After Effects 10.0.1 upgrade fails, error code: U44M2P7
So, after having to reinstall the adobe application manager. I finally got to install the new after effects update. However, the update fails and it gives me an error code: U44M2P7.
I ran the Support Advisor, and all he said was: ' Inspection found a problem but cannot determine the cause or corrective action. "
Does anyone have a solution for this? This update is supposed to fix the things that constantly made my accident to After Effects.
Thanks, Pete
If you use After Effects CS5.5, the latest version is 10.5.1. See the next page. As this page says this update is not available through help > updates. This update fixes two bugs. It is not a critical update, unless you need it for these two bugs. None of them are accidents, so this will not help with accidents that you quote.
The reason why you got an error, is that you tried to install a (10.0.1) update for After Effects CS5, not After Effects CS5.5.
This page contains the most recent bulleted list updated for each version of After Effects.
Tags: After Effects
Similar Questions
-
Satellite A500 PSAM3E - Windows 7 upgrade failed - error code: 0 x 80070570
I install the win7 update on my Satellite A500 PSAM3E and when I arrive in windows files is growing - it stop and a pop-up message:
* (Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070570). *
Stop the installation and I could do nothing, I restarted the upgrade but still the same.
I just got my win7 DVD from Toshiba, the corrupt DVD upgrade or other issues, before the installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
Need help from the expert who have already done the upgrade.
Hello
> before installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
And why you didn t do?
Maybe you run an earlier version of the display drivers and so you should uninstall them before you start the upgrade.
Check it!After the upgrade, you can install the latest version of the Toshiba page display driver.
By the way: Here you can find an update step by step:
http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm -
Update for Windows XP (KB2567680) security has failed - error Code: 0 x 80070003
Security update for Windows XP (KB2567680) failed - error Code: 0 x 80070003 I tried to install update 3 - 4 times but it continues to not be updated, can someone please tell me what to do.
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=falseError message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
http://support.Microsoft.com/kb/916248Some have had success with
1. stop the service automatic updates, clear the contents of the DataStore and Download folders and restart the automatic updates service.
Stop the automatic updates Service.
Click Start, choose Run, in the run box type services.msc.
Click OK.
Right-click the automatic updates service.
Select Properties.
Under Service status, click on stop.
Click OK.2 remove the contents of the DataStore and Download files.
Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
Click OK.
Delete the contents of the DataStore files so download3. start the Service automatic updates
Click Start, choose Run, in the run box type services.msc.
Click OK.
Right-click the automatic updates service.
Select Properties.
Under Service status, click Start.
Click OK.This procedure will erase your history on the Windows Update Site.
-
PING: transmit failed, error code 5.
Hi chris,
I also have similar problem like this. my network connection is ok & its working fine, but I'm not able to ping giving following error
C:\>ping 192.168.1.25
Ping 192.168.1.25 with 32 bytes of data:
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.
PING: transmit failed, error code 5.Ping statistics for 10.22.22.1:
Packets: Sent = 4, received = 0, lost = 4 (100% loss),C:\ >
And disconnect it from the network showing connection
error display:-connection stetus: unknown "the dependency service or group could start.
When I go to start 'network location awareness' serivece in error 1073741288.
In all this I have network surfing condition smoothly. but not able to connect to the local network % showing ping disconnect on the taskbar.
Help me please to this problem...
Patricia
Hello Patricia,
Thanks for posting your question on the Forum of responses of Micrsoft.
I don't know exactly the question that your question was separated from the previous thread.
What you ping? Another computer on your network? You are in a domain environment?
Are all the computers on your network, Windows Vista or Windows XP?One thing, you can check to go in the registry.
1. open the Start Menu > run and type regedit and press the Enter key
2. navigate to the following location
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa
3. Locate the restrictanonymous key4. double-click on the key, set the value to 0 and press OK
5. exit the registry and restart your computer for the changes to take effect.If please reply back and let us know if this helps with your error.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Security Essentials installation failed, error Code: 0 x 80070643
Security Essentials installation failed, error Code: 0 x 80070643
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/msestart/threads
Installing and upgrading Microsoft Security Essentials program.
They will help you in the Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
All of a sudden I started my laptop and Windows does not load. I received a message "failed to nobulate". I searched in the help forums and found that I could create a boot CD (because the OS came preinstalled on Dell INspiron 1720 laptop computer). I tried to perform a Startup Repair 11 times. The repair details show:
Boot critical file c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2
I also tried to visit the advanced repair and selecting to restore from an earlier point in time, but I relieve error that no previous points are detected.
Help, please! I '; ve been against a week and need back up and going. Thank you!
Sue
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon
Mick Murphy - Microsoft partner
-
Targeted Read Test failed [error code: WHD16-CSB]
I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)
The unit has reported the following State: the previous self-test completed having the read element of the test failed. The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)
Please help me find a solution.
The reader is 23398 market h years. Thats 974 days or years 2.67. If the drive is probably dying if not dead.
Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.
The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
you do not have a retail receipt. -
SMART short Self Test Failed - (error code: WHD16-8NR)
Hi all
I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.
To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.
The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.
I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).
Event log:
Dell Support Center log file
March 17, 2016 16:53:55
Overall result: failed-------------------------------------------------------------------------------------------------------------------------------------------
ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
-------------------------------------------------------------------------------------------------------------------------------------------Seller: Seagate
Model number: ST9750420AS
Serial number: 6WS100EG
Firmware revision: 0005DEM1
Size: 698,6 GB
Rotation speed: 7200 RPM
Cache size: 16 MB
Temperature: 43 c
Physical sector size: 4 KB
Logical sector size: 512 B
Count of logical sector: 1465149168
Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
Specification Version: Rev ATA8-ACS 4----------------------------
OS - C: [PARTITION:C\\.\C:\]
----------------------------File system: NTFS
Volume serial number: 5087-8802
Volume capacity: 679.00 GB
Amount of free space: 568,63 GB
Volume space used: 110,37 GBTest of the SMART State
Test started - 17/03/2016 16:43:57
Finished test:-17/03/2016 16:43:59
PastTest of SMART thresholds
Test started - 17/03/2016 16:43:59
Finished test:-17/03/2016 16:44:01
PastTargeted reading test
Test started - 17/03/2016 16:44:01
Finished test:-17/03/2016 16:44:05
PastTry to search randomly
Test started - 17/03/2016 16:44:05
Finished test:-17/03/2016 16:44:54
PastFunnel Seek Test
Test started - 17/03/2016 16:44:54
Finished test:-17/03/2016 16:46:14
PastShort what SMART self-test
Test started - 17/03/2016 16:46:14
Error message:-17/03/2016 16:46:24
The unit has reported the following State: the previous self-test completed having the read element of the test failed.
Error message:-17/03/2016 16:46:25
The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
Finished test:-17/03/2016 16:46:26
Failed (error code: WHD16-8NR)Surface Scan Test
Test started - 17/03/2016 16:46:26
Finished test:-17/03/2016 16:47:25
PastSurface Scan Test - 2
Test started - 17/03/2016 16:47:25
Finished test:-17/03/2016 16:48:58
PastI also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.
In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.
My simple question is, do I need a new hard drive with the information I've provided?
Thank you very much!
To all those who read this topic:
I rang Dell directly and they confirmed my hard drive needs to be replaced.
8792 power over time, I think that its actually me good.
Bravo and thanks for the reply ejn63
-
Converter Standalone Agent installation failed, error code: 1601
Hi all
I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.
We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)
I installed you VMware converter and disabled the firewall on both machines.
I also disabled the network drives that are shared on the remote computer.
When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.
If you press 'Yes' to continue, after a minute or two the following message appears:
-Converter Standalone Agent installation failed, error code: 1601 -.
Can someone tell me what this error code means and how I can fix this error?
Any help will be appreciated cincerely!
Sincere friendships and thank you in advance,
Marcel Lefèvre
the Netherlands
Can someone tell me what this error code means and how I can fix this error?
Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.
Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.
Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).
Kind regards
Jonathan
B.SC., RHCT, VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Restore failed - error code = 0 x 241
I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.
I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.
I could really use some suggestions. Help, please.
Thank you
I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.
-
Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007
Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007. BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.
them, but the update continues to fail. Any help would be appreciated.
Hello
Perform the steps from the link below and see if it helps.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Hope this information helps.
-
Update for microsoft works failed, error code 646. I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high
-
"Restore failed, error Code 1117
I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased. I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error." I can get nowhere excpet the F2 screen, so I don't know what the problem
Hello
· You did changes to the computer before the show?
· You are able to boot to the desktop in normal mode?
Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:
CHKDSK X: /R
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
Reference: Startup options (including safe mode) advanced
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2: follow the instructions from the link to fix the problem:
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
-
CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6
U44... Update error http://forums.adobe.com/thread/1289956 can help
Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
PS CS6 cannot be implemented until even after uninstalling and reinstalling. And the error code is 16.
Maybe you are looking for
-
It now takes a double click to open an email. How to open on the first click?
-
Disable/force Boolean controls
Suppose I have two Boolean controls A and B. Now I would like to diseble control B and force it to false when A = true. I know I can do it by changing properties (value and disable) B control via a "property node. Am I wrong? Now, what happens if bot
-
BlackBerry App amazon appstore on the passport of BlackBerry
Hey guys, I have a problem that cannot be solved by the amazon customer Service, I have to remove the amazon appstore and reinstall it. The problem is that as the app is pre-installed, I can't do it, can you tell me how to do it please? Thank you!
-
Newbie: GridFieldManager ignores HORIZONTAL_SCROLL
Hi all does anyone know a solution for this: When I put HORIZONTAL_SCROLL as style for a GridFieldManager I can't horizontal scrolling. The same code with a HorizontalFieldManager works fine. I work with the eclipse BlackBerry plug-in 5.0.0. I alread
-
Monitoring of the IIS Service Manager.
Hi, I have Foglight 5.5.8.2. I know that I can control the IIS server with the windows agent but how can I follow the following. Manager of IIS - application (DefaultAppPool, pmsnet, PMSNetInstal, pmsnettrain) Pools The Internet - websites (default