After having upgraded to windows 8 pro, digital keys no longer work.

Similar Questions

• Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

  Hello! I have a problem after having upgraded to Windows 10. Please help me.

  I upgraded the operating system to Windows 10 by windows update.

  After that, I had some problems with language settings keyboard, so I have made a new account.

  Now in my PC, there is first CS6, CC, CC2014, CC2015.

  After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

  When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

  Import M2TS is possible in CC.

  I want to know how to fix it.

  Trash all your media cache. Rename the folder in the files, and then try again.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• AMD Rrdeon HD 7400 - models of HP pavilion G6 1117tx graphics card now works correctly after the upgrade of windows 8 Pro.

  Hello

  I have hp Pavilion G6 model 1117tx.  I have upgraded from windows 7 to windows 8 Pro. After the upgrade, I observed that on right click option, I didn't fine CCC and Configure with the graphic option switachable is missing. so please help me how can I solve DIF relationg AMD redeon 7400 grphic card and intel option hd switchable hd 3000 series grphic.

  Help, please...

  Patel Mounal

  (1) have you read full sheet of your Hp pavilion?

  (2) otherwise average, first downlaod read the documents at the bottom of link

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?CC=US&DLC=en&LC=en&Product=5118185&Query=HP%20pavilion%20G6%201117tx%20&Tool= &

  (3) these manuals may be contains details of compatible video graphics cards

  sufficient capacity

  (4) and check that your graphics card is compatible with the motherboard and current operating system

  (5) read the technical specifications of AMD Rrdeon HD 7400

  http://www.AMD.com/us/products/notebook/graphics/7000m/7400m/pages/Radeon-7400m.aspx#2

  (6) see amd graphics software drivers FAQ, see link below

  http://support.AMD.com/us/KbArticles/pages/AMDGraphicsSoftwareandDriversFAQ.aspx

  (7) downlaod and install AMD autopilot below link detection tool

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  (8) download and install the latest drivers from AMD catalyst HD 7000 series, choose current

  operating system at the bottom of the link

  http://sites.AMD.com/us/game/downloads/pages/downloads.aspx

  Restart your system

  Guilbert

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?

• SimplePass 2012 stuck during installation after the upgrade to windows 8 pro

  Hello!

  I just upgraded my Pavilion dv6-6145dx to windows 8 pro and new installation preforming. I downloaded all the drivers and software from the hp support center, but when I tried to install SimplePass

  2012 stuck it in the middle of the progress of the installation for about 4 hours as shown below:

  

  Will I keep waiting? Or there is a solution knowing that I found its icon in the start menu?

  Thank you!

  Samuel Farid

  I installed the windows 7 one instead of. In any case, I fixed that by closing the Task Manager installation program, that the I started the software in the start menu, and believe it or not, it worked great. There is another way to solve this problem of Morphix, site Web AuthenTec software, it is much more updated and working great.

• Internet connection problem hp dv6-1127ee after having upgraded to windows 7 ultimate

  I upgrade my windows vista to windows 7. Everything went well but I can't access the internet wireless or cable. I try manything as IP reset or uninstall the driver. Also install the updated hp website driver. I tried safe mode and connection! What should I do?

  Hello

  If it connects in safemode, then it could happen due to the software antivirus installed on the computer.

  First try to connect again by turning off the antivirus or any security software installed on the computer or perform a clean boot >

  If it works then uninstall - reinstall the security software and update.

• My Windows 8 Pro product key does not work to activate my copy of Windows 8 Pro

  My work of Windows 8 product key is not

  Step 1: Yesterday I bought a new hard drive clean Virgin and I bought Windows 8 Pro at a local big-box store. It is a complete copy. Not an upgrade.

  Step 2: I removed all the other my system HARD drives and installed Windows 8 on the new hard drive. The system asked product key. I went in and everything installed perfectly. Windows works fine. I like it.

  Step 3 However, when I went to 'activate' my copy of Windows 8 and I enter this SAME product key, that I used to install I get the following message "this key did not work. Check it out and try again, or try a different key. "I repeated this step at least 4 different times after the reboot. Still does not accept it.

  Question: I can not activate my new copy of Windows 8. How can he accept my key for installation and then NOT accept for activation?

  Help!

  JWM

  The problem was solved!

  Step 1: I called Microsoft support MICRSOFT (800)

  Step 2: I navigate through all voice menus for installation tech Support for Windows 8

  Step 3: I explained the problem to the technology (Jerry)

  Step 4: The tech had me find the search function and he get a function of 4 letters (I forgot the command). I executed the function, and I got to a screen that asked me to enter a code for the Microsoft Technical Professional. I entered the 8 digit code that the tech provided for me.

  Step 5: I get to a new screen and technology (Jerry) explains that I am turned on.

  Step 6: I restart my PC and I go to the 'System' page in the control panel and it shows that my copy of Windows 8 is activated!

  The Tech explained that my copy of windows is an "upgrade" version (it isn't) and that is why I got the sentence. I explained repeatedly that it was a COMPLETE copy.  Finally, I dropped my 8 Windows has been activated.

  Call the technical support and good luck!

• Windows 8 Pro product key does not work

  I get this error message: "this product key has not worked. Please check it and try again"

  
  
  Just bought the Windows 8 Pro in Windows 7 home premium upgrade.  Fresh installed from a USB...

  Got mine sorted... I called customer service... you guys can check it out here for your countries respective http://support.microsoft.com/gp/customer-service-phone-numbers

  So yes... to explain the situation, they will provide you with this diagnostic package... click on the package, reset your comp... and you should be able to activate your shiny new operating system... they were quick to fix my problem... Bravo to them... hope it helps = D

  Method for those who don't want phone customer service:
  Your key is a unique key for update... meaning that it will not allow a new installation... unless you do the workaround of Windows 7 registry.

  You must open a run dialog box and type: "Regedit".

  Then I located this key:

  HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE /.

  And find one called "MediaBootInstall.

  Double-click that and change a 1 to 0.

  Then open cmd as administrator

  Type the command "slmgr /rearm.

  You will get a restart of your computer messge.

  Restart

  Then when you restart your computer, you open a dialog box run again and type "slui.exe 3" and it will allow you to enter your product key and activate :)

• upgrade to windows 8 and blue-ray no longer works

  I have a HP elite hpe 570f clubhouse and I have upgraded to windows 8 and the blue-ray player no longer works.

  Do you mean that the optical drive is no longer at all, or simply that he does not play Blu - ray discs? Windows 8 does not include any software that can play BD movies. Check whether the player can play a music CD, and if it is possible, you can probably just download the third-party BD playback software to play BD movies.

• No sound after having upgraded to Windows Media Player 11.

  Original title: downloaded media player 11 version and there is no sound very low background noise music... volume on and more... What do I do?

  downloaded the upgrade of media player 11 and now I have no sound... volumes are all on and high... just hear a light background music being played... what should I do?

  Hello

  Just reply to us with the following details.

  (1) what version of the Windows operating system you have installed on your computer?

  (2) you are able to listen to music using another application?

  (3) don't you make changes to the settings of the sound before this problem?

  Follow the steps in the link given below.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  We are in need of more information about the issue. Please email us with the details asked, so that we can understand the question better to help you.

• After the upgrade to Windows 8 Pro, I lost all bookmarks in FireFox. Favorite Internet Explorer are intact. How can I restore bookmarks firebox?

  Internet Explorer Favorites are intact, but Firefox bookmarks disappeared. Shady shot from Microsoft!

  OK, so I found my backups. That's how I did it.

  1 make sure you can see hidden files/folders - in Explorer in Windows 8, click view, and then make sure that "hidden object" is checked

  2. go to:
  \AppData\Roaming\Mozilla\Firefox\Profiles\c9i1rqwk.default\bookmarkbackups C:\Windows.old\Users\ < yourusername >

  3. I copied the newest .json file from here to my office

  4. open Firefox, then open the bookmarks library

  5. click on import and backup, and then restore, then "Choose file". Identify the .json your desktop file.

  That's what me sorted. If all goes well it can help you.

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Thunderbird impossible sendmail on mail server yahoo after upgrading to Windows 7 Pro on an ASUS BP1AD PC. Tried 31.2 24.6 configured in IMAP &amp; Thunderbird.

  After recently upgrading to Windows 7 Pro on an ASUS BP1AD PC, I can receive emails but NOT send using the yahoo mail server. I am set up to use the IMAP protocol. Other e-mail servers/accounts do not have this problem. I get the error message right is an alert which States: "an error has occurred when sending mail. The mail server responded: unverified address - see http://help.yahoo.com/I/us/yahoo/mail/manage/sendfrom-07.html. Please make sure your e-mail address is correct in your mail preferences and try again"if my email in Thunderbird is good enough upward with i. sending messages. Is there something obvious that I'm missing?

  did you actually check your mailing address in your web account to yahoo? That is to say had them send you a special courier to check that it actually works? Sounds stupid, but they made me do it years ago.