After doing a clean install of XP Pro, I can't update Service Pack or Internet Explorer

Similar Questions

• Problems after doing a clean install of Vista Home Premium and service pack 2

  I see that others have the same problem as me, but there is no way to comment (that I can see) on the thread I've read.  After a lot of problems, I did a clean install of VISTA Home Premium (came with my Dell PC) and when I installed service pk2, all of the same problems that led me to do a clean install appeared.  I can't the computer to recognize and install the keyboard and the mouse of the blue tooth. (Don't tell me to contact the manufacturer, because they came w / the computer and say "Dell" on them!)  He told me that the enumerator does not work.  Then I launched Quicken, and when I tried to save a registry check for print, he gave me the msg "Quicken launcher has stopped working".  He was a key reason I did a clean install.  The only improvement is that I can at least open Quicken, which he would not let me do before.  How to uninstall service pack 2?

  http://support.Microsoft.com/kb/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion G6-1d21dx: necessary drivers after Windows 10 clean install on g6 (g6-1d21dx Pavilion) Pavilion

  I tried the HP support site, but I don't see any drivers for any available OS for my model, the g6-1d21dx Pavilion.

  I did a clean install of Windows 10, but the Wi - Fi button does not work. Apparently, there's a pilot called HP wireless button that I need to install. When I do a Google search for it, there is a link to HP's download page, but the link seems to be dead.

  HP allows us to download drivers more? It's frustrating, because drivers must be simple and easy.

  Can someone please tell me where I can get this and all the other drivers that I might need after doing a clean install of Windows 10?

  Thank you.

  Well, I think I solved the problem. The first time I did a new install of Windows 10, didn't have an Ethernet cable connected to the computer. This leads to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. I reformatted the SSD drive and cloned my old hard drive, but that resulted in a very slow performance, then I would get errors every other time I start the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). In addition, the hard drive that I cloned has been running the 64 bit version of Windows 10, and I wanted to try the 32-bit version, because I want to use some software of old who will not run on 64-bit Windows 10 (for example, the Spanish dictionary Oxford SuperLex 3-in-1, French and German).

  Last night, I did another installation of the 32-bit version, but with a network attached cable. This time, after installation and update of Windows, all my devices appear to be installed and working properly. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. In addition, installation completed MUCH more quickly with the connected network cable.

  Conclusion: If you clean - install Windows 10, I highly recommend that you do so with a network cable attached so that you will have access to the Internet when it is necessary during installation. With fixed cable, both my wired network and my Wi - Fi network have been detected during installation. Wireless network connected, even my Wi - Fi was not available during the installation.

• Failure of KB974431 update with 8007000D on a clean install of Win7 Pro 64-bit

  Hi all

  I just finished a clean install of Win7 pro 64 bit and everything looks on with the activated product key.  I'm applying 50 some important updated via update, but I have one that fails each time, KB974431.

  According to this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/27737d55-9c10-44b5-b701-6ba147c78364, another person having this problem had luck manually download and install the update.  But it did not work for me (I created a new thread because his son was in the installation forum).

  KB94431 was also causing problems for people who concoct a C004F050 error as in this thread:http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ff57f326-0f1d-412c-a4d0-14de1eaf0836/ although I didn't have this error, I tried running sfc/SCANNOW and he did report that he "finds corrupted files but could not solve some of them."  I don't really know what I should look for in the CBS.  By suggestion of the thread, I installed 64-bit Windows Update Agent and Windows Update is represented nothing doesn't.

  I think I have a corrupted file update is already downloaded that Windows is trying to use each time and it fails.   They seem to live in files Windows\SoftwareDistribution\Download and Windows\Servicing\Packages.  Although I can change the permissions to delete the file in Windows\SoftwareDistribution\Download (and I've tried it without change of failure), access is denied whenever I try to touch the Windows\Servicing\Packages or its content.

  The only installed software were the latest EVGA nforce and drivers for video card, Norton Security Suite and the SoundBlaster last for my sound card driver.

  Any suggestions?

  2010-10-23 16:09:43, info CBS Impossible to extract all files of the firm ? ------C:\Windows\SoftwareDistribution\Download \00236e2e422dab929dcda56260d05350\Windows6.1-KB974431-x64.cab [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, CBS News could not extract all files in \\?\C:\Windows\SoftwareDistribution\Download\00236e2e422dab929dcda56260d05350\Windows6.1-KB974431-x64.cab cupboard [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, info CBS failed to add package: Package_for_KB974431 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.5 [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, CBS News could not prepare start packages [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, error CBS could not process the single-phase execution. [HRESULT = 0X8007000D - ERROR_INVALID_DATA]

  OK, start at the stop of the snap-snap-in services.msc WindowsUpdate service and rename the folder C: \Windows\SoftwareDistribution\ to C:\Windows\SoftwareDistribution_old\ restart the service. Now look again for updates. You are now able to install.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I have a win 7 dvd retail and I did clean install and says now I can't activate

  I have a win 7 dvd retail and I did clean install and says now I can not activate because I only have a dvd upgrade how do I clean win 7 off the coast to put xp on and do it all again

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• When I download windows 8 and try to install it says that we can not connect now, check your internet connection

  * Original title: download windows 8

  When I download windows 8 and try to install it says that we can not connect now, check your internet connection but my internet is good?

  What download link you use. ?  The only one I know is installation media to create for Windows - 8.1 help Windows .

  Given that support for Windows 8 ends, I'd do a 8.1 of Windows Installer Clean , following the procedure in step 4 to activate Windows 8.1 using a product key of Windows 8.  It gives the default product key to install, after which, you can use your key to activate.

• Help to install the update of security for Internet Explorer KB972260!

  Whenever I tried to install the new update of security for Internet Explorer published on 31 July - KB972260 update stops running at about 92% and just hangs. I get an error 80070246 failure code.  Anyone has any advice on how to solve this problem, so I can update the latest patch.

  0 X 80070246 - ERROR_ILLEGAL_CHARACTER
  An invalid character was encountered.

  Try to run the system update tool

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• Epson WF-7520 does not print to tray 2 after El Capitan clean install?

  I don't know what happened, but since I did a clean install of El Capitan, my WF-7520 Epson no longer works correctly. The ONLY way it prints on the 13 x 19 (tray 2) is when I remove it and place it in the top housing (slot 1). In addition, all my photo quality controls are now gone, so high quality prints are no longer possible. I tried to remove and reinstall the driver, but that has no effect.

  For what it's worth, I print using Adobe Acrobat DC of more Creative cloud products. Anyone know what can be wrong?

  Rest the printing system...

  Open System Preferences > Printers and Scanners and select the print tab.

  Right click or control your printer on the left, then click on: reset printing system...

  
  

  Then try to print again.

  If that does not help, download and install fresh drivers from the Epson website > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?infoType=Downloads & oid = 183585

  A new installation can sometimes corrupt the software/drivers and need a new facility.

• stream HP 11 x 360: Touchscreen on stream 11 x 360 does not work after 10 windows clean install

  I did a clean install of windows 10 on my HP 11 x 360 stream, and now the touchscreen does not work. Under system, it says 'no pen or touch input' and there is no driver touch screen not listed under HID in the Device Manager. It worked when windows 8.1 has been installed and it still works in the BIOS. None of what follows has worked previously:

  reset

  several windows updates

  several updates using HP support assistant

  looking through the list of 8.1 windows HP drivers (apparently not all list a touch screen driver)

  looking through the list of drivers for windows 10 HP that was recently added.

  Either by the way, I was about to Flash the BIOS when I noticed that the version on the Web site is f2, and mine is f4. I don't know what that means. I end by flashes, however.

  I remember seeing what I thought, he was a pilot of the touchscreen when you look under programs and features in windows 8.1 before the upgrade. I think it was called magic something or other...

  Microsoft Web site indicate that windows touch support in the oven, so I don't know why it is a problem.

  Update:

  I installed the windows version 8.1 of 'Serial IO driver without connected sleep Support Intel' and he's got the touch screen works, but the accelerometer does not always work.

• Formatting the HARD drive before doing a clean install.

  I will do a clean install with my windows Visa but first told me to format my hard drive. Is that when you go to computer management > disk management, but then I have no idea what to do? It says Disk 0, and then Compaq and recovery. Laughing out loud.

  Tuesday, June 26, 2012 20:11:07 + 0000, Canucksftw wrote:

  Thanks for your reply :) So basically I am following the steps in cleaning a compromised system, because that's what another MVP said that my problems with Windows updates and so on were probably the effects of a hijackware infection. It said to format my hard drive and then do a clean install of Vista,

  I do not know you said that, but it is wrong or you
  misunderstood him. When you perform a new installation, you start from the
  Windows DVD, then follow the prompts. It starts by formatting the drive
  for you, then there is no need to do first.

  and since my system did not come with the CD of Vista from the window I have to do by the Compaq recovery Partition.

  And if you do that, it also begins by formatting the drive for
  you.

  And by the way, your system is almost certainly with instructions on
  How to burn this on a DVD recovery partition and you should
  certainly doing this before you start. You don't want to wipe that
  partition without burning to a DVD first.

  I don't know exactly what I should do when it said to format my hard drive. It won't replace anything, which means getting rid of the previous things?

  Yes, it deletes everything on the disc. So make sure that, before
  from, save you on external support all important files for you.

  Because I don't want to do a clean install, then update all and then see my computer is still messed up.

  That's highly unlikely. But (and this is a big but) If you had "dirtied".
  to the top"by something you did, there is a good chance that you will make the
  same thing again and get 'messed up' all over again. It is one of
  the main reasons according to formatting and reinstalling Windows is
  usually a bad approach to solving a problem; It is best to find
  This is what the problem is, and what it, so that you don't make the
  same thing in the future.

  One last point: after the new installation, you will need to
  Restore the backup that you made your files and reinstall all your
  applications of their original medium.

  Ken Blake, Microsoft MVP

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

• After a clean install of Windows 8, I can't get three monitors to work

  I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

  "The display settings could not be saved.  Please try another combination of display settings. »

  All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

  It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

  I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

  In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

  I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles