After dismantling Satellite A60 cannot detect the CD/DVD drive

Similar Questions

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?

• Cannot get the cd/dvd driver for CD playback

  Hiya

  Earlier this year, my laptop has been infected by viruses, malware, etc. I used the program Spyware Doctor to remove any infections, but so many files and programs are removed.

  On the Device Manager CD-ROM/DVD-ROM driver TSSTcorp DVD +-RW TS - L632H ATA Device ended up having a typical yellow mark next to it and the cd player would not read cds or dvds. Somehow however his custom 'fixed' itself, but always play all discs.

  Light to the factory side, it opens and closes, and when a cd is put in it sounds as if its going to do something, but after a few seconds only stops and don't open the program or recognize the drive. I read through many responses of forum and things like delete upper and lower filters do not work as they are already not.

  Advice or answers will be very appreciated!

  Hi sugar_owl,

  1. run the troubleshooter from the link, below, you can see the link below:

  Hardware devices do not work or are not detected in Windows:http://support.microsoft.com/gp/hardware_device_problems

  2. If this does not help, you can uninstall and reinstall the CD/DVD drive:

  To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note that if control panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7 cannot recognize the CD/DVD drive, no help support "assistant".

  Subject says it all.  Since I got this machine, it had problems when the CD/DVD drive becomes invisible and are not accessible by any means.  A reboot has solved in the past, but now, it doesn't seem to work more.  I would like to reinstall the drivers, but guess what, I don't know what kind of player, it is (funny how that works), and Support 'Assistant' is apparently ihcapable to understand the model of this Pavilion dv7 ("product name: loading...") ("now until the heat death of the universe), which does not help either.  Anyone has a better idea than just blindly install the drivers?

  Hello

  Drivers for CD/DVD drives comes with Windows (IE with the operating system - it is not the drivers you need to download).  The driver is located in C:\Windows\system32\DRIVERS\cdrom.sys.

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive does not, in the Start Menu, open Control Panel and click Device Manager.  Click to open the IDE ATA/ATAPI controllers.  Right-click on the first channel and select uninstall.  Do not delete if requested drivers.  When uninstalled repeat the process for each channel.  Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives.  Make a right click the drive (if it shows!) and choose uninstall.  Do not delete if requested drivers.

  Restart the computer and let Windows reinstall devices.  Check the disc again.

  If it still does not work, re-run the fixit automated Microsoft at the link below.

  Windows 7

  Vista

  Then, in the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Best wishes

  DP - K

• Help! Inspiron 1525 cannot find the CD/DVD drive

  My new Inspiron 1525 running Vista Home Pro can't find the CD/DVD drive. I tried reinstalling the driver, but it does not recognize the device to install on!

  I have installed a DVB - T TV antenna just before that the problem occurred. So far, the drive has worked perfectly.

  Any ideas? I am in Germany and I support here is until 18:00 and the U.S. support will not help me!

  Thank you

  Ruth

  
  

• Satellite 1700: Windows cannot detect the CD Rom drive

  CD drive on my laptop Satellite 1700 working under Windows. Windows cannot detect, but it works very well in mode cd player.

  Hello

  I have a question.
  Your drive is missing from the 'My computer' zone or the Device Manager displays a disk error?

  If the drive can be recognized in the BIOS, so I guess that the entries in the Windows registry are damaged or not right.
  I found this Microsoft Knowledge base and I think he should solve your problem.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please check and after if it succeeded.

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

• Satellite M200 - cannot install the WiFi XP driver

  Hello

  I recently acquired a Satellite M200 (PSMC0A-02G00M) a friend off the coast and decided this downgrade to XP. This model also has bluetooth. All the drivers work well, with the exception of a Wi - Fi connection - I install bluetooth, which works quite well. When I flick the Wi - Fi switch, this also seems to turn on Bluetooth power.

  Windows XP does not detect the integrated Wi - Fi. If you have any ideas, it would be much appreciated.

  Thanks in advance,

  Sam

  Hi sam.mul,

  I think that you need to install the WLAN driver before you can use the internal WIFI card. Have you already installed it?

  You can download it on the Toshiba site. After that, it should be possible to use the WLAN card.

  Check this box!

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• Satellite A300 - cannot read the second HARD drive

  Greetings from the Spain,

  I got 1 month there is a serious problem with my laptop (which is 5 months old), associated with crcdisk.sys.

  I gave up after several hours studying, and send the computer serving techniques. (Vista was does not load and no recovery was possible)
  Technical services changed 1 hard drive and the motherboard (don't ask me why)
  This computer cams with 2 HD (these 2 devices)

  The first has a recovery partition.
  The problem now is that I see the second HD (D :) but I can't read or access it.)
  However, McAfee, it can scan and I can see the names of files (they were there before sending it to T.Service) during the scan.

  The only solution I have Toshiba is "send it back", but with the previous experience I've had with this guy, maybe now they put a new keyboard and wait another month...

  Any ideas?

  Thank you

  _Update_

  Now I can read the second disc of Internet expolrer..., i.e. D:\documents... I read a few videos, I got there and seems to work.
  However, I cannot read with ordinary windows Explorer or cannot write files from any program.

  BTW. I can access from the Explorer, but just the files, i.e. d:\documents\letters, but not to the root?

  You have installed the laptop with the recovery disk? Try this!

  What operating system do you use? If you are using Vista control this information from Toshiba:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

• Cannot detect the external hard drive.

  Original title: USB to ATA/ATAPI bridge, cannot access hard drive

  I have a lenovo g570, its brand new, I have because I broke my old laptop but managed to recover my hard drive from my old laptop.

  I bought all the necessary equiptment to open it, I have different devices to connect my hard drive to that allows me to connect to any laptop.
  However everytime that I plug in my new laptop I get the USB to the ata /atapi view of bridge and can't access my hard drive. its really annoying me now. Ive tried all the links and updates that have been previously mentioned on many forums and still nothing works. Ive did go into the Device Manager... still no luck. It indicates that the device is functioning properly. I don't know what to do. some help would be great.

  Hello

  1. What is the brand and model of the external hard drive?

  2. what exactly happens when you access the hard drive?

  3. you receive an error message?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to connect the hard drive to a different USB port or try to connect the hard drive in another computer and check that the problem persists

  Method 2: Try to download and run the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also check if it is detected in disk management.

  a. click Start.
  b. Type diskmgmt.msc in the search box of start and press to enter.

  c. check if the external drive is detected.

  Hope this information is useful.

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• Satellite L300 can not detect the CD/DVD drive

  Hi all!!

  I hope someone can help! My laptop can't find my CD/DVD-rom device.
  I haven't done anything with it, have not installed all the software and Device Manger shows:
  The device cannot be charged - when I want to update the driver - check systems and the driver is the most recent?

  When I de - activate and it the system will find the same driver. But no CD DVD device.
  TSST corp CDDVDW TS-L633A

  What can I do to get access to this new?
  Thank you!

  Hello

  What operating system do you use?
  What is the status of the optical disc drive in Device Manager?
  I assume that the drive is not displayed in windows Explorer. Can you confirm this?

• 5205 - s503 satellite can not find the CD/DVD drive (code 41)

  Toshiba Satellite 5205-s503

  I can no longer use my dvd/CD drive (Teac DW - 22 4 E) Player. The device manager says that the device is loaded but it cannot find the hardware device (Code 41)
  I went out and bought an engraver of dvd/cd external usb 2.0 and again the same problem. The unit is responsible but material cannot be found.

  Advice please? I've provided with my laptop startup disk. I tried a system restore with no luck.

  This might solve your problem:

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart your laptop.