After BIOS update easy media are turned on all the time

Similar Questions

• M35 satellite turns off all the time

  My Satellite M35 turns off all the time.
  Trigger, then it dies.

  Advice please

  Seems to be a problem of overheating!
  Usually, this happens because the cooling modules cannot turn with maximum performance and cannot cool the internal devices properly!

  Why is this happening? Well, the reason is the dust and debris that prevent the fans work properly!
  I recommend cleaning with compressed air stream fans that can be purchased in most computer resellers!

  Good bye

• CS5: all workspaces are greyed out all the time.

  CS5: all workspaces are greyed out all the time. Even the default value - at a loss about this, please.

  Workspaces are not editable in CS5 in the view full screen w/menu. Go to the Standard screen view to change workspaces.

• Automatic Updates turned off all the time XP

  Updates automatic turn off XP SP3 its own WARNING all the time constantly security - I have Kaspersky internet security 2012 worm 12.0.0.374, 8 GB of Ram. Intel CPU machine compatible PC.

  I saw the other posts on this - doesn't seem to be one definitive solution other than to search for malware.

  Is there any software/malware known that this may be because of this?

  Hello

  I am happy to know that the problem has been resolved and that I could be useful.  If you have any questions on Windows then post in this forum.

  It will be useful.

• Satellite A300D - Turn off all the time

  My wife has a Satellite A300D (model PSAK4E) and it keeps closing. The two randomy and when induced under certain conditions

  Previously, I tested the HARD drive and found bad sectors then replaced with a 64 GB SSD. I tried to install Windows 7 but it kept fault towards the end. So I reset the machine without a battery and now the power button for 2 minutes to clear the memory. Installed Windows 7 + updates.

  I was worried about stopping all the time but flashed the BIOS. Flash worked.

  Laptop resets always? I have reviewed several possible causes and wanted to get other peoples ideas
  1 HARD drive - replaced and even resets
  2. battery - ran on power sector only and even resets
  3 overheating - sometimes under certain conditions (memmory tests or you try to run certain applications) or randomly (without reason)
  4. a broken circuit somewhere on the motherboard
  5 - completely new OS + software resets the laptop when using some applications from a live disk.

  Thank you inadance for the help

  Hi me_in_oz,

  Theoretically the laptop turn off itself due to a higher internal temperature to protect the equipment against damage.
  In this case, you will need to clean the laptop using jet of compressed air to blow the dust from the cooling fans. It is easy and takes only a few minutes to check out this article:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Otherwise it seems to be a serious hardware problem and your laptop should be checked for professional people. Probably it s a malfunction of the motherboard

• Bug in version 6.2.1 of the filter? (flag to reset filters turned off all the time)

  I love working with the filter with indicator / without indicator with my photos.
  With the 6.2.1 last version, with indicator filter go back "filter off" all the time.
  Example, 3 pictures are marked, I select, I merge them into an HDR... .and when you finish the filter is reset to filters turned off.
  Also edit a photo in Photoshop... .returning to lightroom... .filters off

  Quite boring!

  also ask, if you merge 3 pictures that are flagged (picked) in an HDR, it would be nice that the merged result is marked as?

  I think that you have unlocked filters.  Make sure this file > library Filters > Lock filters is verified (the lock is also represented by the padlock on the right end of the library filter bar - make sure that it is locked).  When it is locked, the current filter is not changed by Photo > merge pictures (at least in my 2015.2.1 CC).

• Firefox sometimes freezes my computer when I go to some sites for about 10 seconds and my hard drive is turned on all the time.

  This happened since I upgraded Firefox 3.6 Firefox 18 when it was released in the 23.0.1 that I have right now. When I go on some heavy such as yahoo news, browser specific websites and my computer will be blocked for about 10 seconds while my HDD is on all the time and the only info on: crashes gives me a link to a page called limitation, which apparently no longer exists. It happens that its manual or automatic cache on size and only seems to happen when its max cache. Depending on the subject: crashes, it happened only 4 times before I went from 3.6 to 18.

  Ive tried turning almost all my addons turned off and that did not work, Ive had harware acceleration turned off for a long time if it's not that. I still have all my plugins off except flash and it does not have anything to do with flash. The report of health of firefox it also count as an accident.

  I worked in fact observe that its almost always the comment system on the pages of Web sites such as disqus. IM blocking them just through them with ghostery and anti-ad element hider.

• Satellite Pro 6000 turns off all the time

  Hello..

  I bought a 2nd hand Saturday pro 6000. And now it has started to cut, but it turns on when I press and hold down on the actual case, and when I let him go, he just died... He starts to get on my nervs now I even cleaned up the dust, and he does not know. And there is an orange led flashes all the time everyone knows what is happening or what I can do?

  Thank you will be

  Already seen on the Pro 6100...

  You can read more here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18934

  Concerning
  chain

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• FF update v50, now Shockwave Flash stops all the time

  Get the good old message SF busy or... etc SF is 23.0.0.207 updated November 8, 2016 worked fine before the update of FF Hit continue FF locks Hit stop SF and then FF works but no video will play and busy status message SF can reappear randomly on sites of then. If no fix is possible to come back to FF version?

  Laptop rebooted cold rather than just restart FireFox. Seems to work OK now (touch wood!)

• How to place my target type? Media Player Windows open all the time. ?

  I work in the window Vista Home Premium and two or three days for an unknown reason all (at least most) program I try to open, to be opened by Windows Media Player. Example, I tried to open Google Chrome or Skype or any application, but it cannot open. Instead, Windows Media PLayer will open with a statement indicating the support of windows media player cant the file. I looked under the Properties tab of the target still ends in .exe, but for some reason any TYPE TARGET indicates Windows Media Player. So I guess I'm asking how to change the default target for the appropriate program type? I tried to change the path by right-clicking on it, but there is no option for 'openwith '. It was just turn off. Help, please.
  
  

  Use this tutorial: unknown the .exe file associations in Windows Vista
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Excerpt:

  Difficulty of recording
  To resolve this problem, you must delete the UserChoice key above using a script or REG file. Downloadexefix_cu.reg attached at the end of this article and save it on the desktop. Right click on the REG file and choose Merge.

  Do scroll to the position of the spare part and download the exefix_cu.reg for the benefit of other people looking for answers, please mark as answer suggestion if it solves your problem.

• Removing event listeners - are they need all the time

  My goal is to increase the performance of my project, so I would like to know if it's always a good idea to remove event listeners. Specifically, let's say I have a movie with several scenes and several frames in these scenes. Each image has an event listener:

  Example:

  Scene 1

  Image 1 (EventListener)

  Frame 2 (EventListener)

  Frame 3 (EventListener)

  Framework 4 (EventListener)

  Scene 2

  Image 1 (EventListener)

  Frame 2 (EventListener)

  Frame 3 (EventListener)

  Framework 4 (EventListener)

  Questions:

  1. Flash continues to listen to an event in the scene 1/frame 1 when the playhead on stage 1 / 2 frame?
  2. Or Flash just listening events when the playhead is in a particular frame only?
  3. Should I remove the event listener once I leave a specific frame (should there be event listeners remove on each image)?

  You must remove event if listeners is no longer necessary.

  scenes do not yet exist in your published swf file.  they exist only in the ide to help you organize your project, but the more advanced flash users avoid using scenes because they do nothing useful, once you get a deeper understanding of flash.

  so, it makes no difference what the read head scene is because the flash player doesn't know which scene is that.  those who are righteous (marked) frames on scenario main and each scene begins with a keyframe void (unless and until you put something in that keyframe).

• Desires of Windows Update restarts all the time to complete updates

  Update Windows (W7) asks to reboot all the time. I am up to date with all updates. There are usually deferred until 4 am, but sometimes not, and is called a reboot scheduled for 10 minutes. How can this be stopped? I tried to go back to a restore point, and then update again.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Before you try to install manually the updating of double control and make sure that the windows update service does not work after restarting

  If so, stop the service and at least switch to manual.

  If it is to stop the service and apply

  

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)