After hibernation PC does not connect to the network until the 'Diagnose' button
My PC Win 7 x 64 did for about 6 weeks, and it's a little annoying:
After waking up from hibernation, there is no network connection. I'm behind a router and it gives IP addresses. The problem looks superficially like the IP is not renewed... but this isn't the issue of the root. If I open the network and sharing Center, my network card and click on "diagnose" everything started working. Here is the text of the event log.
If I configured the IP to be static (on the area no DHCP on the LAN), then the LAN adapter will not recover a hibernation. It is as if she is locked inside.
Someone at - it ideas (or how can I run the Diagnostics of command line)?
The Network Diagnostics Framework completed the stage of diagnosis of the functioning. The following repair option was proposed:
The helper class name: AddressAcquisition
Cause: your computer has a local IP address
You might not be able to access the Internet or some network resources.
Root Cause Guid: {245a9d66-ae9c-4518-a5b4-655752b0a5bd}
Disturbances: reset the adapter "Local 2 network connection"
This can sometimes solve intermittent problems.
RepairGuid: {07d37f7b-fa5e-4443-bda7-ab107b29afb9}
Seconds required for repair: 70
Security context required for repair: 80
Interface: Connection to the network space 2 ({748a5fd8-c314-482a-8ced-b0923a1ec97e})
Hello
Select the network option while the computer is in hibernation.
Number of similar questions:
http://forums.Dlink.com/index.php?topic=47470.0
http://justaddwater.dk/WP-content/uploads/2007/07/Lenovo-wireless-problems-after-standby.PDF
Tags: Windows
Similar Questions
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
Does not connect with the e-mail server after update.
Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.
I use Thunderbird version 38.1.0.
Thank you.
The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.
Until the next problem...
-
I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.
The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.
Any help? Please, I beg you.
Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...
-
I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter. The laptop Internet access was fast and stable when using a Wi - Fi N. Its pilot AR9285 was the initial version of the 8.0.0.172 factory. But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe). However, after updating the driver, I immediately lost Internet access. The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.
The driver seems to be installed OK, but it does not connect to the Internet. Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly. (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected. Here are the results of the IPCONFIG/all command:
C:\Users\Karen>ipconfig/all
Windows IP configuration
Name of the host...: KarensLaptop
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Ethernet connection to the Local network card:
State of the media...: Media disconnected
Connection - a DNS suffix is specific. :
Description...: Realtek PCIe FE Family Controller
Physical address: 00-26 - 9th - JJ - 83 - 9 c
DHCP active...: Yes
Autoconfiguration enabled... YesTunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:
State of the media...: Media disconnected
Connection - a DNS suffix is specific. :
... Description: Microsoft ISHTHP adapter
Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
DHCP active...: No.
Auto connection...: YesMap of tunnel Teredo Tunneling Pseudo - Interface:
State of the media...:...: media disconnected
Connection - a DNS suffix is specific. :
... Description: Teredo Tunneling Pseudo - Interface
Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
DHCP active...: No.
Autoconfiguration enabled...: YesC:\Users\Karen >
(3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."
I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet. I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N. Even back to the original driver version 8.0.0.172 provides an Internet connection.
Any advice would be appreciated.
Hello:
I'm glad that you were able to restore your internet connection.
I'd go with the latest driver HP vice one from another source.
The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.
My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.
Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.
-
Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.
You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.
-
TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?
Please check your anti-virus software.
He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird. -
Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.
The airport connects using DHCP in Bridge Mode
The router address is 192.168.80.1
Address IPv4 is 192.168.80.2
DNS server is the same as the router, but grayed out
Mac Mini IPv4 Address is 192.168.80.3
IPv6 automatically configures
Also updated the firmware of the airport; no change.
ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.
Any ideas to fix?
Thank you.
Post edited by: en maschera
but my my Mac mini does not connect to the internet.
The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.
Hello
Network preferences may be damaged.
Open the Finder. In the Finder menu bar, click go > go to folder
Type or copy paste the following text:
/ Library/Preferences/SystemConfiguration
Click OK, and then move all files in the SystemConfiguration folder to the trash.
Restart your Mac. See if that makes a difference.
Your Mac will generate a new SystemConfiguration folder for you.
Then open AirPort Utility located in HD > Applications > Utilitiies
Make sure that both Internet and Extreme are green.
-
Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server
HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.
I installed Windows 10 once again. After installing HP Support Assistant work.
-
Hello
I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.Any suggestions?original title: connectivity LimetedThe zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.
Your messages are a bit terse, but if I understand correctly
- You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
- All but one of these computers can reach successfully from the Internet via the router.
- A computer that can't browse the Internet is connected to the router via an Ethernet cable.
- You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
- You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
- You have installed Windows XP Service Pack 3 (or at least Service Pack 2)
Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:
Open a command prompt window (start > run > cmd > OK)
Type the following lines and press ENTER after each lineNetsh reset winsock catalog
netsh int ip reset c:\resetlog.txtClose the command prompt window and restart the computer.
-
Original title: Family Tree Maker does not connect on the Web dashboard.
My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date. He has always worked so far? Comes with the following message if I try to do anything that involves the net.
"Auntentication with the server failed.
Hi HelenTL,
You did changes to the computer before this problem?
If you have any software security & firewall installed, disable them temporarily and check if the problem persists.
Note: check to allow them back on the computer after you complete these steps.Hope the helps of information.
Please post back and we do know. -
I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you
Hello
Maybe this can help.
These steps and tell us where is the breaking point.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Samsung Galaxy S3 does not connect to the DELL laptop
Hello
I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop
We could not see the content of Samsung Mobile in the PC. No Popup message is coming
I tried the options below
1. connected with different cable to the laptop, the original cable
2. try with Samsung Kies
Can you please help us in this regard that I wasn't sure if the drivers problem.
We have seen the error in the mobile below.
"Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.
You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »
I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop
Thank you
Kalyan
Hi Kalyan,
From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.
Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.
I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.
To uninstall a program see the link below.
Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.
-
Hello everyone; Does anyone know why the app GET MORE on this printer Hp Photosmart Premium Web C309n does not connect to the internet? All other applications are connected ok. The site is down? someone knows something about it? HP is the fixation of this hopefully soon? Thanks for any info.
I am very sorry for your difficulties.
You can try the following, if you please, of your printer face:
Setup (wrench on sceen House of printer)
Web
Updates
Product updates
Accept the update of product offered.
Please let us know:
(1) if he is offered an update of product, and if so, it ends correctly?
(2) receives more work after the update?
In the future you can keep your FW up-to-date more easily by selecting the option 'Automatically' for the settings of update of product in the update section of the product in the Web menu.
Key
Web
Updates
Product update settings
Select "automatically".
-
Hello
See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.
If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately
Tried add/remove the NIC of the model
Tried to move the comments on different hosts
Tried to create a new template from scratch
NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.
Anyone seen this before?
I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)
Maybe you are looking for
-
Impossible to use the keys FN on my Satellite S50T-A-10Z
H? I have a Toshiba Satellite S50T-A-10Z. I've recently updated the BIOS. After the update, I realized that I can not use the FN keys. And also I can't turn off my keyboard background light. Before the update, I was able to do by pressing on FN + z.
-
Satellite A300 with strange power problem
My laptop is about a month and a couple of weeks he began to move to the power of the battery without reason. It goes back to food if I unplug it and plug it back, or if I take the power supply cable and put it back in. It does not help if I restart
-
Original title: Media Center 2005 Edition I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off. Now whenever I try to watch live TV, the pr
-
DV6247EA HP (DV6000) processor upgrade
Hi, I changed the cpu fan lately in my HP Pavilion DV6247ea by myself and I've noticed I T5200 Intel cpu onboard. Is it possible to substitute T7200 processor in this model?
-
Put yourself in AAA for authentication of slow local emergency
Hello I'm testing the ACS servers and aaa by an admin on a test switch identification using Ganymede +. Everything works fine but I noticed when I block access to my switch test on our two ACS servers, local connection works, but is very slow. I do t