After freaked out power, my mouse pointer is frozen on the top left of my screen. I disconnected all devices and it is still frozen

Similar Questions

• How can I stop auto scroll when the mouse pointer is placed on the scroll bar

  When the mouse pointer is placed on the scroll bar, it goes into an auto mode, scroll upward or down very fast scrolling. Happens on file selection windowswith any application, it must be Windows.

  Too bad. It was a matter of Firefox.

• The mouse pointer does not stay on top

  I use installation of 'Show the mouse' in conjunction with screenshots (static) (only is not the entire screen) to simulate our application.
  
  I find that sometimes the pointer of the mouse movement made its appearance behind the image even if the object of 'Mouse' appears at the top of the pile on the Timeline. Right click on the object of 'Mouse' on the chronology does not give me a "Foreground" option, so I'm at a loss on how to solve this problem. Tips or workarounds for this?

  Hi all

  In addition to the excellent suggestion of JulieW and this was mentioned a little by the DilbertG, I had this happen to me from time to time. Even if I looked at the timeline, the mouse was sitting there on the top layer all large as life and twice as natural.

  My dose? -Drag the mouse down the layers of the timeline. Now another slide to call it in the editor. Return to the original slide , then drag the mouse to the top of the timeline layers.

  Hope this helps... Rick

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• I can't 'click' on the top inch of any screen in the case of firefox. It won't let me sign in and out of some Web pages. This happens not when I'm on my desk or using IE. I like firefox, but it's frustrating. Help!

  I can't 'click' on the top inch of any screen in the case of firefox. It won't let me sign in and out of some Web pages. If I reduce the screen that disappears not or the other. This happens not when I'm on my desk or using IE. I like firefox, but it's frustrating! Help!

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again with

  I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again without success.  Any suggestion would be appreciated.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the full Setup offline reader for the version you want from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• I have a modal using html and css that opens very well.  However, given that modal is on layer 2 layer 1 objects fade out (gray out) in the background.  I can't put the modal on the top layer, so that it appears on all my pages.  It is specifi c that

  I have a modal using html and css that opens very well.  However, the modal is on layer 2 that the objects in the layer 1 fade out (gray out) in the background when the modal opens.

  I can't put the modal on the top layer, so that it appears on all my pages.  It is specific to the single page on my site.

  Here is the link: http://www.ueonline.com/website_NEW/certificationsapprovals.html#openModal

  Any help is appreciate!

  You can create a separate mask for this specific page with modal to the top layer and then apply that master page.

  Thank you

  Sanjit

• Escape the mouse pointer when you press the space bar

  My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

  Hi Dave

  I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

  Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

  Good luck!

• Professional Windows Vista using in a HP tablet PC, the pointer of the mouse escapes very often moves to the top left corner of the screen. I'm only using the touchpad.

  The cursor moves to the left corner (on top of the trash) several times when I'm working on the computer. This work is to find Web sites and using the office 2003 programs. No games or watch video.  What can I do to fix this?

  Hello

  Control Panel - mouse, TouchPad controls are there and you may also have a TouchPad icon in the
  Taskbar near the clock in the bottom right. Also there are probably shortcut keys that can affect the TouchPad so
  see the Forums and the Support from the manufacturer of your system.

  The sensitivity of the TouchPad, special areas or any function of the snap and other parameters can play a role.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• UP3214Q REV02 - all windows resized to 1024 x 786 and moved to the top left after the power monitor cycle

  Hello

  I recently got a model REV02 my REV01 developed a fault. However, it seems as if these screens maintain their unwilligness to allow us to save energy by turning off the screen when you need a bathroom, coffee break or something else. Whenever you turn off the screen, then turn on again (be it a few seconds later, or minutes to hours later), all open windows will be resized to 1024 x 786 pixels and placed in the upper left corner of the screen.

  This happens on the Intel cards and nVidia (GTX780TI on 347.52, intel Hd4400 on 15.36.14.4080 drivers drivers). I went throug the playbook together to offer the GFX card, so reset screen, remove the drivers with uninstalling the driver and perform a drive clean reinstall, and swapping the cables (I have a bunch of cables apprived dell when they initially did not want to send me an A01 to set half of the image & had the A00 sleep problems). Happens DP1.1 and DP1.2 mode, and it happens 10 times out of 10.

  Anyone with a UP3214Q who sees this behavior as well? BTW, this is my 3rd unit of REVA02, they all exhibit the same behavior (exchanges were not made because of that, but it confirms that the problem is not related to a defective unit).

  See you soon

  It is a common problem among the monitors UHD, a lot of posts here about it - they take longer to wake up causing the driver GFX their definition to a safe lower resolution before them at their native resolution. The latest 14.2 AMD drivers seek to correct this problem, and you will probably see the same kind of difficulty in the future of the drivers from NVidia and Intel.

  In the meantime, if you use Dell Display Manager (DDM) and are comfortable editing the registry, try to add the "RestoreWindowLayout" value to HKEY_CURRENT_USER\Software\EnTech\DDM and set it to 1 (dword).

  You will need to have the latest version of DDM (b.1554) for this to work; Hold down the SHIFT key while right-clicking on the DDM notification icon and select "Check for new version" in the context menu.

• Horizon view Agent 6.0.2 Windows 8.1 desktop - size setting display scale causes mouse which will be pasted in the top left corner

  Hello

  I am having some problems when I try to adjust the size to the scale option in the Virtual Office Windows 8.1 with view agent 6.0.2. When I try to change the scale via Control Panel -> display -> option to change the size of all the items ( view failover control settings is disabled by VMware KB: Settings tab is not available in the display panel of a Horizon view desktop locally when t...). After that, the mouse pointer gets suddenly blocked until the upper-left corner, and I'm unable to move the mouse pointer on this corner that the mouse pointer continues new jump in him. When I change the scale to the original (use the keyboard to change the setting), the behavior of mouse pointer returns to normal.

  Anyone else having this problem?

  Found the solution by adding a registry entry:

  Location: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Teradici\PCoIP\pcoip_admin_defaults

  Name: pcoip.disable_cursor_jumping

  Type: REG_DWORD

  Data: 1

  After that it is defined on the parent image and recomposed (or reboot if you want to set this on a persistent desktop computer), there is no more mouse pointer jumps after changing the scale of the fonts/AC.

  This was indeed listed in KB here — not exactly the problem listed in the KB, but it is quite similar:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2060701

• Viao Duo 11 pointer running because of the upper left corner

  I have a Viao Duo 11 hybrid PC since early November 2012. I had not noticed this before, but recently I noticed that the mouse pointer is if run in the upper left corner so often that doesn't let me do my job properly. Initially, about 2 months ago I noticed this but ignored because the problem was not that bad. But now I can't use something works on this computer. It took me 2 hours to write this message because of this problem of mouse. Help me because my computer expesive becomes useless. I googled and found a lot of this questions but no solutions.

  I came across the following solution of driver update in the forum of deshminder tablepcreview.

  http://www.n-trig.com/files/Sony_Win8.zip

  It worked for me. Thanks again to Deshminder.

• After October patch Tuesday (ignoring the patches identified as defective) screen scrool is seriously slow and jerky. Updated graphics drivers (AMD). This screen is sl

  First: explain to people who come here that the possible small text on the logon screen is not the text of the actual issue, but a title. Mozilla in general (and this is a problem in my mind) requires more that a common user will know trying to find or post something about your products. Generally poor user interfaces. After having entered my information and proceed to the next step: what on earth are the options you provide supposed to do? Come on; Get a non-specialist to look at these things that you present to users to simple English-language dailies can see what you mean!

  After you have installed the files from Tuesday October patch (not identified as defective, extensive research on the web), my screen is too jerky and delayed when I scroll through the page or enter text.

  I installed the last chart AMD drivers/software. I looked for things that may interfere. My final test was to copy the url of this site in Firefox to IE. No problem with IE.

  ERGO, there is a problem with Firefox. Regardless of the cause.

  Please try to find a solution.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     and select Options

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  This solve your problems? Please report to us!

• mouse cursor not active at the top of any Web site in firefox, please help me?

  Dear Sir.

  my mouse cursor is not active at the top of any website in firefox. but the cursor is active in the site to anywebsite and the cursor is also active in other site.example, oper, internet browser explore etc.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Program shows just like a small strip at the top left after the resumption of the hibernation

  My program shows itself sometimes only as a small strip once Windows comes out of the hibernation.

  Everything seems to be the program. Only sometimes.

  I can maximize and it will go the the corner, but always shows only the small band.

  I can move it around, but it will show more than the small band.

  I can close it from the Task Manager, but lose all the data that I didn't save.

  It will open normally again.

  Running Windows 7, 1920/1080 with the latest AMD video drivers.

  

  Hi Mark,

  Thank you for the update.

  If possible, I'd suggest to uninstall the program and re - install to see if that solves the problem. If this is not the case, because this application is developed using .net, I would recommend to post your query in MSDN.