After changing the partitions may not start Vista

Similar Questions

• Windows does not start after changing the partition with external software

  Hello

  I messed up and followed some bad advice.  Water under the bridge, but I want to recover my bootcamp partition if possible.  I've seen several messages with the right process, but decided to post hear instead of assumptions.  I am running OS X El Capitan on an early 2011 MacBook Pro.  My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing.  I have 10 Windows on the bootcamp partition.

  I'm going to throw a bunch of data from my survey here.

  Capella: ~ list of the ronh$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.7 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 190,2 disk1

  Logical volume on disk0s2

  B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  Unencrypted

  Capella: ~ list of cs ronh$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 190546800640 B (190.5 GB)

  Free space: 19005440 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 190546800640 B (190.5 GB)

  |

  + -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 190175473664 B (190.2 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 488397167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  373840896 1024

  373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  335 488396800

  488397135 32 table dry GPT

  488397167 1 dry GPT header

  of gdisk.

  Command (? for help): p

  Disk/dev/rdisk0: 488397168 sectors, GiB 232.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 488397134

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 1365 sectors (682,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 372571359 177.5 giB AF05 Macintosh HD

  3 372571360 373840895 619.9 MiB AB00 Recovery HD

  5 373841920 488396799 54.6 giB 0700 BOOTCAMP

  

  It is worth spending time to recover?  Thank you.

  Ron

  1. can you describe the problem and the steps you took to get here?

  2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.

• Re: Satelite C850-B516: copy data drive HARD recovery after changing the partitions

  Hello

  Forum need help once again

  I split single partition came with my laptop to have data in a separate partition. I wasn't aware that it will affect. I have not created any backup CD. No, when I run HARD drive recovery media creator I get error "NO HDD Recovery Area.

  I can see a healthy partition of 10 GB on my drive and disk partitioning tools are evidence of the data in it.

  I copied to the Active primary partition of USB. But when I boot from USB, he leaves everything recover.

  It comes

  Can I recover my system to factory default using the recovery data copied?

  Concerning
  Ahmed

  Toshiba Satelite C850-B516

  # Problem, it is that your recovery image is useless now. When you want to use the external device for installation of recovery image is must be created as device start and it can be done if you use the preinstalled recovery media creator.

  Recovery image is saved on the HARD drive and fixed with the so-called markers. Recovery media creator can find these markers and start using the recovery saved on the HARD disk image. After changing structure of HARD disk partitions these markers disappeared and this is the reason why you see this error message.

  I'm afraid you must order now new recovery m FRO Toshiba drive and you can do it on - https://backupmedia.toshiba.eu/landing.aspx

• Image of Bishop Bootmngr is corrupted, the system may not start

  the lap top was windows xp Media Center Edition

  Model - hp pavilion dv 5040 we

  Hey Charlie,

  There are a few reasons for this message error. It is possible that the hard drive has failed. I would first start by run the self test on the hard drive rack. Since it is a drive error, it would be the best place to start. Follow the steps here on how to run a HDD test

  Let me know what it returns.

  Thank you
  Sean

• No boot device after changing the partitions

  Hi all. I've lost the ability to start in my Windows partition through bootcamp. When I use startup disk system prefs. OSX, he can see Bootcamp, but rebooting produces an error message "no boot device." If I hold the alt key while rebooting, I can only see the Macintosh HD, without bootcamp (or recovery, by the way). I can see the Bootcamp drive on the desktop, so I can use Parallels to run Windows based on this drive, I know that the drive itself is ok.

  I did a fair bit of mucking partitions. I decreased my Macintosh HD partition and inserted a new Macintosh HD and Bootcamp. Then, things are funky, and I created a volume of CoreStorage on top of Macintosh HD and it is associated with a partition on an SD card (created a fusion DIY with a TarDiskreader). All this worked fine and I now had a huge hard drive Macintosh and boots fine Mac, Parallels works fine, but I can't start natively in Bootcamp.

  Can someone help, please?

  Here is the output of "distill the list:

  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            279.8 GB   disk0s2
     3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
     4:                  Apple_HFS Untitled                20.5 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                199.4 GB   disk0s5
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *255.9 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:                  Apple_HFS TarDiskFirst            309.0 MB   disk1s2
     3:          Apple_CoreStorage Macintosh HD            199.8 GB   disk1s3
     4:                 Apple_Boot Boot OS X               134.2 MB   disk1s4
     5:                  Apple_HFS WinData                 55.2 GB    disk1s5
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +479.0 GB   disk2
                                   Logical Volume on disk0s2, disk1s3
                                   663FCC6B-F913-4137-B61C-9A318FF32328
                                   Unencrypted
  

  And 'sudo disk/dev/disk0:

  GPT fdisk (gdisk) version 1.0.1
  
  Warning: Devices opened with shared lock will not have their
  partition table automatically reloaded!
  NOTE: Write test failed with error number 1. It will be impossible to save
  changes to this disk's partition table!
  You may need to deactivate System Integrity Protection to use this program. See
  https://www.quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
  for more information.
  
  Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
  
  Found valid GPT with protective MBR; using GPT.
  
  Command (? for help): p
  Disk /dev/disk0: 977105060 sectors, 465.9 GiB
  Logical sector size: 512 bytes
  Disk identifier (GUID): 918541C4-E232-154C-BC98-413BDA1DBBCC
  Partition table holds up to 128 entries
  First usable sector is 34, last usable sector is 977105026
  Partitions will be aligned on 8-sector boundaries
  Total free space is 262288 sectors (128.1 MiB)
  
  Number  Start (sector)    End (sector)  Size       Code  Name
     1              40          409639   200.0 MiB   EF00  EFI System Partition
     2          409640       546975591   260.6 GiB   AF05  Macintosh HD
     3       546975592       547237735   128.0 MiB   AB00  Booter
     4       547237736       587356159   19.1 GiB    AF00  Untitled
     5       587618304       977104888   185.7 GiB   0700
  

• X 1 carbon (Gen3 20BS) may not start, nothing else than to the BIOS

  Yesterday I had a few pilots, as well as the update of the BIOS updates. BIOS seems to update successful (now its 1,14), all under BIOS works. I had 2 OS: win10 and Ubuntu with grub. I've been a happy user of all these for several months, but...

  The problem is that I can't start any OS or OS installation even after an update of pilot (which was done through Lenovo utility for Win10)! Recovery ISOs, diagnostic tools... Nothing can be started. BTW, I know how to deal with secure boot and legacy mode. I can handle start the process of starting anything listed above, but they all have the same behavior. That they freeze at the beginning. Everything that involves just ACPI hangs at startup. Linux crashes after the message "ACPI Tables successfully asked" or sth like that. Win10 displays the points that go around 1 second and then crashes. If I add "acpi = off" to Linux boot options, it starts (but almost nothing works there without acpi support). Things that do not work for ACPI. For example, I can update the BIOS of drinks ISOS. It still does not help because my BIOS version is the most recent and it does not restore.

  It cannot be the hardware problem such as it appeared after Windows drivers updated and flashed a firmware (not BIOS, but I don't know what it was exactly). I can access the data on the SSD and you can see some newspapers if necessary.

  Hope of assistance how Flash again all the firmware on laptop boot USB possible? What can be flashed with the exception of the BIOS?

  In response to customer relationships which, after a BIOS update to some ThinkPads, the system may not start, suspended at the Windows startup screen, Lenovo provided a Service COUNCIL detailing workaround. A permanent solution is provided through future BIOS update.

  The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-t0079

  Thank you

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• XP pro do not start after changing the Boot.ini file

  The problem is that my C: partition Windows 7
  D: has XP Pro

  These should be considered right resp. partitions 1 and 2?

  I wanted to first XP pro to start the default partition.

  A few days ago, I made a change to the boot.ini file. But since XP Pro was not starting at all.

  I tried XP Pro to start first that the default partition.

  Given that XP Pro and my D: drive have not been starting, I consulted the boot.ini file in C:, Windows 7 partition and I changed the order (i.e. partition No.) in the boot.ini file and saved it to the required location, i.e. D:/WINDOWS/pss.
  through my drive C: of work, i.e. the partition of Windows 7, but it still does not work because apparently even though I save here, the actual values and the paths of the partition are not actually be changed on the system. I confirmed this by going into the CMD shell switching to D: and by running the command D: > bootcfg.
  Apparently any values I save in the boot.ini file that I save as a text file or "All files" in D:/WINDOWS/pss/it does not actually change in the system because whenever I run the command bootfg values are remaining still and not able to be changed, because apparently it is not saved in XP Pro and the D : partition. No matter what I do and what I put in the boot.ini file to access the values through the windows 7 partition, the values that bootcfg returns me are always the same and he refuses to change the name of path or anything else. No matter what orders, I also put in bootcfg himself.

  These are the values that bootcfg gives me:
  default: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  Boot entries:
  Boot entry ID: 1
  Friendly name of operating system: MS Windows XP Professional
  Path: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  The operating system load options: / noexecute = OPTIN/FASTDETECT/usepmtimer

  My XP Pro partition is simply not booting, and it of my main partition and has all my work. It is imperative that it starts.

  My Windows CD is also not start because apparently my DVD drive does not work properly, I had the anti malware threatfire (ThreatFire) installed on my XP D:Windows program disk but have uninstalled just in case it was blocking my changes to the system.

  On C:Win7, I put the default operating system option in the Advanced tab for Win7 and the D:XP Pro to XP Pro, when he was the starter and work. Now I can only access my files D:XP Pro Player C:Win7. But XP is not just start. What shd - I do? Thks.

  I don't have a very practical windows CD but my CD/DVD drive is not read and does not properly.

  Looks like your original post stated that your cd/dvd does not work.

  Respectfully, you will continue these hap hazard patches and your computer will not start at all. I'll try to help you once again. Please follow closely.

  Start your computer by loading Windows 7. Click HERE and download EasyBCD. Install the software in trial version. Once installation is complete open EasyBCD. You will see an interface like the image below. Click Add a new entry.

  

  A new screen appears as in the image below. Use the drop down menu to select Windows NT / 2 k/XP / 2 k 3 as described below. Type the name of the operating system in the box below. Of course, it will be Windows Xp (you can add the home or Pro to the name if you want). Make sure now that there is a check mark in the box "automatically detect the correct player. Once you have completed these steps click on 'add an entry '. That's all! You are finished. If all goes well, and if you have followed these steps carefully, there, now you have a system dual boot.

  

  You can now start working on your cd/dvd problem.

• OptiPlex 755 USFF does not start after changing the cmos battery

  I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.

  I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.

  Any help would be appreciated.

  After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you