After downloading the last update for my iphone 6, it caused a problem with Siri... everyone has experienced the same thing?

I downloaded the latest update for my iphone 6.  Siri now does not work.  Is there a link?

Yes, lately, siri is useless for me.  Every time I try to create a reminder (of dozens of times a day) it says "a s...". "followed by"I'm sorry, I couldn't create a reminder. »

Turn off the phone and then back on (full stop) restores this feature for about 30 minutes, then it stops working again.

Also, when I say "Open recalls" Siri she responds with "I'm sorry, but I can't find an application named"reminders"on your phone.

This is despite the fact that the reminders app is RIGHT THERE and there and APPLE APP.

Ridiculous.

Tags: iPhone

Similar Questions

  • Thunderbird download the same message, off guard popstate.dat antivirus, renamed to old, still have the problem. Ready to upgrade to Outlook or another prog to mail.

    Read about other similar problems in the forum, tried the possible one - Disabled popstate.dat antivirus solution, renamed popstateold.dat, TB closed, reopened to he downloaded e-mails until the more recent with the problem and still trying to download it again and again. Can't download at the end, as refreshment shows always the same amount still on the server to download, even after downloading the same message several times. This has happened several times in the past months, with several duplicates, but not this loop continues. This is the second time in a week where this has happened. My first attempt to fix - I copied all the .msf files to the new location and uninstalled TB. Then reinstalled and back .msf files. He seemed to be ok for a few days, but now have the same issue. All windows updates to date, was updated to the most recent version of TB before it happens.

    Try to connect to your account via webmail and delete the problematic message.

  • Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

    Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

    Greetings Dani56777,

    Thank you for using communities Support from Apple!

    I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

    If you need information on how to update iTunes, please follow the instructions in the following link.

    Download the latest version of iTunes for Windows - Apple Support

    If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

    Remove iTunes Control Panel and its associated components

    Use the control panel to uninstall iTunes and software components in the following order:

    1. iTunes
    2. Apple Software Update
    3. Apple Mobile Device Support
    4. Hello
    5. Apple Application Support 32-bit
    6. Apple Application Support 64-bit

    On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

    Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

    Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

    Have a great day!

  • After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

    After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

    Open Safari while holding the SHIFT key

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • The last update for Adobe Acrobat Reader will not install on my iPad 2. It downloaded, but I do not stall.

    The last update for Adobe Acrobat Reader will not install on my iPad 2. He has downloaded, but fails to install. Have used the drive without problems so far. I have the latest update installed on my iPad ios. How can I solve this?

    Hi joannaw84630025,

    Restart your iPad, make sure that iOS id updated to version 8 or higher. Once rebooted try to update Acrobat Reader Adobe Acrobat Reader from the App Store again

    Kind regards

    Meenakshi

  • I can't download the last update for Adobe Muse CC. I was in charge of this formum. I have an error message "ERROR Adobe Muse CC met a now error and will exit. Please report the last actions bit that you have taken to this error to th

    I can't download the last update for Adobe Muse CC. I was directed to this forum. I have an error message "ERROR Adobe Muse CC met a now error and will exit. Please report the last actions bit that you have taken to this error to the Adobe Muse CC team. Try to instantiate UID U4691, but lastAllocatedUID is only: 4491 OK

    I would be very grateful if someone can help me solve this problem. I tried the Adobe Muse online chat, but they directed me to you... I'm in the middle of a project for a client and my deadline is Thursday, April 21.

    I'm not familiar with the use of the forums.

    I looked online updates, I have no idea what to do.

    Deb Kelleher

    [email protected]

    has responded to your other thread, , I can't download the last update for Adobe Muse CC. I was in charge of this formum. I have an error message "ERROR Adobe Muse CC met a now error and will exit. Please report the last actions bit you took for this error to th

  • Have to restore the ipod after downloading the update. Question, help please

    Hello!

    I have a large music library on my iTunes and so all my music does not fit on my iPod Classic 160 GB, which is fine.

    I have the latest version (last one that came out) the iPod Classic 160 gb.

    I have the latest version of iTunes.

    I use Windows 7.

    So basically I had no questions for recent years until last week.

    For a long time, I went through my collection of music [in view of SONGS] and placed check marks next to all the songs I want on my ipod.

    It's the way I like it. I have enough free space on my ipod for new music, I get every month so that it works.

    I connect the iPod to iTunes and SYNC my library, and it adds new songs I added to my iTunes library since I'm finally connected.

    Okay - here is the problem.

    Last week, when I connected my iPod Classic to iTunes, I got a saying there was an update to download.

    I am used to what is going on all the time with my iPhone, but I can't remember the last time there was an update for my iPod.

    Intrigued and not think what awkward or troublesome would come from him, I'm agree to download and install the new update.

    When he did download it says that it does not recognize the device (iPod). After searching for hours for help, I finally disconnected, stop, restart and rec-connected my iPod to iTunes.

    He says that he has no music on my iPod. I checked and it was not. He disappeared. ***!?!

    Fortunately, all my music was always in iTunes so I went with my library SYNC (again, I have the titles I want selected already). He said he could only and basically the only option was to reset my iPod to its factory settings. Because the way that my iPod is empty anyway, I thought, fine, so I did. I have restored its original settings.

    Later, I did the same thing after disconnecting. Shut down, restart, clean the cache and the registry, etc and then reconnected the iPod to iTunes. My first thought was maybe I should try to download the update again - since the ipod is empty at this time - what the *, why not - I would rather finish now than get my music on my iPod to be prompted to download new update, and start all over. So I clicked Check For Updates when my iPod was connected to iTunes and it said there is no new update. I don't remember the exact update, but I'm sure it was like 2.05 something, and what I have now (and had before all this happened) was 2.04 or something like that. So does well, no update? No matter what. At this point, I'm SO frustrated - I want just to SYNC my library via checked/selected songs and get back them on my iPod.

    When I went to SYNC, nothing happened.

    So I went to the tab that showed the music and it only gives me the option to SYNC my library of ENSEMBLE music (which is too large and does not fit on my iPod) - OR - I can go through this form on this page and browse and select the ARTISTS that I would like to add.

    It's so frustrating. First of all, I don't want to pass by and re - select all the songs I want to add - the main reason being - he did already - when you click on my library and select the songs view, you can see all the songs that I previously have selected/checked remains unchanged. Second, if I had to do it the way he wants me to all simply by selecting ARTISTS who will not work.

    Sorry for this long crazy question - but basically - how now factory - reset iPod Classic for SYNCING with my iTunes library with the songs of checked/selected, I already have checked - and not to go through and do it by limiting my will and have to select only the artist (not to mention that I did as I want).

    I appreciate any help or insight that someone could offer.

    Much appreciated!

    On the settings screen of the iPod summary (what you see in iTunes when you select iPod), there is a checkbox to Sync only checked songs and videos (wording may be different for your iPod).  Enable (check) this setting in combination with sync entire music library.

  • I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

    I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

    Try the following. It seems yo may have to let the battery drain is completely:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • After downloading the updates, I can't reboot my pc, so now I can't receive updates.

    After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

    Hi stevenstar,.

    a. you just download the updates of Windows or you have installed them as well?

    1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
    Once the computer restarts view the Windows update history and check if updates are installed.
    See the Windows updates are installed
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
     
     
    2 type eventvwr.msc/s in the address bar.

    The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
     
    For more information on event viewer, see the articles below:
    Open event viewer
    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
    What are the information contained in the logs of the event (Event Viewer)?
    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
     
     
    We hope to hear from you soon.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

    original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

    I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

    I would be grateful for any suggestion.

    Alan

    Help us help you: start by reading this post 'sticky '...

    What information to post in the Windows Update forum
        http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  • A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

    OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

    First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

    Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

    After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

    I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

    I tried to make the old default iphoto but picture still open when I plug in my iPhone?

    When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

  • I have a cloud of account creation and I want the last update for lightroom cc because I have a new camera the Olympus pen 7. Now, I can't open RAW images in lightroom cc my account number 800-832-6687 IRL (by payment)

    I have a cloud of account creation and I want the last update for lightroom cc because I have a new camera the Olympus pen 7. Now, I can't open RAW images in lightroom cc my account number 800-832-6687 IRL (by payment)

    Office CC lists the applications as "up to date" when they are not

    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

    - and added the step https://forums.adobe.com/thread/1529654

  • Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

    Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • After downloading the trial version free effect page works. It shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for a few days. This problem will be solved soon?

    After downloading the trial version free effect page works. It shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for a few days. This problem will be solved soon?

    Hello

    I tried the method via install CreativeCloudInstaller, it shows no AE in the application list.

    It seems that I do not meet the minimum requirement for the installation of AE, my computer is 32-bit instead of 64-bit.

    It would be more useful if they show the more accurate message in installer CC and the free trial link page in the Adobe Web site.

    Thanks a lot for all media!

Maybe you are looking for

  • To access Advanced Options in BIOS on Satellite U500-12J

    Hello on my Satellite U500-12J my BIOS menu is quite simple. Hardly more than 20 options altogether... :-( In order to get my work of virtualization, I need to check / IO 'APIC' and "PAE/NX", which seems far beyond the scope of what Thoshiba allows m

  • was not able to install kb2761451 got error code 80070017

    I get code error whenever I try to update kb2761451.  What should I do about it?

  • ArcSoft Connect Daemon has stopped working

    At the start of my laptop, I always get the message "ArcSoft Connect Daemon has stopped working". -What this means or what should I do? Original title: "ArcSoft Connect Daemon".

  • EA4500 Router FTP Server Security

    I have a general question around the FTP server on the EA4500, is it safe? I don't see any option to use TLS or SSL, or specify only implicit/explicit connections. Is it safe to use the FTP server to the external? Any help appreciated.

  • Blocking ICQ traffic on router 2620

    I needed to block all ICQ traffic coming out of my network. Did a search on the Internet and found that ICQ uses two port numbers as possible for the 4000 and 5190. I set up both of these ports and it seemed to do the trick BUT... I discovered that I