if after an update is installed something no longer works?

  Hi JohnEvrard,

  It depends on the update and the program that was hit.

  To find out what update is causing the problem note the installed updates. You can perform the system restore and restore the system to the date that the program worked very well.

  Once the restore is complete, install the standalone product of each update and check if the problem occurs in the program.

  System Restore: frequently asked questions:http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  I see you have another post in which you mentioned Windows Live mail orthographic corrector does not work after update.

  If the query in this post is in regards to Windows Live mail, I suggest you follow the steps provided by PA Bear for better assistance.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've updated my information of payment more than four times, but my annual creative cloud plan doesn't seem to work? It is said that it will update within 24 hours after I update, but it seems to never work.

  I've updated my information of payment more than four times, but my annual creative cloud plan doesn't seem to work? It is said that it will update within 24 hours after I update, but it seems to never work.

  Hi Nick, your prepaid subscription expired more than a month, then I recommend you to buy a new creative.adobe.com/plans plan

  For questions about billing, it is best to contact the Adobe Support first to ensure that we can sort on the side account prior to troubleshooting, etc. Let me know if you have any questions!

• Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  What and how do I do to solve this problem? Thanks in advance!

  Hello Julian

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe ID

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not solve the problem for you, let know us.

  Thank you

  Scott

• Disable the auto restart after auto update

  I can't express how frustrating, it is at the foot of two hours of hits for a drink, to return to my job cancelled by an automatic restart after Windows update. This kind of thing has happened several times. And as I have a Vista Home Premium, I did not have access to group policy to turn off. So guys, how to prevent windows to lose more of my work with its seedy characteristics? Thanks in advance.

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  «Using Windows Update in Windows Vista»

  Change how it gives you the updated to: ' check for updates but let me choose etc "> etc.". "

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• No Audio output device is installed - no sound after auto update yesterday

  After an automated update yesterday, my sound no longer works on my Dell XPS 15.  There is a red "X" on the "speaker" icon.  When I was looking for solution last night, I tried a lot of things and then saw a comment on a possible error in the download, but now I can not find this comment.  If there is an error in the update, will there be a fix soon?  I would use my sound.  Thank you!

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  See you soon.

• After auto-update today I stupidly agreed to return to its default state of Firefox. Is there a way I can undo this? (I lost all my sites speed dial).

  After installation auto-implementation to date this morning a dialog box appears asking you if I want to go back to its default state of Firefox. I foolishly said yes and now I lost all my Speed Dial, URLs and passwords registered thumbnails. Is there any way I can cancel it to go back to the way Firefox has been implemented and work yesterday?

  No, no, unless you have backed up your Firefox profile to restore the default state.

• After have updated to the latest Firefox, uninstall of synchronization and synchronize via my account, computer not will bring up tabs of synchronized computers.

  I followed all the steps to upgrade to the latest version of Firefox, uninstall the synchronization of the former (which never worked anyway) and create a Firefox account to install new synchronization. Synchronize Firefox tab as synchronized computers, but even after the computer restarts, it does not bring the tabs in the browser from another computer. Both have all the boxes ticked on sync.
  A computer has XP, my laptop has Win7.

  The list of tabs on other computers located in the drop-down list in the history.
  The history button is in the '3-bar' drop-down list in the Firefox menu button.

  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox#w_a-handy-new-menu

• Problems after auto update

  After an automatic update I lost access to the control panel and am now unable to run some other updates

  Hi Welsh Dragon,

  For the issue of the Control Panel, you will need to scan SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the previous step fails, then reset the Windows Update components and check if you can access Windows update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After auto update installed, Windows Vista does not start

  Individuals:
  Windows Vista Home Premium w/Service Pack 1 installed
  Dell Studio 1737, 64-bit

  Problem:
  Earlier this week (I think it's the 16th), my computer has installed an automatic Windows Update and restarted.  When she came back to the top, it says Windows could not start and asked if I would so he can try to restore the operating system to a previous point in time or if I try to restart Windows.  I tried to start Windows again (this time with my fingers crossed), but got the same message.  So I went for the #1 option and after half an hour, or so, I got a new error.  To be honest with you, I have seen so many mistakes in the last week, I don't remember exactly what he said, but I wanted to go to the advanced options, where I could choose a restore point manually.  I have put back to point restoration 6/15 and had no problem getting Windows to start.  Unfortunately... Windows REALLY asks me to install this update so at 03:00, after spending at least an hour and a half on the issue, he did an update automatic, rebooted and Windows wouldn't start again.  So, again, I am through the whole process (it's the only way I found to manually choose a restore point) and me to start Windows.  Then I disabled the automatic update in the hope that I could skip this update.  However... Windows has put the updates to install every time I put it in mode 'sleep'.  You can see where I'm going with this.  Now, any time my computer stops for some reason, Windows refuses to restart.  To make matters worse, the last time I had to go through this process, for some reason any he would not support up to 15 and I had to try again and it backwards until the 13th.  Please help me!

  You did little to restore the system.

  Hide this particular update, if you do not need!

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Mick Murphy - Microsoft partner

• Profile of user lost after auto updates

  After updates have been loaded automatically, after the start, the Office now says the user profile has been lost.  It displays an icon containing our name below, but when I click on it, it is also with not found user profile.  What's past and how to fix it?   HELP and thanks!

  Hello

  1. are you referring to the Windows security update?
  2. What is the update number windows?
  3. are you able to boot to the desktop?
  4. what exactly happens when you restart the computer?
   
   
  I suggest you follow the links:
   
   
  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account:
  http://support.Microsoft.com/kb/940765
  If you are able to log on the computer then you can check what update has been installed.
   
   
  See the Windows updates are installed:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
  
  It could be useful!

• Cannot connect to internet after auto update under Vista.

  Original title: System shows the connection, but cannot connect

  After an automatic update in Vista in mid-August I can no longer connect to the internet.  My system tray shows that I am connected but I can't.  I'm on a DSL wireless connection with a desktop computer (one does not) and a laptop with XP that always works very well.  I re - configure the modem, uninstalled, and reinstalled the wireless card, has run an anti-virus in safemode, uninstalled the Qwest connection network and re-installed AND uninstalled the update to Vista.  I even tried the system restore to an earlier time.  Nothing.  Internet diagnosis says that it cannot solve the problem.  I have read other forums on the UN-checing proxy settings but mine have not been verified.  I re-set my settings IE8 by default.  Uninstall protection against viruses... What did I miss?

  Hi dozerman5676,

  -You receive an error message/code when you try to connect to the internet?

  Follow the steps below:

  Method 1:

  Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:

  The problems of Internet connection

  Method 2: Reset Internet Protocol (TCP/IP)

   

  To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.

  See How to reset the Internet Protocol (TCP/IP)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]