After having cleaned my Satellite A100 display no longer works

I opened my Satellite A100 to make sure it is clean. After opening it, I decided to close this back. After I put all the screws, and I turn on the laptop, there is no display on the screen but the mother/processor board works very well.

Also, I reopened the laptop and checked the material and saw that near the port where you can connect a monitor, the white piece of hardware are separated, if I can connect these two back, I think I can make it work.

Can someone help me please?

Hello

Looks like you have accidentally disconnected (removed) the FL inverter cable or video cable that connects the screen LCD with the jury.

Usually it of not recommended and not recommended to disassemble the laptop if you have no experience. During this process other parts can be damaged and therefore jobs must be performed by a technician for laptop.
I see that you have already opened the laptop and the warranty is not valid.

It of always difficult to explain this procedure and so I goggled a bit and found this page useful:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

The laptop described on the page is a Sat A105 but very similar to A100
Good luck and be careful.

Tags: Toshiba

Similar Questions

  • After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

    After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

    What can I do?

    Start the command prompt, and then type

    sfc/scannow

    Do check and see what the result is.

    Also run full system scan with:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Control of Toshiba Satellite A100: Buttons no longer work after the Xp update

    Toshiba satellite A100 iOwn and use Windows XP Edition family.
    After installation of windows update a few days ago from the functional buttons on the left side of the keyboard stop working - I can use the top running internet explorer or windows media player, but the other 3 buttons do not respond.

    I tried to run the system in the previous point, but it gives me error...
    Utility Toshiba for the buttons has been downloaded and reinstalled but still not result

    Download and install CCleaner tool. This windows registry repair tool. It s for free. Repair you the OS.
    Download the right modules common to you notebook series from Toshiba page, then reinstall it.

    After new control restart if the Toshiba control buttons functions!

  • Satellite M70: Battery no longer works

    My brand-new satellite M70 battery no longer works. I haven't used the phone for about a week and when I tried to start it (on drums), he did nothing. The battery was still charged (63%) I need to connect the power adapter to make it work.

    During this time the battery LED is still orange. Battery is not charging, the battery remains at 63%. I tried to remove the battery for a while and put it in, but that does not change...

    How can I solve this problem?

    Hello

    Maybe the battery has a malfunction. It would be very interesting to know if this problem occurs after the replacement of the battery.
    According to your assignment the guarantee must be valid, that the battery replacement should be done for free.
    I recommend to contact Toshiba service partner in your country and seek help guys.

  • After the cc update all dynamic tools no longer work. How can I solve that?

    After the cc update all dynamic tools no longer work. How can I solve that?

    What system?

    What Dynamics tools exactly?

    What exctly you do step by step?

  • No display after installing linux on Satellite A100

    Hi all

    The weekend, I decided to install linux on a partition on my toshiba satellite a100. I did a new install of windows from the recovery cd and everything worked fine. I then installed linux on an extended partition and my computer does not display anything on startup - (the LCD has a backlight) and I get all the beeps and reads it from CD etc. The strange thing is that I can plug it into an external monitor and it works fine. When I start with an external display I can then go to the LCD screen and I get a screen but it is very slow and has a lot of flaws.

    I've updated the bios, installed the latest graphics drivers (ati), but still no improvement. Since the linux install I deleted the partition scope and installed windows from the restore CD (still no improvement).

    Does anyone have any suggestions as to what I can try next?

    Thank you in advanced for your help.

    Ask what you can do?
    Delete and format the whole HARD drive and reinstall the OS from the recovery CD.
    If you want to use Linux, I advise to use a Knoppix. You can get it on the Live CD and it s not necessary to install it on the HARD drive.

  • Satellite A100 - display balack after replacing the LCD screen

    Hello

    So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

    When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

    I think it is the inverter, any suggestions?

    Could be the sensor cover?

    Thank you! Kyle

    Hi Kyle,.

    Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

    Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
    Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

  • Satellite A100-906: display no longer works

    Hi all
    For me Satellite A100 with NVIDIA GeForce Go 7600
    I met such a problem. LCD monitor from another manufacturer via D - Sub is connected to a laptop computer.

    Mode used ForceWare customizations DualView, for the display of a laptop exposed the screen resolution 1280 x 800, for LCD screen accordingly 1680 x 1050.

    All worked normal before restarting the system. After restart, the screen of a laptop computer disappeared and does not any longer, it is only visible, this highlighting of a matrix works. A computer screen laptop not everything works more generally, the lamp to highlight show, even to the external display disconnected.

    Please advise something!

    What happens when you disconnect an external monitor and the power of your laptop? See Toshiba welcome screen?

  • Sound problems after installing Vista on Satellite A100

    Hello

    I have something new, something I've never seen and I do not much [as appropriate] of you.

    Today, I installed Windows Vista Beta 2 on my laptop Satellite A100-192. As it is Vista compatible now [I added some memory] I think it's the right time to see the new operating system [that is great, he will rule the world for sure].

    But back to the topic.
    After the installation of Windows Vista, which has detected almost all of the software in my pc and have fun on this topic / and there are a lot of things an old fart like me, can have fun with / I decided it's time to get back to work.
    So I restarted my toshiba for win xp, started working and has decided that music will surely improve my / concentration i'm from Poland and as many of you know, my team lost the first game of the 2006 World Cup. so they will not pass the group stage of WC2K6--real cause my humor today. After turning on my foobar, I realized that I don't hear nothing/i do not drink, so he can't really be the cause. I've set all volume settings, all the settings of the sound and nothing! I tried headphone jack, but it does not work too. I tried reinstalling the drivers, reboot the system several times and... nothing.
    I went back to Vista and... sound works like a charm.

    Bromine to Vista my sound on XP...

    Anyone has any bright ideas, how this could have happened and how to solv it / accept to remove vista from windows...?

    I would be greatfull for some advice...

    Best regards
    Krystian

    Hello Krystian

    If you use recovery media supplied for installation of WXP is the noise problem persist?

  • Bluetooth not working not not after reinstalling Win XP - Satellite A100-712

    Hello

    I have a problem with my Satellite A100-712. He took BT BT worked perfectly before reinstalling windows. I reinstalled windows using the original Toshiba Recovery CD. After you have reinstalled, BT is no longer working. Monitor of BT icon does not appear. When I swicht BT on (Fn + F8 or "manual switch on the lid of the laptop) it starts installing bluetooth. But the installation progress bar stops at some point and that's all. I tried waiting etc, but nothing helped.
    You can only cancel the instalation.

    I tried several versions of BT software, but even with the original - provided on the recovery CD, it doesn't. I am attaching the screenshot. As far as I know, the problem is quite common, but I have found no satisfactory solution...

    I hope you can help me with this!

    [http://www.quickphotohost.com/uploads/8f0614e068.jpg]

    Kind regards

    Jajoos

    p. s.

    the screenshot says: installation of the BT device. Please wait...

    Hello

    You are right. The A100-712 supports Bluetooth without a doubt.
    Then you should be able to install the BT stack correctly.

    As mentioned; BT can be activated properly using FN + F8 and installation starts as well, but he does not terminate
    Hmm I'm not quite sure what could cause this but maybe his problem of m system software.
    I think it is to recover the laptop once more
    Activate BT, then check if the progress bar would begin and could complete the installation.

  • Satellite A100 display empty but external vga works

    Hello
    my two-year old Satellite A100-847 screen has stopped working. I used the external VGA monitor for a few days,
    and then switched back to laptop computer LCD and discovered that it doesn't work. It shows nothing, only the gray backlight.
    The LCD does not work even at start-up in WIN XP, or AC or battery power. I tried to disassemble the screen according to some guide
    to check if the cable is firmly in his place in connection to the LCD, but it has not solved the problem.
    I use the original BIOS and the somewhat updated nvidia display driver, it worked fine until now, so I suggest this isn't a driver/bios problem.
    (but maybe that is it, so I tried to install the original display with no effect driver.) I don't want to try to Flash the new bios and meet up with Kiss to the top view and bios too)
    Video output for external monitor is quite well, start-up or in the victory.

    Everyone sees a solution, please? Or should I just go to the service provider...
    Thank you
    Pepe

    I think that it s a hardware problem of the display or the FL-inverter.
    The FL inverter is part hidden somewhere close to the screen.
    It controls the backlight of the display.

    So you should go to an ASP, they can order the parts and exchange it or looking to ebay for a complete display and Exchange yourself.

  • HARD drive click after update Bios on Satellite A100

    Hello.
    I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

    The bios update was published in 26/11/2007.
    Does anyone have the same problem?

    Thank you.

    I put t think it has something to do with the BIOS update.
    I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

    There are several times in my HARD disk created similar clique and sounds but it s runs great
    I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

    Best regards

  • Satellite A100-011 - Bluetooth not working after installing Windows 7

    Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

    I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

    Let me add that the WiFi is working normally.

    Hey,.

    I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

    Check Toshiba Bluetooth portal for the latest versions:
    http://APS2.toshiba-tro.de/Bluetooth/

  • Satellite A100 - wireless/network not working not

    Hi all I'm new here and even though I think I know a little about PC I seem to forget that I have learned.

    I have a lappy Satellite A100, which was connected to a home network wireless and worked very well. After travel further using another wireless USB device, I would return home put on wireless and connection obtained immediately.

    On a recent trip to Bali, I discovered that there are free hot spots wireless everywhere, however I had problems with the connection on trying to connect and could hang, past my expertise so went to a guy who has tinkered with Lappy I wss then you connect wherever I went, great, until the return to the House.

    Put on wireless and cannot connect, I tried everything and had to resort to a cable connection.

    I noticed when you use Toshiba cordless tool it is to see the connection to the router, but stops to Lappy with!

    It has been considered a clean install, but this seems drastic.

    * Help please *.

    Using XP or Vista?

    Try this:

    (1) what a reception/interference problem? Try moving the laptop or a Wifi access Point

    (2) download and install the latest wireless drivers from the Web from Toshiba site

    (3) try to disable the Windows Firewall or your 3rd party firewall

    (4) use static IP addresses, instead of using the DHCP (dynamic IP address)

    (5) update the Firmware of your Wifi access Point. (download from the manufacturer's website)

  • Satellite A100 PSAA9C does not work without the battery inside

    I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

    The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

    If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

    If I do this a couple times, the machine will be not even by post before turning off.
    If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
    If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

    As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

    Thank you.

    Hello

    If I understand your assignment, the laptop does not power up without the battery
    But it will light if the battery is connected.

    The question is; Is the power led on if the AC adapter is plugged?
    If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

    I think you should test a new adapter. Maybe it helps!

Maybe you are looking for