After changing the POP IMAP, can I copy POP IMAP Inbox inbox?

Used POP for years3, Windows 7, GMAIL. Converted to IMAP excellent instructions.
The server of GMAIL inbox has still some 10K posts I have long since deleted
on my local computer. The POP Inbox reflects the State I want to use.

Is it possible to copy the POP Inbox in the IMAP account, overwhelming the IMAP account
Inbox? I know not where to find the profile.

Thank you very much for your answers. Seems reasonable. Will try today.

Tags: Thunderbird

Similar Questions

  • Reactivation after changing the HARD drive (can't use the phone)

    I hope someone can help. My HARD drive failed completely, and I adapted a new. I re iunstalled the Vista operating system which

    I bought 3 or 4 years ago and it activated OK online. I now get an error message asking me to buy a new key.

    as long as one I presented is attributed to another computer. I'm unable to use the phone as I am deaf so how

    can I handle this? Best wishes to you all, RegT

    Hello

    "Is already in use" error message in the activation, or similar, sometimes after a reinstallation on another hard drive, etc...

    Can you get help from a friend or relation to the activation of phone for you on your computer?

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place images and text where

    LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place the images and the text I would like.  I tried moving them to the bottom, but does not work.  Is there a way to encapsulate the images so that they can be places as much as I want?

    Select your photo and text inside the subform flowed. Right-click and select wrap in subform do the positioned Subform subform. This will allow you to move objects in this subform positioned the way you like them.

  • After changing the administrator password in windows server 2003, I can not connect the next day why?

    After changing the password in windows server 2003, when the new password take effect?

    Hello

    In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the information is useful.

  • How can I reactivate Windows 7 32-bit after changing the motherboard free of charge?

    I need to reactivate it. Need something good advise. change the motherboard and can not activate. I don't have a $199.00 to buy a number.

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    If this is an OEM of Windows 7 version that came with your previous motherboard, you cannot transfer it to a new motherboard.

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :
    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:
    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  • HARD does not work after changing the disk partitions recovery media creator

    Hello world

    After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

    Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
    I got in the OEM recovery partition.
    I am also able to create a recovery using the Windows tool unit.
    You have no idea about it?

    Thank you very much!

    Hello

    Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

    Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

    Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

    I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

    If you have any other questions you are welcome.

  • After downloading the updates, I can't reboot my pc, so now I can't receive updates.

    After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

    Hi stevenstar,.

    a. you just download the updates of Windows or you have installed them as well?

    1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
    Once the computer restarts view the Windows update history and check if updates are installed.
    See the Windows updates are installed
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
     
     
    2 type eventvwr.msc/s in the address bar.

    The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
     
    For more information on event viewer, see the articles below:
    Open event viewer
    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
    What are the information contained in the logs of the event (Event Viewer)?
    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
     
     
    We hope to hear from you soon.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Photosmart 6520: 6520 Photosmart printer stopped printing black after changing the print cartridge

    There was a similar position two years ago. After changing the cartiridge (564XL) black printing, the printer will not copy documents. He behaves as if I placed a blank sheet of paper on the glass. I can scan the document and print the .jpeg, but not the document. The print quality of everything else is mediocre - very light on blacks, even though the colors are fine. I ran through all the diagnostic tests and he told me that the printer is fine, although the black box on the diagnostic page is empty. The difference between my printer and the one in the previous post, it's mine is 18 months and longer warranty. It has been little used. In the previous post, none of the solutions have been proposed, but apparently HP has replaced the printer. Any suggestions, or is this device intended for scrap?

    Try youtube videos here.

    https://www.YouTube.com/results?search_query=Photosmart+6520+print+head

    Looking to learn more.  If no joy, your printer is toast.

  • After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

    After downloading the programs I can't install them

    Hello

    1. which site Web you downloaded the program from?
    2. you use a download manager to download the program?
    3. what web browser do you use?
    4. don't you make changes on the computer before the show?
    5. were you able to install other programs on the computer?
    6. what program are you trying to install?


    Method 1:
    You can try the steps in the article of the supplied knowledge base and check.
    How to solve problems when you install or uninstall programs on a Windows computer
    http://support.Microsoft.com/kb/2438651

    Method 2:
    You can also perform a clean boot, and then try to install the program and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

    Method 3:
    You can run Microsoft Safety Scanner in Mode safe mode with network and check.
    Check out the link:
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

    You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    WARNING:
    If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
  • error printhead after changing the printhead in L7680

    I have an OfficeJet Pro L7680 that is a few years old.  Recently, I have noticed a decline in the print quality for mainly black, but also a little yellow, and after changing the black cartridge with no changes, I decided to change the Black/Yellow Printhead.  So, I thought that if I'm trying to change a print head, I should change the other (cyan/magenta).  I bought new Office Depot print heads.  After replacing the print heads that I was able to print a page or two, and then all of a sudden the printer started saying there is a problem with the cyan/magenta printhead.  I tried to remove and reinstall, the suppression and power reset and then put it back up, etc, but nothing moves it.  I have not yet called HP, but I hope that when I do they will help because the print heads are under warranty until 2014, even if the printer is out of warranty.  In the meantime, I thought I would ask here is - it possible I only have a print head of DOA?  Or would it be the printer?  Unfortunately I threw the old printheads immediately (stupid me) so I can't try that goes back to the old magent/cyan print head and see what happens.

    Hello jmmarton.

    Your chip printheads were damaged by inserting wrong while the transport is always on the right side. This document provides instructions on how to replace the printhead to the unit.

    Use the link below to find how to contact HP phone support in your country.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    See you soon!

  • HP laserjet p1006: does not print after changing the toner

    I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

    Hi @cindycb,

    Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Make sure all the orange, packaging material is to remove the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    Open and close the cover five times quickly. It should print a page with black lines on it.

    You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

    You use Genuine HP Toner?

    Please let me know the result and if there is anything else I can help you. Thank you.

  • HP2840 which has just started to squeek terribly after changing the drum.

    Can anyone help to maintain the HP2840 all in one color laserjet

    The squeeking started after changing the second image drum

    thketer,

    Self-satisfied, you got what it takes .

    Good luck!

  • Speakers stopped working after changing the device sound card

    * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

    I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

    Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

    My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

    It is a question of another driver, or is it something else?

    Any help would be greatly appreciated.

    Are plug you the speakers into the modem?

    They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
    Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
    See you soon,.
    Jerry
  • Internet connection is slow after changing the MAC address

    * Original title: win7... problems with internet after changing the WIRELESS card MAC address

    I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

    Hello

    1. what made you want to change the MAC address?

    2. what exactly happens while you are trying to connect to the internet?

    3. you receive an error code or error message? If Yes, what is the full error message?

    4 have you checked the issue in internet explore as well?

    Please follow the steps below and we update with the results.

    Method 1: Run the network troubleshooter, and check.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Please try following the steps provided in the article and check out them.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    For more information, see the articles and check out them.

    10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

     

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Let us know if it helps!

  • After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

    Hello

    I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

    In short, what I'm trying to do now is changing the default port of 1521 to 1525.

    So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

    Listener.ora

    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

    # Generated by Oracle configuration tools.

    LISTENER =

    (DESCRIPTION_LIST =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

    )

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

    )

    )

    ADR_BASE_LISTENER = / u01/app/oracle

    tnsnames.ora

    tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

    # Generated by Oracle configuration tools.

    BI =

    (DESCRIPTION =

    (ADDRESS_LIST =

    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

    )

    (CONNECT_DATA =

    (SERVER = DEDICATED)

    (SERVICE_NAME = bi)

    )

    )

    And then changed the local_listener:

    SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

    SQL > ALTER the REGISTRY SYSTEM;

    Finally, I started the listener (lsnrctl start) again.

    Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

    The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

    So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

    It seems that the port used by the OEM is always 1521.

    What should I do? Can someone help me solve the problem?

    Thanks in advance.

    UPDATE:

    After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

    So what I'm doing is decreasing the config:

    $ emca - deconfig dbcontrol db-rest drop

    and then create again:

    $ emca - create config dbcontrol db-rest

    Voila.

    Best regards

    Jerry Antonius

    Hello

    Try to change the port numbers in the following files

    Don't port no 1521 to 1525

    $ORACLE_HOME /_SID/sysman/config/emoms.properties

    oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

    $ORACLE_HOME /_SID/sysman/emd/targets.xml

    (Before 1521)

    (Before 1521)

Maybe you are looking for

  • When I compose new emails, font sizes continue to increase.

    My email has been hacked or otherwise tampered with, a few weeks ago. I changed the password of my Yahoo email address; This action appeared to solve the problem. However, I have now the problem of police-size-increase when sending new emails. This p

  • Use: How to read a single line of names of channel or units?

    Most of the examples of programming to use use channel names in separate lines, as in the following example: ChannelName: timeType: time ChannelName: XShiftType: R64 ChannelName: YShiftType: R64 Most of my data sets have channel names and / or units

  • Compatibility XP with DellV525w

    Previously, I was using a laptop with my DellV525w to analyze the files, but I have more access to this notebook so I hooked my gateway Compaq Presario 531OUS - Microsoft Professional Version 2002, Intell (R) Celeron (TM) UC - 1200 MHZ - 1, 20 GHz, 3

  • HP 3050 has All in One series J11: no scanner detected

    Have had this printer for several years - different laptops.  Always have had a problem.  Now it says "no scanner detected."  Not original discs have to reload.  Can you please help.  Just trying to scan on the printer not from the computer.   Printe

  • I get a (disk hard boot sector read on only 1 of my 4 accounts user Please help)

    My computer has started to make a message on only 1 of the 4 user accounts and do anything, you're trying to do on this user account is frozen on the screen and is absoluttely nothing and now problems with the performance in other areas of our comput