After BIOS update DVD drive no longer works

I make a test with the new bios on my Satellite A80-131.

I install the new bios 2.60 more old bios (2.40) and my MATHISITA DVD does not read or write DVDs more!

I reinstall Windows XP Home with the new bios and the my DVD-MATHISITA is not read or write DVDs more!

I reinstall old bios (2.40) with winphlash (phoenix bios) and my DVD-MATHISITA read or burn DVDs new!

Conclusion: If you have any problem with DVD-ROM to reinstall your old bios.

Hello

Well, it of strange but thanks for the information. It could be very useful for other users.
By the way; on the Toshiba driver page, you will find the update of the firmware.
Maybe after the upgrade of the BIOS you should make the reader to update firmware.
But as far as I know that you can not do one reveres firmware. After the new installation of the firmware, you will not be able to install an older version.

So in my opinion you shouldn't do any upgrade now. If you drive works so don t change anything ;)

Tags: Toshiba

Similar Questions

  • My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

    Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

    Hello

    Code 39 means that the driver is corrupted or missing.

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
    Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
    These however is a possibility depending on which and how many you have installed.

    Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
    allows the reader to work (not re - install until the issue is resolved).

    -------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • After the BIOS update DVD driver not reading not DVD - Sat A80

    Hello

    I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

    Can I reinstall the old bios? Can I reinstall the firmware?

    Thank you
    Ronai Lisboa

    Hello

    Strange!
    On the Toshiba driver page, you will find also 2 Firmware updates.
    Check which drive you unit and try to update the firmware.
    Also try installing the DVD ram driver.

    PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

  • Portege R500 - CD/DVD drive no longer works

    Does anyone found a resolution to this?

    Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

    Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

    Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

    For the optical drive firmware update help? Or is there some other fix?

    Hello

    > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
    This could be the key;
    Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

    Again, restart the laptop.
    After new check restart if the CD/DVD drive has been recognized again.

  • DVD drive no longer works and disappears from MS explore

    New "TSSTcorp CDDVDW SH-S223C ATA Device" Samsung dvd player is visible in Windows Explorer after starting the machine.  He can see an audio CD.  However, when a DVD is inserted it reads very slowly, then stops and the drive is no longer visible in Windows Explorer.

    I updated the firmware with a utility Samsung called Firmware Samsung ODD liveupdate, but this made no difference.

    Hello

    For a new disk that should really be fixed/replaced under warranty.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    --------------------------------------------------------------------------------------------------------

    You can try these but it seems that the drive has a hardware problem.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • DVD drive no longer works Code 10 failure initialization

    My computer is less than two years.  It came with Vista.
    The CD/DVD multi Recorder initially worked, but has stopped working.
    Diagnosis say the drivers are up to date, but there is a problem with the device:
    HL-DT-ST DVDRAM_GSA - H60N ATA.
    I had not used a lot, so it should not really be worn.
    My problem looks like the display by "Jackie", but I noticed that our device numbers are different.
    Please notify.

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Please make all below even if you have done some before as it is often the set of operations which solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • DVD drive no longer works after the installation of PowerISO

    I recently installed PowerISO and he took my physical DVD drive so I can't use it. The drive does not appear in Windows Explorer. The drive appears in the parameters of the material, but with the note that the driver has been disabled, and another driver provides functionality. There are questions on the net on this WRT to PowerISO (wish I had seen these before that I loaded it) but no real and tangible solutions. I tried to uninstall the device, reload the drivers and even bought a new DVD player and installed it but it happens with the same question. None of em fixed work. I did a complete refresh of BIOS and CMOS, nothing helps. Readers do not appear in the BIOS settings but show (with numbers) to the setting of the material. I also removed PowerISO, which did nothing. Then I re-installed and changed the setting Virtual Drive 'None' in thinking that this was taking on my physical drives. Nothing. So I still once uninstalled.

    In addition, if the problem persists, can you check the following registry key? :

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

    If so, for UpperFilters and LowerFilters, value which is listed under "data"?

    There is most likely a bad entry in one of these values that would have made the installation or uninstallation of software.

  • Satellite A200 - 19L: no sound after hibernation & CD/DVD drive does not work

    First of all, my laptop computer became very slow loading vista after formula 1 week to buy it.

    Second, sometimes when I put the mode 'sleep' a revival of the laptop, there is no sound and a red circle appears over the speaker icon in the bar of tasks, and when I go into control panel > Sound, he tells me that no. his drive was installed and when restarting the laptop the problem resolved?

    Thirdly, after the formula of the week 3 buy the computer also dvd - cd player has the same problem, like the sound and when you open my computer that NO cd\dvd drive icon and when I put a cd or dvd, it does not work or run and it happens all the time, even if the laptop restarts.

    Since then im able to watch movies or work.

    I'm lost and I don't know what to do!
    (Sorry for my bad English, but I hope you understand the problems)

    Hey Osama

    I think I can help you. The questions that appear on your laptop are not serious and the only one associated with software or registry.

    Regarding your noise problem:
    Please check this Microsoft document
    http://support.Microsoft.com/kb/929685/en-us
    or
    http://support.Microsoft.com/kb/937077/

    the MS update must be downloaded and installed ;)

    Regarding the missing CD/DVD drive;
    I think you should try to remove the drive from Device Manager and reboot the laptop. Then the operating system should recognize the STRANGE again.
    Secondly you should access the registry editor and should remove the upper filter and bring back the key filter
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Recommend checking out:
    http://support.Microsoft.com/kb/270008/en-us

    best regards and I hope that I can help you

  • DVD drive no longer works on the Satellite X 200

    Hello

    Although my laptop X 200-191 is just 3 weeks, this afternoon the DVD player suddenly stopped working. When I insert a dvd, the drive makes sounds like it will play the DVD, then stops and nothing more happens. When I click on the DVD drive in 'my computer' section, the Player opens and asks you a DVD... It will not play music cd's.

    I just installed a new (HD) driver for the DVD drive on the toshiba site, which should be compatible. I also tried to reinstall the previous driver, but the problem persists. I can't use the CD recovery either, for the reader DVD does not have to start the recovery cd...

    Can anyone help?

    Thanks in advance,

    Stoter13

    Hi mate,

    This looks like a serious hardware problem. Please visit the link below and contact the nearest authorized service partner in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT#

    I mean you still (and enough) warranty on this machine, just let it repair and everything should go after the repair...

    Welcome them

  • The Satellite A series CD/DVD drive no longer works

    I bought my computer Toshiba Satellite A of the series with Windows Vista installed. I removed Vista and installed windows XP on the computer.
    Now, the dvd player does not work properly. When burning the DVD it burns only 6 percent and then gives the following message is displayed: "unspecified error".

    I searched the internet for a solution, but the given solution does not work because the upper and lower filters must not be located in the file regedt32.exe.
    Is there anyone who can tell me what to do and how this problem can be solved?

    Regarding, Jens Oolders

    Hello

    I found the same information as the upper and lower values filter would have a bad influence on the use of CD/DVD drive.
    Many people have reported an improvement in performance after deleting the upper and lower filter of this registry key values;
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    To start the registration type please; RUN REGEDIT in the window.

    After this procedure, you must restart the laptop again.

    May I ask what burning program you use?
    I would recommend Nero. It supports several different additional functions such as 'Test Drive' or ' control the speed in the car.
    It all works to get performance better combustion.

    Perhaps, you use switch to Nero and test different DVD from different vendors!

  • My cd/dvd drive no longer works and is not rognized by my computer anymore. How can I reinstall?

    My cd/dvd driver is no longer recognized by Windows XP when I try to play a cd or movie, or try burning anything I get no response from the unit at all.  I tried a system restore but it did not work.  I see the instructions on the internet on how to uninstall and reinstall, but it seems that the device driver is just went and I don't know how to recover or reinstall.  I'm on a laptop HP Pavilion entertainment with Windws XP.  Any help would be appreciated.

    Thank you

    Hello
    1 - do you mean that the CD/DVD drive does not appear in Device Manager and windows Explorer?
    2 did you recent hardware or software changes to your computer before this problem?

    You can try the tool Fixit of the article below and check if that helps.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    You may be interested to have a look at the article below.
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
    http://support.Microsoft.com/kb/321641

  • Re: Dvd drive no longer works on my Equium A300D - 16 c

    Hi, I need help!

    My Equium A300D - 16 c ceased to recognize any kind of disc, I ve tried to double click on the drive but they hunted gey and the message "Please insert a disk into the drive" appears.

    After reading the posts previous back to a little not to seem too much like a dumb blonde and have checked so far the values of registry - which are not defined, uninstalled the drive via the device of system - nothing works. He was only about 2 months and cannot really be without it.

    Any help would be much appreciated

    Try to remove the drive from Device Manager, restart the computer and test it again.
    Have you tested with original DVD and music CD?

  • Satellite C660 - CD/DVD drive no longer works

    Hello

    For some reason any my cd/dvd burner will not blank discs write. It worked very well recently, but seems to have stopped. I tried to write data and a normal cd through Windows Media player, Nero essentials 9 (which has been pre loaded on the pc) and via a call from Burnaware free burning software. Who never I use goes through the procedure of Brown, checks and finalizes the disc and ejects it saying burn was successful, but when I relload the disc, it shows as empty.

    Any help would be gratfully received.

    TSSTcorp cddvdw ts l633c is the cd/dvd on the computer. I uninstalled and re installed but it had no effect. He reads the discs well.

    What blank media you tested?
    Have you tried using blank media from different manufacturers (product quality as TDK or Verbatim)?

  • CD/DVD drive does not work after 8 Win instalation

    Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

    When I put the blank cd and try to open it, it gives me error when opening by saying:
    "windows could not complete the format".

    Who's a software or a hardware problem?

    waiting for help!

    This means that your CD/DVD drive no longer works and is not recognized by the system?

    If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

    + Why my CD/DVD drive does not work after upgrade to Windows 8? +
    http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

    You must uninstall the programs from Toshiba:
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator

  • After the update of Windows CD/DVD drive does not work

    After windows automatically updated on my windows system 8, my CD/DVD drive no longer recognized discs. It will rotate when you close the disc drive as if he tried to recognize and initialize the disc, but then it will do nothing. When you go in my computer it doesn't even say that there is a hard drive available.

    In device manager has a yellow triangle with a '!' in the middle on the DVD/CD drive. When I click on drive properties and check the updates on the disk, it indicates that the drivers are up to date. Drive is MATSHITA DVD-RAM UJ8C0.
    Y at - it a fix for this problem? For some reason my system does not restore automatically save it before the update or the other so I can not on a point system. Help, please.

    Try to remove the GEARAspiWDM entry.

    To remove the GEARAspiWDM entry double-click UpperFilters and, under value data, delete GEARAspiWDM > OK

    Create a system restore point beforehand and restart the computer after.

    However, if you have an application that uses the GEARAspiWDM, like iTunes, just install the latest version of hardware drivers (4.020.5) and that no changes to the registry:

    http://www.GearSoftware.com/support/drivers.php

    Updated speed drivers should also correct the mistake.

Maybe you are looking for

  • Satellite A100: Toshiba Power Manager does not work

    Hello everyone!I just installed Vista on my laptop (originally I had Win xp on it)First I installed video drivers from toshiba.comThen I installed the bios update and additional package toshiba.But the toshiba Power Manager does not work!Vista uses o

  • Visible ReadyDLNA, but access is denied

    Hello I have a 1 TB external drive connected to my router. I can access the drive as a drive of the PC network via WiFi without any problem. - but I can't access the drive as a media server. Both options 'enable media server' and "enable TiVo support

  • Access denied to send or forward an email

    I get the following error and I am unable to write and send or forward e-mails. Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3

  • Question on HP recovery disks

    The thing is, im about to upgrade my motherboard and buy Windows 7 as my vista OEM license becomes zero, but on this upgrade, the parts that are remains a do a computer itself without a hard drive. Now the question is: if I do recovery HP discs will

  • I can link a WRT54G2 V1 to a Zyxel P-660HN51 and it will give me better wireless then?

    Hello We received a new modem/router to our ISP. It's the Zyxel P-660HN51 and I wanted to know if my WRT54G2 V1 router connection, would be better for home wireless? Expand it wireless? I think I can, but have no idea how to. I'm pretty good with com